Appelez-nous au 1-888-826-6342
Retour au sommet
Charger plus d‘articles de cette famille (3) ...
Conditionneurs de signal à montage rail DIN
Configuration terminée.
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Échec de l'enregistrement des configurations, cliquez sur le bouton Configurer Recommencer
Ajouté à votre panier
TXDIN1600S strain gage/load cell transmitter accepts 0.2 to 7.5 mV/V inputs with 5V excitation. Universal current, bipolar voltage output. Remote tare, front panel config.
| Numéro de produit | Input Type | Input Class | Input Ranges | Output Type | Output Class | Supply Voltage Type | Isolation | Programability |
|---|---|---|---|---|---|---|---|---|
|
|
mV
|
Bridge, strain, mV
|
-38 to 38 mV dc
|
mA, V
|
Process
|
DC
|
500 V
|
Pushbutton/Software
|
The IDRN-IDRX Conditioners are TC, RTD, process, frequency, AC voltage input and provide analog or digital outputs. IDRN provides process out. IDRX provides RS-485 Output.
| Numéro de produit | Number of Inputs | Input Type | Input Ranges | Output Type | Other Features |
|---|---|---|---|---|---|
|
|
1
|
Frequency, Pulse
|
Not Applicable
|
2-wire RS-485
|
IDRN-FP
|
|
|
1
|
Process
|
400 mV to 10 Vdc 0 to 20 mA
|
2-wire RS-485
|
IDRN-PR
|
|
|
2
|
Frequency, Pulse
|
Not Applicable
|
0 to 10V @ 10 mA max 0 to 20 mA or 4 to 20 mA, 10V compliance
|
IDRX-FP
|
|
|
1
|
Process
|
400 mV to 10 Vdc 0 to 20 mA
|
0 to 10V @ 10 mA max 0 to 20 mA or 4 to 20 mA, 10V compliance
|
IDRX-PR
|
|
|
2
|
Strain Gage, Bridge Transducer-Signal
|
0 to 30 mV 0 to 100 mV±100 mV
|
0 to 10V @ 10 mA max 0 to 20 mA or 4 to 20 mA, 10V compliance
|
IDRX-ST
|
The DRC-4710 and 4720 are DIN Rail bridge input signal conditioners that accept bridge (strain gage, load cell, or voltage) inputs and have 0-10Vdc or 4-20mA outputs.
| Numéro de produit | Input Type | Input Class | Input Ranges | Output Type | Output Class | Supply Voltage Type | Isolation | Programability |
|---|---|---|---|---|---|---|---|---|
|
|
mV
|
Bridge, strain, mV
|
0 to 30 mV dc
|
V
|
Process
|
DC
|
None
|
Switch
|
|
|
mV
|
Bridge, strain, mV
|
0 to 30 mV dc
|
mA
|
Process
|
DC
|
None
|
Switch
|
The DRST-BG is a load cell & strain gage amplifier that converts mV to current or voltage. Front panel programmable LED display | Calibration of input span, external taring.
| Numéro de produit | Input Type | Input Class | Input Ranges | Output Type | Output Class | Display Type | Supply Voltage Type | Isolation | Programability |
|---|---|---|---|---|---|---|---|---|---|
|
|
mV
|
Bridge, strain, mV
|
-40 to 100 mV dc
|
mA
|
Process
|
LED
|
DC
|
None
|
Pushbutton
|
The DRSL-U is a universal input conditioner that accepts thermocouple, RTD, resistance, potentiometer, voltage or current input. Configured w/ DRSL-DISPLAY programmer.
| Numéro de produit | Input Type | Input Class | Input Ranges | Output Type | Output Class | Supply Voltage Type | Isolation | Programmable | Additional Feature |
|---|---|---|---|---|---|---|---|---|---|
|
|
TC, RTD, Resistance, Pot, mA, V
|
Universal
|
See Detail Specs
|
mA, V
|
Process
|
DC
|
300 V
|
Requires DRSL-DISPLAY and DRSL-ADAPTOR
|
Universal
|
|
|
Not Applicable
|
Not Applicable
|
Not Applicable
|
Not Applicable
|
Not Applicable
|
None
|
None
|
Requires DRSL-DISPLAY and DRSL-ADAPTOR
|
Docking Station for Programming DRSL-U
|
The DRST-AC measures AC current or voltage signals and outputs passive or active current signals. UL and c-UL approved. Universal power. Programmer required.
