Appelez-nous au 1-888-826-6342
Compact Portable USB Data Loggers
Portable Temperature and Humidity Data Loggers
Remises de volume disponibles
Calendrier de remise sur volume
Quantité | Prix unitaire |
---|---|
1-4 | C$225.93 |
5-9 | C$214.63 |
10-24 | C$210.11 |
25-49 | C$201.08 |
50-99 | C$196.56 |
100+ | C$192.04 |
Ajouté à votre panier
Configuration terminée.
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Échec de l'enregistrement des configurations, cliquez sur le bouton Configurer Recommencer
- Modèles pour la température (OM-91) et la température/humidité (OM-92)
- Options de calibrage à faible coût
- Démarrage immédiat, retardé (date/heure spécifique) ou bouton poussoir
- Mode en temps réel
- Alarmes haut et bas configurables par l''utilisateur
- Voyants DEL d''état
- Interface USB pour un transfert de données rapide
- Compact, léger, simple d''utilisation
- Batterie longue durée
OM-92-NIST Options de modèles
Voir tous les modèlesModifiez ces spécifications pour commander un modèle différente. Toutes les combinaisons ne sont pas valides. Les options compatibles avec les sélections précédentes seront en gras.
*Les options en surbrillance ne sont pas compatibles. Veuillez sélectionner une combinaison différente.
Measurement Type
Number of Measurements
Additional Feature
Input Type
Maximum Samples
Power
Data Interface
Max Sampling Rate
Description
La série OM-90 propose des enregistreurs de données portables, alimentés par batterie, de température (OM-91) et température/humidité (OM-92). La température est mesurée avec une précision de ±0,3°C sur une plage de 5 à 60°C et de ±2.0°C sur la plage complète, de -30 à 80°C. L'humidité relative est mesurée avec une précision de ±3,0 % HR sur la gamme HR 20 à 80 % et de ±5,0% HR sur la plage HR de 0 à 100 % HR. La température comme l'humidité relative sont enregistrées à une fréquence d'enregistrement configurable par l'utilisateur à sélectionner par l'intermédiaire d'un logiciel.Ces enregistreurs de données sont idéaux pour des applications de transport lorsqu'il est nécessaire d'attester que le matériau transporté est resté dans des limites environnementales particulières. Les limites supérieures/inférieures d'alarme peuvent être configurées de façon à activer un voyant DEL lorsque ces valeurs sont dépassées, de façon à ce que l'utilisateur s'aperçoive que les conditions de transport souhaitées n'ont pas été respectées.
Un nom de 16 caractères peut être attribué à chaque enregistreur de données. Ceci peut s'avérer utile dans des applications qui se servent de multiples enregistreurs de données, et lorsqu'il faut pouvoir les distinguer (en fonction de leur emplacement par exemple).
L'enregistreur de données inclut une application logicielle très simple à utiliser. L'application est utilisée pour la configuration de l'enregistreur, l'extraction des données de l'enregistreur, la visualisation des données sous forme de graphiques, l'analyse de tableurs de données et la sauvegarde de données dans un fichier (généralement en format CSV - fichier de valeurs séparées par des virgules) pour des applications de parties tierces comme Microsoft Excel.
L'interface utilisateur graphique est entièrement intuitive pour la configuration de nouveaux dispositifs et l'extraction de données. Lorsque l'utilisateur a de multiples dispositifs nécessitant la même installation, il est possible de télécharger le fichier de configuration pré-sauvegardé dans l'application afin d'accélérer le processus et de veiller à ce que les enregistreurs soient configurés de la même manière. L'application n'a besoin d'aucune installation de pilotes pour se connecter à l'enregistreur de données. Il suffit d'installer le logiciel, de le lancer puis de connecter l'enregistreur de données.
SPÉCIFICATIONS
Température
Plage : de -30 à 80°C (de -22 à 176°F)
Résolution : 0,01°C
Précision : ±0,3°C de 5 à 60°C (de 41 à 140°F), ±2,0°C sur la plage complète
Humidité (OM-92 uniquement)
Plage : de 0 à 100 % HR
Résolution : 0,01 % HR
Précision : ±3 % sur la plage de 20 à 80 % HR ; ±5 % HR sous 20 % HR ou au-dessus de 80 % HR
Mémoire
OM-91 : 65 520 mesures de température
OM-92 : 65 520 mesures de température et 65 520 mesures d'humidité
Modes démarrage : démarrage immédiat dès déconnexion du PC, démarrage différé (date/heure programmée) ou départ à bouton-poussoir
Mode d'enregistrement : Arrêt mémoire pleine ; lorsque l'enregistreur de données est démarré/arrêté par l'intervention de l'utilisateur à l'aide d'un bouton, le dernier emplacement de la mémoire est retenu
Intervalle d'enregistrement : 1 sec, 10 sec, 30 sec, 1 min, 10 min, 30 min, 1 h (peut être sélectionné par logiciel)
Compatibilité logicielle : Windows XP/Vista/7 et 8 (32-bit et 64-bit)
Enregistrement en temps réel : Affiche des données en temps réel une fois connecté à un PC
Horloge en temps réel : Heure automatiquement synchronisée par rapport au PC
Batterie de secours : Heure conservée lorsque l'appareil est arrêté
Précision : 0,50 sec/jour (~3 min/an)
Alarmes : Alarmes haut et bas pour la température et l'humidité ; voyant DEL d'alarme dédié
Voyants DEL : DEL d'alarme et état
ID dispositif : Un nom de 16 caractères peut être attribué à chaque enregistreur de données.
