Appelez-nous au 1-888-826-6342
Low Cost Brass Body Turbine Flow Meters
Turbine Flow Meter, 0.5 to 2.11 GPM, Brass, 3/8" NPT, 3 Pin Mini DIN
Ajouté à votre panier
Configuration terminée.
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Échec de l'enregistrement des configurations, cliquez sur le bouton Configurer Recommencer
- Compact size
- Measurement in any meter orientation
- Operating pressure up to 362.50 psi (25 bar)
- Temperature range of –4…212° F (–20…100° C)
BV2000BRN080A Options de modèles
Voir tous les modèlesModifiez ces spécifications pour commander un modèle différente. Toutes les combinaisons ne sont pas valides. Les options compatibles avec les sélections précédentes seront en gras.
*Les options en surbrillance ne sont pas compatibles. Veuillez sélectionner une combinaison différente.
Flow Range
Process Connection Type
Features
Media Type
Accuracy
Output Signal
Max Operating Pressure
Max Process Temperature
Wetted Materials
Process Connection Size
MEASURING PRINCIPLE
The rotor is turned by the liquid force proportional to flow. A Hall effect sensor supplies pulses that can be used for digital or analog signal processing. The generated pulses are specified as a K-factor.
OPERATING PRINCIPLE
Liquid flow causes a bladed turbine inside the meter housing to turn at an angular velocity directly proportional to the velocity of the liquid measured. As the blades pass beneath a magnetic pickup coil, a frequency signal is generated.
Each pulse is equivalent to a discrete volume of liquid. The frequency pulse is directly proportional to the turbine angular velocity and the flow rate.
The large number of pulses provides high resolution. As the mass of the turbine is small, the response time is fast. It is not necessary to install a straight length of pipeline upstream of the meter. The simple mechanical construction of the Vision meter provides a long lifespan without any loss of accuracy. Pressure spikes less than the burst pressure rating do not affect the measurements.
- RoHS 2015/863 - Voir le certificat
- Approuvé CE
What is the PPL or PPG on the BV2000BRN080A? The tech sheet seems to omit this model
Thank you for your inquiry. The K-factor will be listed in the manual when you go to the Manuals & Downloads Tab, it will be listed on the chart under the BV2000 series.
Date published: 2023-08-25
What is the flow resistance of the BV2000BRN080A? What is the maximum pressure drop at full flow?
Thank you for your inquiry. The pressure drop for the turbine flow meter at max flow is 10.2 PSI
Date published: 2024-06-13