| Numéro de produit | Input Type | Input Class | Input Ranges | Output Type | Output Class | Display Type | Supply Voltage Type | Isolation | Programability |
|---|---|---|---|---|---|---|---|---|---|
|
|
AC Current/Voltage
|
AC Current/Voltage
|
0 to 5 A, 0 to 300 Vac
|
mA, V
|
Process
|
Programmer
|
AC/DC
|
2300 V
|
Display Programmer
|
The DRG-SC Series Conditioners have models with TC, RTD, Pot, Freq., AC/DC Voltage/Current, Strain/Bridge inputs and field configurable outputs from 0-5V, 0-10V, 0-20mA.
| Numéro de produit | Number of Inputs | Input Type | Number of Output | Output Type | Form Factor | Accuracy Rating |
|---|---|---|---|---|---|---|
|
|
1
|
DC Voltage and Current (bipolar)
|
1
|
0 to 5V, 0 to 10V, 0 to 1 mA, 0 to 20 mA, 4 to 20 mA, +-5V, +-10 V
|
Din Rail
|
Good
|
The DRSL-SP1 is a repeater/splitter that isolates and converts 1 current input to 2 current outputs. Slim housing, high accuracy (0.05%), no setup needed.
| Numéro de produit | Input Type | Input Class | Input Ranges | Output Type | Output Class | Supply Voltage Type | Isolation | Programability | Additional Feature |
|---|---|---|---|---|---|---|---|---|---|
|
|
mA
|
Process
|
0 to 20 mA
|
mA (x2)
|
Splitter
|
DC
|
300 V
|
None
|
Repeater/Splitter
|
The DRG-AR Series Conditioners are TC, RTC, DC or AC voltage and current input with 2 SPDT Relay Outputs. Field configurable ranges with adjustable setpoints.
| Numéro de produit | Input Type | Input Ranges | Output Type | Supply Voltage Type | Additional Feature |
|---|---|---|---|---|---|
|
|
AC Current/Voltage
|
100 mV to 200 V, 10 mA to 100 mA
|
2 Relays
|
DC
|
Field Configurable
|
|
|
RTD
|
(-200) to 850 °C
|
2 Relays
|
DC
|
Field Configurable
|
The DRC-8900 Series Conditioners are available with TC, RTD, or mA inputs and Voltage outputs. Inputs and outputs are isolated and linearized. 24Vdc power w/ slim housing.
| Numéro de produit | Input Type | Input Class | Input Ranges | Output Type | Output Class | Supply Voltage Type | Isolation | Programability |
|---|---|---|---|---|---|---|---|---|
|
|
mA
|
Process
|
4 to 20 mA
|
V
|
Process
|
DC
|
700 V
|
Trim Pot
|
|
|
TC (J)
|
Temperature
|
0 to 500°C
|
V
|
Process
|
DC
|
700 V
|
Trim Pot
|
|
|
RTD
|
Temperature
|
100 Ohm
|
V
|
Process
|
DC
|
700 V
|
Trim Pot
|
The DRSL-DC4 Signal Conditioners convert bipolar process voltage and current signals to unipolar signals. DIP switch selectable range, slim housing, high accuracy (0.05%).
| Numéro de produit | Input Type | Input Class | Input Ranges | Output Type | Output Class | Supply Voltage Type | Isolation | Programability | Additional Feature |
|---|---|---|---|---|---|---|---|---|---|
|
|
mA, V
|
Process
|
±20 mA, ±10Vdc
|
mA, V
|
Process
|
DC
|
300 V
|
Switch
|
0.05% Accuracy of Span
|
DRA-ACT-S Series DIN Rail Conditioners are self powered AC Current/Voltage input and convert to either 0-1mA or 0-20mA output. Self powered design.
| Numéro de produit | Number of Inputs | Input Type | Input Ranges | Number of Output | Output Type | Response Time/Frequency | Form Factor | Accuracy Rating | Supply Voltage Type | Supply Voltage | Other Features |
|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
1
|
AC Current
|
0 to 1 Aac
|
1
|
0 to 20 mA
|
40 to 400 Hz
|
Din Rail
|
Better
|
Self-Powered
|
Not Applicable
|
Not Applicable
|
|
|
AC Voltage
|
0 to 300 Vac
|
mA
|
Loop
|
4000 V
|
Trim Pot
|
|||||
|
|
AC Voltage
|
AC Voltage
|
0 to 150 Vac
|
mA
|
Process
|
Loop
|
4000 V
|
Trim Pot
|
|||
|
|
AC Voltage
|
AC Voltage
|
0 to 300 Vac
|
mA
|
Process
|
Loop
|
4000 V
|
Trim Pot
|
|||
The DRSL-LPO Series Conditioners are 1 or 2 channel output loop powered 2 wire isolators. 1:1 signal ratio, low voltage drop, slim housing. 0.05% accuracy.
