PST rejoint DwyerOmega. En savoir plus>
316 SS Turbine Flow Meters w/ Pulse Output & NIST Cal Cert.
Liquid Turbine Flowmeters
Ajouté à votre panier
Configuration terminée.
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Échec de l'enregistrement des configurations, cliquez sur le bouton Configurer Recommencer
- Cost-Effective Solution for Turbine Flow Meter Applications
- Rugged 316 Stainless Steel Construction Offers Long Service Life in Severe Operating Environments
- Available with NPT or BSP Threads
- Accurate and Repeatable Flow Measurement
FTB-1424 Options de modèles
Voir tous les modèlesModifiez ces spécifications pour commander un modèle différente. Toutes les combinaisons ne sont pas valides. Les options compatibles avec les sélections précédentes seront en gras.
*Les options en surbrillance ne sont pas compatibles. Veuillez sélectionner une combinaison différente.
Flow Range
Output Signal
Max Process Temperature
Process Connection Size
Category
Media Type
Accuracy
Max Operating Pressure
Wetted Materials
Process Connection Type
Display
The FTB-1400 turbine flow meter is designed to meet the demands of the most rigorous flow measurement applications. Originally developed for the secondary oil recovery market, the FTB-1400 is an ideal meter for liquid flow measurement on or off the oilfield. The meter features a 316 stainless steel housing and rotor support, CD4MCU stainless steel rotor, and abrasion-resistant tungsten carbide rotor shaft and journal bearings. These materials help the meter to maintain accuracy and mechanical integrity when measuring the corrosive and abrasive fluids found in many industries.
Fluid entering the meter first passes through an inlet flow straightener that reduces its turbulent flow pattern. Fluid then passes through the turbine, causing the turbine to rotate at a speed proportional to fluid velocity. As each turbine blade passes through the magnetic field generated by the meter's magnetic pick-up, an AC voltage pulse is generated. These pulses provide an output frequency that is proportional to volumetric flow.
SPECIFICATIONS
Materials of Construction
Body: 316 stainless steel
Rotor: CD4MCU stainless steel
Rotor Support: 316 stainless steel
Rotor Shaft: Tungsten carbide
Turndown Ratio: 10:1
Flow Accuracy: ±1% of reading for 1" and larger meters
±1% of reading over the upper 70% of the measuring range for 1/2" meters Repeatability: ±0.1%
Calibration: Water (5-Point NIST traceable calibration)
Pressure Rating: 5000 psi (maximum)
Turbine Temperature: -101 to 177°C (50 to 350°F); -101 to 232°C (-150 to 450°F) with "–HT" option
End Connections: NPT; BSP optional
CABLE WITH CONNECTOR IS REQUIRED.
Fluid entering the meter first passes through an inlet flow straightener that reduces its turbulent flow pattern. Fluid then passes through the turbine, causing the turbine to rotate at a speed proportional to fluid velocity. As each turbine blade passes through the magnetic field generated by the meter's magnetic pick-up, an AC voltage pulse is generated. These pulses provide an output frequency that is proportional to volumetric flow.
SPECIFICATIONS
Materials of Construction
Body: 316 stainless steel
Rotor: CD4MCU stainless steel
Rotor Support: 316 stainless steel
Rotor Shaft: Tungsten carbide
Turndown Ratio: 10:1
Flow Accuracy: ±1% of reading for 1" and larger meters
±1% of reading over the upper 70% of the measuring range for 1/2" meters Repeatability: ±0.1%
Calibration: Water (5-Point NIST traceable calibration)
Pressure Rating: 5000 psi (maximum)
Turbine Temperature: -101 to 177°C (50 to 350°F); -101 to 232°C (-150 to 450°F) with "–HT" option
End Connections: NPT; BSP optional
CABLE WITH CONNECTOR IS REQUIRED.
| Model No. | Connection | K-factor Pulse/Gal | Range | Lay Length mm (in) | ||
|---|---|---|---|---|---|---|
| LPM | GPM | Barrels/Day | ||||
| FTB-1411 | ½ NPT | 18,000 | 2.3 to 11.3 | 0.6 to 3 | 20 to 100 | 76 (3) |
| FTB-1412 | ½ NPT | 13,000 | 2.8 to 28 | 0.75 to 7.5 | 25 to 250 | 76 (3) |
| FTB-1413 | ½ NPT | 3,300 | 7.6 to 56.7 | 2 to 15 | 68 to 515 | 76 (3) |
| FTB-1421 | 1 NPT | 18,000 | 2.3 to 11.3 | 0.6 to 3 | 20 to 100 | 76 (3) |
| FTB-1422 | 1 NPT | 13,000 | 2.8 to 28 | 0.75 to 7.5 | 25 to 250 | 76 (3) |
| FTB-1423 | 1 NPT | 3,300 | 7.6 to 56.7 | 2 to 15 | 68 to 515 | 76 (3) |
| FTB-1424 | 1 NPT | 3,100 | 11.3 to 113 | 3 to 30 | 100 to 1000 | 101 (4) |
| FTB-1425 | 1 NPT | 870 | 18.9 to 189 | 5 to 50 | 170 to 1700 | 101 (4) |
| FTB-1431 | 1½ NPT | 330 | 56.8 to 681 | 15 to 180 | 515 to 6000 | 152 (6) |
| FTB-1441 | 2 NPT | 330 | 56.8 to 681 | 15 to 180 | 515 to 6000 | 152 (6) |
Rated 5 out of
5
by
Roger from
Beautifully engineered and manufactured
I purchased the sensor and digital display for data acquisition in an industrial cooling system to facilitate design and implementation of a new and improved cooling system for composites molding.
Date published: 2017-08-01
what is the viscosity range?
Thank you for your inquiry on the turbine flow meter. Ideally used for water at 1 cP and the max is approximately, 5 cP. If viscosity is greater, it is recommended using a positive displacement flow meter.
Date published: 2022-08-26
Could this be used with liquid candle wax? (85c)
Thank you for your inquiry. Unfortunately, the turbine flow meter mentioned will not be recommended for viscous liquids. It would be best to use a positive displacement flow meter that can handle viscous liquids in general such as the FPD3000, FPD3100, and FPD3200 series.
Date published: 2024-09-04
Accessories
3m (10') Cable assembly with 2 pin straight connector & stripped leads
C$145.61
8 In Stock
Repair Kits