Appelez-nous au 1-888-826-6342
Insertion Paddlewheel Flow Sensors
Adjustable Depth Insertion Paddlewheel Flow Sensors
Ajouté à votre panier
Configuration terminée.
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Échec de l'enregistrement des configurations, cliquez sur le bouton Configurer Recommencer
- Available in 316 Stainless Steel or Brass
- Installs in a Wide Range of Pipe Sizes From 3' to 40'
- Excellent Low-Flow Performance
- Special Fittings Not Required
FP6501 Options de modèles
Voir tous les modèlesModifiez ces spécifications pour commander un modèle différente. Toutes les combinaisons ne sont pas valides. Les options compatibles avec les sélections précédentes seront en gras.
*Les options en surbrillance ne sont pas compatibles. Veuillez sélectionner une combinaison différente.
Wetted Materials
Compatible Fittings
Pipe Size Range
Category
Velocity Range
Accuracy
Max Process Temperature
Max Operating Pressure
Output Signal
Supply Power
Display
Ruby bearings and a non-drag pick-off give these adjustable insertion flow sensors the widest flow range of any of the paddlewheel types. A Hall-effect device detects the passage of miniature magnets in the six rotor blades. The resulting square-wave signal can be sent hundreds of feet without a transmitter, over unshield cable. This signal can be connected directly to many PLCs and other controls without additional electronics.
A depth adjustment system allows two basic sizes to cover pipe sizes from 7.62 to 102 cm (3 to 40").
SPECIFICATIONS
Materials
Probe Body: Brass or 316 SS
Rotor: PVDF
Shaft: Nickel-bound Tungsten Carbide standard, ceramic optional
Bearings: FP6501/FP6502: Ruby ring, ruby end stone, set in PVDF bearing holder
FP6511/FP6512: Bronze Ball Valves standard, 316SS optional
Power: 5 to 24 Vdc, 1.5 mA
Signal: Square wave, 11 Hz/fps (approx.), current sinking output, 20 mA maximum, NPN (Hall Effect)
Cable: #22 AWG 3-conductor, 6 m (18') standard; 650 m (2000') max
Accuracy: ±1.5% of full range
Range: 0.3 to 30 fps
Maximum Working Pressure: 14 bar (200 psi) at 24°C (75°F)
Maximum Temperature: 93°C (200°F) at 0 psig
Shipping Weight:
FP6501: 1.8 kg (4 lb)
FP6502: 2.3 kg (5 lb)
FP6511: 5.9 kg (13 lb)
FP6512: 6.8 kg (15 lb)
Pipe Size Range:
FP6501/FP6511: 7.62 to 31 cm (3 to 12")
FP6502/FP6512: 31 to 102 cm (12 to 40")
Fitting Size:
FP6501/6502: 1½ MNPT
FP6511/6512: 2 MNPT
A depth adjustment system allows two basic sizes to cover pipe sizes from 7.62 to 102 cm (3 to 40").
Compatible Meters:
- DPF700
- DPF70
- DPF11
- FC-21, 22
SPECIFICATIONS
Materials
Probe Body: Brass or 316 SS
Rotor: PVDF
Shaft: Nickel-bound Tungsten Carbide standard, ceramic optional
Bearings: FP6501/FP6502: Ruby ring, ruby end stone, set in PVDF bearing holder
FP6511/FP6512: Bronze Ball Valves standard, 316SS optional
Power: 5 to 24 Vdc, 1.5 mA
Signal: Square wave, 11 Hz/fps (approx.), current sinking output, 20 mA maximum, NPN (Hall Effect)
Cable: #22 AWG 3-conductor, 6 m (18') standard; 650 m (2000') max
Accuracy: ±1.5% of full range
Range: 0.3 to 30 fps
Maximum Working Pressure: 14 bar (200 psi) at 24°C (75°F)
Maximum Temperature: 93°C (200°F) at 0 psig
Shipping Weight:
FP6501: 1.8 kg (4 lb)
FP6502: 2.3 kg (5 lb)
FP6511: 5.9 kg (13 lb)
FP6512: 6.8 kg (15 lb)
Pipe Size Range:
FP6501/FP6511: 7.62 to 31 cm (3 to 12")
FP6502/FP6512: 31 to 102 cm (12 to 40")
Fitting Size:
FP6501/6502: 1½ MNPT
FP6511/6512: 2 MNPT
RoHS 2015/863 - Voir le certificat
Approuvé CE
Accessories