PST rejoint DwyerOmega. En savoir plus>
Paddlewheel Flow & Temperature Meter
Paddlewheel Flow & Temperature Sensor/Transmitter
Ajouté à votre panier
Configuration terminée.
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Échec de l'enregistrement des configurations, cliquez sur le bouton Configurer Recommencer
- Mesure simultanée du débit et de la température
- Précision en débit : ±2% de pleine échelle
- Sortie configurable 4-20mA ou 1-5Vcc
- Boîtier du transmetteur protégé IP65/NEMA-4
SYS/FP7002A/FP7010-GI Options de modèles
Voir tous les modèlesModifiez ces spécifications pour commander un modèle différente. Toutes les combinaisons ne sont pas valides. Les options compatibles avec les sélections précédentes seront en gras.
*Les options en surbrillance ne sont pas compatibles. Veuillez sélectionner une combinaison différente.
Flow Range
Wetted Materials
Compatible Fittings
Pipe Size Range
Process Connection Type
Process Connection Size
Category
Accuracy
Max Process Temperature
Max Operating Pressure
Output Signal
Supply Power
Display
Features
The FP7002 Series Paddlewheel Flow sensor/transmitter flow system provides a low cost, factory
calibrated, simple, and easy to install solution for applications requiring a remote long distance flow
and temperature sensor located away from the main indicating meter or controlinstrumentation. When
ordered with an FP7000 series installation fitting, the sensor/transmitter is factory calibrated to match the
flow rate of the fitting selected. Example: if you ordered an FP7002 sensor/transmitter with an FP7010
PVC fitting, the analog output of the transmitter will be factory calibrated to give 20 mA output at the
max flow rate of 50 GPM and 4 mA out at 0 GPM. The analog output can be converted to 1 to 5 Vdc output
in the field without recalibrating the system. Also now included into the FP7002 design at no extra
charge is an independent temperature sensor/transmitter with an industry standard 2-wire, 4 to 20 mA
loop output scaled over a 0 to 100°C temperature range.
SPECIFICATIONS
Paddlewheel Output
Accuracy: ±2% FS
Repeatability: ±1% FS
Power: 12 to 18 Vdc @ 50 mA max
Output: 3-wire, 4 to 20 mA (1 to 5 Vdc with external 250 Ω resistor)
Max Loop Resistance: &Omega = (Vsupply–12 V)/0.02 A
Wetted Materials:
Sensor Body: Polypropylene
O-Ring: FKM
Paddle: PVDF
Locking Nut:
FP7002: PVC
FP7002A: Brass
Fluid Temperature/Pressure Range: Do not exceed maximum ratings of the piping. Depending on the
material of the fitting, the operating temperature/pressure may be limited by the piping and not by
the sensor. For all PVC tee fittings, do not exceed 150 psig @ 27°C (80°F), 100 psig @ 38°C
(100°F), 60 psig @ 49°C (120°F) or 30 psig @ 60°C (140°F), owing to the insert in
the tee. FP7000 sensor: 0 to 26°C (32 to 80°F) up to 150 psig; max pressure decreases 1.1 psig
per each 0.56°C (1°F) above 27°C (80°F) for a max temperature of 93°C (200°F)
at 18 psig max
Weight:
FP7002: 0.3 kg (0.75 lb)
FP7002A: 0.4 kg (1 lb)
Max Viscosity: 5 cps
Temperature Output
Temperature Range: 0 to 100°C (32 to 212°F)
Accuracy: ±1.7°C (3.1°F)
Power: 12 to 18 Vdc @ 30 mA
Output: 2-wire, 4 to 20 mA (1 to 5 Vdc with external 250 Ω resistor)
Max Loop Resistance: Ω = (Vsupply – 12 V)/0.02 A
How do I convert to 1-5 VDC output? I do not see anything in the manual
Thank you for your inquiry about the paddle wheel sensor. You will need to install a 250 Ohm resistor to convert to a 1 to 5 Voltage output.
Date published: 2023-02-17
Accessories