The OMEGA™ iSD environmental monitor provides Web-based remote surveillance of environmental conditions in critical HVAC applications such as computer server rooms, clean rooms, laboratories, museums, warehouses, or any remote facility. View and record Temperature, Relative Humidity and Dew Point over an Ethernet network or the Internet with no special software—just a Web browser.
Email Alarms The device can trigger an alarm if temperature or humidity goes above or below a set point that you determine. Your alarm can be sent by email to a single user or to a group distribution list, including text messages to cell phones and PDA’s.
Physical Threats The iSD includes screw terminals for two contact closures that work with common alarm sensors. You can instruct the iSD monitor to send an alarm if a door is opened, a window is broken, or a fire sprinkler goes off.
Power Failure The iSD monitor can trigger an alarm if the AC power fails. The iSD monitor will continue to collect data for two days powered by a standard 9 Volt alkaline battery (included). A failure on the Ethernet network will not interrupt data recording.
Local Alarms The iSD monitor includes two 1.5 Amp output relays that are controlled by the alarm conditions you select. The relays can trigger flashing lights and a siren for example to alert personnel near the scene. With the easy Web-based setup page, the two relays can be programmed for any combination of temperature or humidity, and high or low set points, as well as alarm conditions triggered by contact closures. The relays can also be programmed to turn off when conditions return to normal, or programmed to remain latched and require a manual reset.
View Charts and Graphs on the Web The iSD serves Active Web Pages to display real time readings, display charts of temperature and humidity, or log data in standard data formats for use in a spreadsheet or data acquisition program such as Excel or Visual Basic.
The virtual chart viewed on the web page is a JAVA Applet that records a chart over the LAN or Internet in real time. With the iSD, there is no need to invest time and money learning a proprietary software program to log or chart the data.
Chart scales are fully adjustable on the fly. For example, the chart can display one minute, one hour, one day, one week, one month or one year. Temperature and humidity can be charted across the full span (-40 to 124°C, and 0 to 100% RH) or within any narrow range such as (20 to 30°C).
Link to Web CAM or IP Camera The Web page includes a link to a "Web Cam" or "IP camera" (not included). If you get a message about an alarm condition, you can quickly click on the link to view the actual scene over the Internet.
SD Flash Memory Card The iSD comes complete with a removable SD Flash Memory card that can store up to years of readings taken at ten second intervals.
Records on SD Flash Cards The data is recorded on widely available SD (Secure Digital) flash cards. The format is a simple “.txt” text file that is easily imported to spread sheets and other programs. It can be read directly on a PC or MAC with a USB card reader. You can also download the data remotely over an Ethernet network or the Internet.
Sensor and Calibration The iSD monitors come complete with a plug-in temperature and humidity probe that mounts on the instrument or separately with the six foot extension cable (included). It is not necessary to take the iSD monitor out of service for routine calibration. The temperature/ humidity sensors are interchangeable and can be replaced for about the same cost as a typical calibration. Omega offers replacement sensors with optional 3-point NIST traceable calibration certificates. Installation and operation of the iSD monitor requires no special training, tools, or software. The device connects to any Ethernet network with standard cable and plugs and is powered by any AC outlet supplying 110 to 240 Vac.
Award-Winning Technology The iSD is simple to install and use, and features Omega’s award-winning iServer technology that requires no special software except a Web Browser.
The iSD connects to an Ethernet Network with a standard RJ45 connector and sends data in standard TCP/IP packets.
It is easily configured with a simple menu using a Web Browser and can be password protected. From within an Ethernet LAN or over the Internet, the user simply types its IP address or an easy to remember name such as "Cleanroom 5" or "Midwest Server Room" in any Web Browser, and the iSD serves a Web Page with the current readings.
Typical Applications The iSD is great for monitoring temperature + humidity in applications such as: clean rooms, computer rooms, HVAC systems, pharmaceutical and food processing and storage, hospitals, laboratories, semiconductor fabs, electronic assembly, warehousing, museums, manufacturing, greenhouses, farm animal shelters, and many more.