Connexions : Câble USB Micro-B à PC 90 cm (inclus)
Alimentation : Batterie CR2450 3V lithium incluse (à remplacer par l'utilisateur)
Durée de vie de la batterie : Durée de vie de batterie jusqu'à 4 ans pendant l'enregistrement de données
Mode Bypass : L'unité est alimentée à partir de l'USB une fois connectée pour préserver la batterie
Rated 1 out of
5
by
KTMcbroom from
Good product, crappy customer service
I bought two dataloggers that were supposed to measure temperature/humidity but when I got them it only measured temperature. The specs were misleading. I called to try and return the two to get the two I needed and was told there were no refunds. I didn't want a refund, just to get the product I thought was sold. It's really disappointing they wouldn't offer me a replacement, so I will be taking my business to another company that will benefit from the additional 7 dataloggers I need to purchase. You lost money by having poor customer service.
Date published: 2024-02-27
Rated 4 out of
5
by
Dennis688454 from
Small, easy to use dstalogger
Ok data logger, but not robust. It does the job and the software is quick and easy to use.
Date published: 2023-10-08
Rated 5 out of
5
by
Michaela from
Great track record as reliable and accurate.
Excited to use my new loggers! We've used these for many evaluations with success.
Date published: 2023-09-27
Rated 5 out of
5
by
Anonymous from
Portable Temperature and Humidity Data Loggers
Easy to set up and use. Software has good graphing output with Excel file export for further data analysis.
Date published: 2021-03-12
Rated 5 out of
5
by
Cantrol from
Very Good Data Logger
Pros: Small but accurate.
Software comes free with logger and very easy to use.
Cheap compared with competitor.
NIST certificate available.
Cons: Software does not work with multiple loggers.
Date published: 2020-07-13
Rated 1 out of
5
by
utvol from
disappointing
1. I was not able to download the software. The quick start guide had a web address for the software that you cannot go to. I had to request help in an email.
2. Now that I have the software, the software does not connect to the om-92. No blue square even though my computer shows the om-92 connected and the software is open. Why is that? No troubleshooting guide.
3. I go to replace the battery, which the quick start guide says is a CR2450, so I buy a CR2450. When I get home and take the cover off, the battery is a CR2032 inside. Why does your guide say CR 2450 when your instrument uses CR2032?
Date published: 2020-06-07
Rated 4 out of
5
by
Jackie from
Reliable products
Works great. Good quality products. We purchase from Omega all the time.
Date published: 2018-09-18
Rated 5 out of
5
by
ChemE Supervisor from
Easy to set up and use
The software is simple to use, and set up of the data logger is very easy. Compact device will suit my needs, and the USB will allow easy download of the temperature data.
Date published: 2018-03-22
Rated 5 out of
5
by
JCsGourmet15 from
Graph is awesome!
Have had it running 2 weeks. Tracks time & temp with a daily print-out!!!!Thanks
Date published: 2018-02-15
Rated 4 out of
5
by
Environmental from
Great little device
I really find this small device handy to monitor the temp and %RH in my environmental chambers. The only thing that i find strange is the real time termperature data is higher than the remote temperature. Maybe the ICs in the unit are heating up during real time operation? I'm still trying to figure this out. But aside from the realtime readings this unit is accurate and works perfectly for my setup! Great device for the price!! I haven't used the tech support but I might give them a try to assist me with the realtime readings.
Date published: 2017-12-31
Rated 5 out of
5
by
lyman from
Just what we needed
I bought this device to monitor the conditions in a museum. It works well since we can move it around to different locations. It is simple to use and the software is excellent, self-explanatory, and offers useful options.
Date published: 2017-09-09
Rated 5 out of
5
by
Ellie from
Easy to Use!
Bought 9 loggers from Omega. Super easy to use and works great! Have had no issues with them so far.
Date published: 2017-08-25
Rated 4 out of
5
by
Capn E Z from
Cute little bugger.
