24-Channel OPTO-Isolated Input Board w/ Digital Input Channels

24-Channel OPTO-Isolated Input Board

0,0

(0)

Cliquez et maintenez pour zoomer

Fiche technique (PDF)

C$747.03

Article# OME-DB-24PD

Remises de volume disponibles

Calendrier de remise sur volume

Quantité	Prix unitaire
1-4	C$747.03
5-9	C$709.68
10-24	C$694.74
25-49	C$664.86
50-99	C$649.92
100+	C$634.98

Qté

Ajouté à votre panier

En stock

Délai de livraison (si pas en stock): 3 semaines

Ajouter à la liste des projets

Optically Isolated Digital Input Channels
Connects Directly to OME-PIO-D144
AC/DC Signal Input
AC Signal Input with Filter

Voir Spécs

OME-DB-24PD Options de modèles

Voir tous les modèles

Modifiez ces spécifications pour commander un modèle différente. Toutes les combinaisons ne sont pas valides. Les options compatibles avec les sélections précédentes seront en gras.

*Les options en surbrillance ne sont pas compatibles. Veuillez sélectionner une combinaison différente.

Number of Inputs

Input Type

Output Type

Other Features

Specs

Modifier les options du modèles

The OME-DB-24P is a 24 channel isolated digital input daughter board for OME-PIO-D144 digital input board. The optically isolated inputs of the OME-DB-24P consist of a bi-directional opto-couples with a resistor for current sensing. You can use the OME-DB-24P to sense DC signals from TTL levels up to 24 V. You can also use OME-DB-24P to sense a wide range of AC signals. The OME-DB-24P registers a constant logic high if the frequency of the input AC signal is greater or equal to 1 kHz, and if the voltage of the AC signal is at least 4 Vrms. If you are using an AC input signal, you must short the AC filter jumper. You can use the board to isolate the computer from large common-mode voltages, ground loops and voltage spikes that often occur in industrial environments.

Specifications
I/O CONNECTOR ELECTRICAL SPECIFICATIONS
Configuration: 24 optically isolated digital input channels
Compatibility: TTL compatible
Connector: OME-DB-24P, one 50-pin header; OME-DB-24PD,
one 50-pin header and one 37-pin D-sub connector

DIGITAL INPUT
Number of channels: 24, each with
its own ground reference isolated from other channels
Maximum Input Voltage: 24 Vdc or 24 Vac
Input Impedance: 1.2 K Ω

SOURCE CURRENT
5 V inputs: 4 mA per channel (min)
24 V inputs: 20 mA per channel (min)
Response Time: 20 µs without filter/2.2 ms with filter
Power Supplies: +5 V @336 mA max
Dimensions: 132 H x 220 mm W (5.2 x 8.7")
Operating Temperature: 0 to 60°C (32 to 140°F)
Storage Temperature: -20 to 70°C (-4 to 175°F)
Humidity: 5 to 90% RH non-condensing

All Models