RELATIVE HUMIDITY SENSOR Accuracy/Range at 25°C- Non-Condensing: ±2.75% for 10 to 90%; ±3% for 5 to 10% and 90 to 95%; ±4% for 0 to 5% and 95 to 100% Non-linearity: ±3% Hysteresis: ±1% RH Response Time: 8 seconds, tau 63% Repeatability: ±0.1% Resolution: 0.1%, 12 bit
TEMPERATURE SENSOR ACCURACY/RANGE* Wand Probe: ±0.5°C (±1°F) for 5 to 45°C (41 to 113°F); ±0.5 to ±1°C (±1 to ±2°F) for 0 to 5°C and 45 to 60°C (32 to 41°F and 113 to 140°F) Industrial Probe: (see chart in manual) ±0.5°C (±1°F) for 5 to 45°C (41 to 113°F); ±0.5 to ±1.5°C (±1 to ±2.7°F) for -40 to 5°C and 45 to 124°C (-40 to 41°F and 113 to 255°F) *Note: extended temperature range is for Ind. probe only, the iServer’s operating temperature is 0 to 60°C Response Time: 5 to 30 secs, tau 63% Repeatability: ±0.1°C Resolution: 0.1°C, 14 bit Standard Probe Dimensions: Ø13 x 83.8 mm L (Ø 0.5 x 3.3" L)
INDUSTRIAL PROBE iSD-THP-5 Probe: Ø16 x 137 mm L (0.63 x 5" L) Housing Material: SS 316 Cable Length: 3 m (10') Cable Operating Temperature: -40 to 125°C (-40 to 257°F)
INTERFACES Ethernet (RJ45): Fixed or autonegotiating 10/100BASE-T, Auto MDI/MDIX Sensor: Digital 4-wire (DB9) Protocols: TCP, UDP, SNMP, SMTP, NTP, ARP, ICMP, DHCP, DNS, HTTP, and Telnet LCD Display: 32 digits 4.8 x 9.7 mm (0.19 x 0.38") SD Flash Memory Card 2 GB Card: 8 months of data storage at 1 second recording intervals or 7 years at 10 second intervals Relay Outputs: Two relays 1.5A @ 30 Vdc Alarm I/Os: Two contact inputs TTL 0.5mA with 10K pull-up; one open collector output 150mA @ 30Vdc Embedded WEB Server: Serves WEB pages containing real-time data and live updated charts within definable time intervals
POWER Input: 9 to 12 Vdc AC Power Adaptor (Included): Input: 100 to 240 Vac, 50/60Hz Nominal Output: 9 Vdc @ 0.5 A Consumption:4W max. Back-Up Battery: 9 Vdc, Alkaline (included)
Universal ac Power Adapter
ENVIRONMENTAL Operating Temperature: iServer Unit: 0 to 60°C (32 to 140°F) Battery: -18 to 55°C (0 to 131°F) ac Adapter: 0 to 40°C (32 to 104°F) Packaging Weight: 490 g (1.08 lb) Material: SS 304 case with wall mount bracket Dimensions: 119.1H x 155.7W x 33.3D mm (4.69 x 6.13 x 1.31 in) includes probe
REPLACEMENT PROBES & CALIBRATION CERTIFICATES No need to take your unit out of service to get re-calibrated, order a calibrated probe instead.
Optional Probe Caps shown, fits industrial or wand probe
Get a NIST Traceable Calibration Certificate with your Calibrated Replacement Probe.
Rated 5 out of
Perfect peformancegreat performance, easy to use, nice design and easy to install and configure
Date published: 2017-12-05
Rated 4 out of
Works well !!It is a little pricey but it does work as advertised. The backup battery does not last long is my only problem
Date published: 2018-10-29
Rated 5 out of
Jose Acosta from
Great FeaturesI bought this a month ago and i`m so happy that i did
Date published: 2018-07-27
Rated 1 out of
Frustrated and dissappointedIt would be a great product if the manufacture would be willing to supply the end user with proper instructions so the product will work as it was designed. In the title description it says " Environmental Monitoring and Recording over the Internet" But the manufacture lacks the knowledge to help make the product work as designed.