Appelez-nous au 1-888-826-6342
High Performance, Top Mount Accelerometers
Premium Grade Top Mount Accelerometer
Remises de volume disponibles
Calendrier de remise sur volume
| Quantité | Prix unitaire |
|---|---|
| 1-9 | C$565.14 |
| 10-24 | C$536.88 |
| 25-49 | C$525.58 |
| 50-99 | C$502.97 |
| 100-199 | C$491.67 |
| 200+ | C$480.37 |
Ajouté à votre panier
Configuration terminée.
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Échec de l'enregistrement des configurations, cliquez sur le bouton Configurer Recommencer
- Premium Grade
- Intrinsic Safety Certified Options
- Hermetic Design
- ESD Protection UReverse Wiring Protection
ACC793 Options de modèles
Voir tous les modèlesModifiez ces spécifications pour commander un modèle différente. Toutes les combinaisons ne sont pas valides. Les options compatibles avec les sélections précédentes seront en gras.
*Les options en surbrillance ne sont pas compatibles. Veuillez sélectionner une combinaison différente.
Acceleration Range
Frequency Range (Nominal)
Output Type
Mounting Type
Features
The OMEGAROMETER™ Series accelerometers are designed for industrial vibration measurements. These accelerometers feature a hermetically sealed 316L stainless steel case suitable for harsh environments. The ACC793 is a high performance accelerometer with a top cable exit. FM and CSA intrinsic safety approval is an available option.
SPECIFICATIONS:
DYNAMIC
Sensitivity, ±5%, 25°C (77°F): 100 mV/g
Acceleration Range: 80 g peak
Amplitude Non-Linearity: 1%
Frequency Response:
±5%: 1.5 to 5000 Hz
±10%: 1.0 to 7000 Hz
±3 dB: 0.5 to 15,000 Hz
Resonance Frequency: 25 kHz
Transverse Sensitivity, Max: 5% of axial
Temperature Response: -50°C (-58°F) = -10%; 120°C (248°F) = 5%
ELECTRICAL
Power Requirement:
Voltage Source: 18 to 30 Vdc
Current Regulating Diode1: 2 to 10 mA
Electrical Noise (Equiv. g, Nominal):
Broadband: 2.5 Hz to 25 kHz: 600 µg
Spectral:
10 Hz: 8 µg/√Hz
100 Hz: 5 µg/√Hz
1000 Hz: 5 µg/√Hz
Output Impedance, Max: 100 Ω
Bias Output Voltage: 12 Vdc
Grounding: Isolated case, internally shielded
ENVIRONMENTAL
Temperature Range: -50 to 120°C (-58 to 248°F)
Vibration Limit: 500 g peak
Base Strain Sensitivity, Max: 0.0005 g/microstrain
Sealing: Hermetic to 10-8 cc/s
PHYSICAL
Weight: 112 g (3.9 oz)
Case Material: 316L SS
Mounting: ¼-28 tapped hole
Output Connector: 2 pin, MIL-C-5015 style
Connections:
Pin A: Power/signal
Pin B: Common
Mating Connector: Amphenol 97-3106A-10SL-4S type
Recommended Cabling: ACC-CB7-10
Agency Approvals:
FM: Class I, II, III, Division I, Groups A, B, C, D, E, F, G; Division II, Groups A, B, C, D, F, G
CSA: Class I, Division I, Groups A, B, C, D
SPECIFICATIONS:
DYNAMIC
Sensitivity, ±5%, 25°C (77°F): 100 mV/g
Acceleration Range: 80 g peak
Amplitude Non-Linearity: 1%
Frequency Response:
±5%: 1.5 to 5000 Hz
±10%: 1.0 to 7000 Hz
±3 dB: 0.5 to 15,000 Hz
Resonance Frequency: 25 kHz
Transverse Sensitivity, Max: 5% of axial
Temperature Response: -50°C (-58°F) = -10%; 120°C (248°F) = 5%
ELECTRICAL
Power Requirement:
Voltage Source: 18 to 30 Vdc
Current Regulating Diode1: 2 to 10 mA
Electrical Noise (Equiv. g, Nominal):
Broadband: 2.5 Hz to 25 kHz: 600 µg
Spectral:
10 Hz: 8 µg/√Hz
100 Hz: 5 µg/√Hz
1000 Hz: 5 µg/√Hz
Output Impedance, Max: 100 Ω
Bias Output Voltage: 12 Vdc
Grounding: Isolated case, internally shielded
ENVIRONMENTAL
Temperature Range: -50 to 120°C (-58 to 248°F)
Vibration Limit: 500 g peak
Base Strain Sensitivity, Max: 0.0005 g/microstrain
Sealing: Hermetic to 10-8 cc/s
PHYSICAL
Weight: 112 g (3.9 oz)
Case Material: 316L SS
Mounting: ¼-28 tapped hole
Output Connector: 2 pin, MIL-C-5015 style
Connections:
Pin A: Power/signal
Pin B: Common
Mating Connector: Amphenol 97-3106A-10SL-4S type
Recommended Cabling: ACC-CB7-10
Agency Approvals:
FM: Class I, II, III, Division I, Groups A, B, C, D, E, F, G; Division II, Groups A, B, C, D, F, G
CSA: Class I, Division I, Groups A, B, C, D
RoHS 2015/863 - Voir le certificat
Approuvé CE
UKCA
It is not completely clear from the spec sheet how the ACC793 should be wired up. How is it intended for the power to get in, and for the signal to get out, through the same pin? Is there a sample circuit or application note available anywhere?
The ACC793 accelerometer is part of a system consisting of the accelerometer, a cable from the accelerometer (ACC-CB7-10) to an in-line constant current power supply (ACC-PS5). You will also need an output cable with a BNC connector to connect to the device you will be using to read the signal. We do not offer the output cable.
Date published: 2023-09-27
Are the Accelerometers able to be adjusted to a more limited peak g force range? say 10g, or changing the sensitivity of the device from 100mV/g to 500mV/g?
Thank you for your question. Unfortunately, the accelerometers are not able to be adjusted. The sensitivity and hence the g range is fixed. Please contact our Tech Support if you have any future questions we can assist you with.
Date published: 2019-04-12
Accessories