| Numéro de produit | Input Type | Input Class | Input Ranges | Output Type | Output Class | Supply Voltage Type | Isolation | Programability | Additional Feature |
|---|---|---|---|---|---|---|---|---|---|
|
|
mA
|
Process
|
4 to 20 mA
|
mA
|
Process
|
DC
|
300 V
|
Switch
|
1-Channel
|
|
|
mA
|
Process
|
4 to 20 mA
|
mA
|
Process
|
DC
|
300 V
|
Switch
|
2-Channel
|
TXDIN1600 series has a universal thermocouple, RTD, or process input and 4-20mA output. Configuration via USB cable (sold separately). Push button user trim, relay output
| Numéro de produit | Input Type | Input Class | Input Ranges | Output Type | Output Class | Supply Voltage Type | Isolation | Programability |
|---|---|---|---|---|---|---|---|---|
|
|
TC, RTD, mA, mV
|
Universal
|
See Detail Specs
|
V
|
Process
|
DC
|
500 V
|
Pushbutton/Software
|
|
|
TC, RTD, mA, mV
|
Universal
|
See Detail Specs
|
2 Relays
|
Relay
|
DC
|
500 V
|
Pushbutton/Software
|
TXDIN400 series transmitters accept thermocouple or RTD input (TX401) or process voltage, current, or resistance (TX402). Configurable via RFID with TX400-RFID accessory.
| Numéro de produit | Input Type | Input Class | Input Ranges | Output Type | Output Class | Supply Voltage Type | Isolation | Programability |
|---|---|---|---|---|---|---|---|---|
|
|
TC, RTD, mV
|
Temperature
|
See Detail Specs
|
mA
|
Process
|
Loop
|
1000 V
|
RFID Programmer
|
|
|
Resistance, mA, mV
|
Process
|
0 to 4K Ohm, 0 to 20 mA, 0 to 10 Vdc
|
mA
|
Process
|
Loop
|
1000 V
|
RFID Programmer
|
The DRSL-DC1-DC2 Conditioners have a DC current and voltage input and isolated and converted DC current and voltage output. DIP switch selectable range. 0.2% accuracy
| Numéro de produit | Input Type | Input Class | Input Ranges | Output Type | Output Class | Supply Voltage Type | Isolation | Programability | Additional Feature |
|---|---|---|---|---|---|---|---|---|---|
|
|
mA, V
|
Process
|
0 to 20 mA, 0 to 10 Vdc
|
mA, V
|
Process
|
DC
|
300 V
|
Switch
|
0.2% Accuracy of Span
|
The DRSL-DISPLAY Programmer is required to program DRST-AC, DRST-DC, DRST-UN, DRST-UR, DRSL-U devices. Snaps onto the front panel with transferable configurations.
| Numéro de produit | Input Type | Input Ranges |
|---|---|---|
|
|
Not Applicable
|
Not Applicable
|
The DRSL-RTD-LP is a 2, 3, or 4-wire PT100 RTD input conditioner. Output loop powered with high accuracy and slim housing. Pre-calibrated temp range DIP switch selected.
| Numéro de produit | Input Type | Input Class | Input Ranges | Output Type | Output Class | Supply Voltage Type | Isolation | Programability |
|---|---|---|---|---|---|---|---|---|
|
|
RTD
|
Temperature
|
-200 to 850°C
|
mA
|
Process
|
Loop
|
None
|
Switch
|
DIN-100 Conditioners convert analog signals to RS-485 to a PC or other processor based equipment. Input types are temperature, bridge, V or mA, D I/O. NV memory storage.
| Numéro de produit | Input Type | Input Ranges | Output Type | Additional Feature | |
|---|---|---|---|---|---|
|
|
Voltage
|
+5V
|
Rs 485
|
Not Applicable
|
|
|
|
1
|
Voltage
|
+100 V
|
RS-485
|
Din Rail
|
|
|
1
|
Bridge
|
+30 mV 10V excitation
|
RS-485
|
|
|
|
1
|
Bridge
|
+100 mV 10V excitation
|
RS-485
|
|
The DRSL-SP3 is a repeater/splitter that isolates and converts 1 bipolar process input to 2 process outputs. DIP switch selectable ranges, slim housing, high accuracy.
| Numéro de produit | Input Type | Input Class | Input Ranges | Output Type | Output Class | Supply Voltage Type | Isolation | Programability | Additional Feature |
|---|---|---|---|---|---|---|---|---|---|
|
|
mA, V
|
Process
|
±20 mA, ±10Vdc
|
mA, V (x2)
|
Splitter
|
DC
|
300 V
|
Switch
|
Bipolar Splitter
|
Conditionneurs de signal à montage rail DIN
DIN Rail Signal Conditioners are essential for accurate data recording in a wide range of indus...
[+]