Parallel Pneumatic Grippers Miniature Series Highly Configurable

Parallel Pneumatic Grippers Miniature Series

4,5

(2)

Parallel Pneumatic Grippers Miniature Series

Cliquez et maintenez pour zoomer

Fiche technique (PDF)

C$886.05

Article# RPM-1M

Remises de volume disponibles

Calendrier de remise sur volume

Quantité	Prix unitaire
1-9	C$886.05
10-24	C$841.75
25-49	C$824.03
50-99	C$788.58
100-199	C$770.86
200+	C$753.14

Qté

Ajouté à votre panier

En stock

Délai de livraison (si pas en stock): 12 semaines

Ajouter à la liste des projets

Pneumatic Parallel Mini Gripper Available in 3 Stroke Lengths
Precision Gripper-Preloaded V Roller Bearings Eliminate Side Play Resulting in Excellent Part Positioning
Gripper Accuracy of 0.05 mm (0.002') and Repeatability of 0.03 mm (0.001')
Rated Grip Force @ 7 Bar (100 psi), 36 N (8 lbs)

Voir Spécs

RPM-1M Options de modèles

Voir tous les modèles

Modifiez ces spécifications pour commander un modèle différente. Toutes les combinaisons ne sont pas valides. Les options compatibles avec les sélections précédentes seront en gras.

*Les options en surbrillance ne sont pas compatibles. Veuillez sélectionner une combinaison différente.

Jaw Opening

Grip Force

Specs

Modifier les options du modèles

RPM Series Gripper is a miniature pneumatic parallel gripper with excellent parallelism and accuracy between the gripper mounting surface and jaw surface. Jaws are front mounted and are supported with 'Dual-V' roller bearings to provide low friction motion and are preloaded for maximum support and zero side play. RPM Pneumatic Grippers are top mounted and have air ports on the side or top for manifold mounting to keep the air line away from the gripper area. These grippers are available in stroke lengths from 3.2 to 6.3mm (0.13 to 0.25') with a gripper force of 36 N (8 lbs).

Pneumatic linear motion pneumatic components are double acting air cylinders that require a dry air supply with filtering to 40 microns or better. For best control of pneumatic components, flow control valves (regulating out) should be installed to regulate the speed of the device.

SPECIFICATIONS
Pneumatic Specifications
    Pressure Operating Range: 3 to 7 bar (40 to 100 psi)
    Cylinder Type: Double acting
    Dynamic Seals: Internally lubricated Buna-N
    Valve Required to Operate: 4-way, 2-position
Air Quality Requirements
    Air Filtration: 40 micron or better
    Air Lubrication: Not necessary*
    Air Humidity: Low moisture content (dry)
Temperature Operating Range
    Buna-N Seals (Standard): -35 to 80°C (-30 to 180°F)
    Viton® Seals (Optional): -30 to 120°C (-20 to 250°F)
Maintenance Specifications*
Expected Life:
    Normal Application: 5 million cycles
    With Preventative Maintenance: 10+ million cycles*
Field Repairable: Yes
Seal Repair Kits Available: Yes
*Addition of lubrication will greatly increase service life.

All Models

In Stock Only

passer en revue

Rated 4 out of 5 by MOTEDE from CSR excellent product - great company - products - service.

Date published: 2024-04-19

Rated 5 out of 5 by Ruben from Its the best gripper for very small objects. We used for over molding process on an injection molding facility making auto parts, We do recommend it!

Date published: 2018-05-29