Does a nice job but does not have a display so you have no feel for the temp trends until you dump the data from the logger into your computer. Nice graphics and can dump into an excel file so you can manipulate the data six ways 'til Sunday. Overall it does what it was intended to do. But a display would be a nice addition.
Date published: 2017-08-19
Rated 5 out of
5
by
PWoK from
Great temp/humidity monitor
Had it over a year. Used initially to monitor a fridge while dry aging beef. I use vista and it will see the unit as long as the battery is good. Nice piece of mind to know that the temp of the fridge didn't change during my 60 day age. Used it a year later (needed a new battery so 4 years, yeah right...guess again) to compare the temp/humidity of the fridge with a pepsi cooler I got. The pepsi cooler is much more stable in temp/humidity. Aging beef, here we come again! Woo hoo! and I wont stink up the house this time!
Date published: 2017-07-02
Rated 5 out of
5
by
marioori from
Excellent
Excellent Excellent Excellent Excellent Excellent Excellent Excellent
Date published: 2016-07-29
- RoHS 2015/863 - Voir le certificat
- Approuvé CE
Who is Senonics Minnow?
Thank you for your question. Please e-mail your questions to DAS Engr-DAS@OMEGA.COM
Date published: 2020-07-25
Can I use the OM-92 inside of a walk-in mechanical convection oven, running at 60°C, anywhere from 2-4 months? It is an aging study oven, and we wish to capture humidity data that we can download after a 2-4 month cycle.
Thank you for your question. The application should be ok just note accuracy specs on data sheet.
Date published: 2020-08-08
What is the recommended NIST calibration interval for the OM-92?
Thank you for your question. There is none. Because it is not cost-effective for re-calibration so we recommend purchasing a new unit if you feel unit is out of calibration.
Date published: 2022-12-03
What are the CHECKSUM values of the various ZIPped files and why are they available from so many different locations, including unsecured FTP sites?
Thank you for your question. Please e-mail your questions to DAS Engr-DAS@OMEGA.COM
Date published: 2020-07-25
Good Afternoon, We would like to know if the Compact Portable USB Temperature and Humidity Data Loggers has internet access and if so, what kind of security protocol is in place? Thank you.
Thank you for your question. Unfortunately, the loggers do not have internet access.
Date published: 2022-06-14
Would this model be compatible in an environment with significant particulate concentrations?
Thank you for your question. The Om-92 logger as well as all of our Temp/Rh loggers would not work well in this environment.
Date published: 2020-11-20
After connecting OM-92, Windows prompt to automatic USB driver installation and then it says "device is ready to use". But the software does not detect and illuminate the connection icon and I cannot 'read' or 'configure' it. How can I make this work?
Please contact our DAS dept for support -1-800-872-9436 xt7775
Date published: 2023-09-27
Are these NIST recognized calibrated? Can they be calibrated on a routine basis?
Hello Kurt
Yes they can be NIST calibrated, the part number would be OM-92-NIST.
We do recommend them to be calibrated at least once a year, depending on usage.
Date published: 2020-04-06
After installing the software for OM-92 from Omega website trying to run I come up w/ MSVCP100.DLL "not found" !?!
Thank you for your question. We will require more information to help on this question, please email the DAS team at DAS@OMEGA.COM
Date published: 2023-09-05
Can these be used inside of HVAC Ductwork?
Thank you for your question. Yes, as long as it is in a non-condensing environment and free of any particles that can damage the sensor.
Date published: 2021-07-21
Is the OM-92 RoHS compliant?
The RoHS2 status of this part number has not yet been determined.
OMEGA is diligently working to determine the RoHS2 status of this product, but we are still waiting to receive information from our suppliers. The status of this product may change in the near future so please check back soon.
Thank you.
Date published: 2019-07-11
Is it possible to put OM-92 into an oven set at 60°C and at 145mbar for 30h?
Thank you for your question. We will require more information to help on this question, please email the DAS team at DAS@OMEGA.COM
Date published: 2023-02-21
- lead time? - How do we read the measurement on a automation plc (analog signal 0-10V or 0-20mA or 4-20mA etc...) or is it direct modbus serial or tcp connection or other? - How often does it need calibration? - what is the life span?
Hello Marcio
This device strictly works via USB on its own proprietary software, it does not have tcp or modbus capability.
Date published: 2019-09-25
The manual says the unit will shut down if the memory gets full but there's no indicator of remaining memory and no menu item in the program for clearing the stored data. How is this done?
Hello, thank you for your question. The memory is erased automatically every time you start a new logging session.
Date published: 2024-01-10
Would these be appropriate for use in a humid environment like a greenhouse?
It will have to be an environment with dry humidity, if the humidity is condensing or developing moisture it can cause issues with the internal sensor.
Date published: 2022-07-28