Appelez-nous au 1-888-826-6342
Biaxial, Stacked 0/90° Corner T Rosette Strain Gauges
2 mm Grid Length, 1.1 mm Grid Width 350 Ω Resistance, ST STC Number
Remises de volume disponibles
Calendrier de remise sur volume
| Quantité | Prix unitaire |
|---|---|
| 1-4 | C$330.75 |
| 5-9 | C$314.21 |
| 10-24 | C$307.60 |
| 25-49 | C$294.37 |
| 50-99 | C$287.75 |
| 100+ | C$281.14 |
Ajouté à votre panier
Configuration terminée.
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Échec de l'enregistrement des configurations, cliquez sur le bouton Configurer Recommencer
- Conveniently Priced per Pack of 5
- X-Y Pattern for Axial Strain
- Very Flexible, Mechanically Strong
- Small Bending Radius
SGD-7/350-XY41 Options de modèles
Voir tous les modèlesModifiez ces spécifications pour commander un modèle différente. Toutes les combinaisons ne sont pas valides. Les options compatibles avec les sélections précédentes seront en gras.
*Les options en surbrillance ne sont pas compatibles. Veuillez sélectionner une combinaison différente.
Grid Length Range
Grid Length
Grid Width
Connection Type
Resistance
STC number
Grid Style
Temperature Range Units
Temperature Range Min
Temperature Range Max
Maximum Strain
Features
Grid Style – Corner T Rosettes
Temperature Range Units - C°
Temperature Range Min - -75
Temperature Range Max – 200
Resistance - 120Ω
Biaxial, Stacked 0/90° Corner T Rosette Strain Gauges
Biaxial, Stacked 0/90° Corner T Rosette Strain Gauges are specialized sensors designed to provide precise measurements of strain in two directions – normal (tensile or compressive) and shear. These are valuable tools used extensively in industrial applications to measure strain in structural components and materials under stress. Engineers rely on these devices to optimize component design by providing data on how materials perform under load and ensure quality control by verifying the integrity of materials and components.
Rated 4 out of
5
by
Calc from
Reduced Expectations
The previous strain gages that I purchased shipped with ALL technical data (coefficients and compensation curves) and had ribbon leads that were about 36 inches long. This set minimal technical data (no temperature compensation coefficients) and had ribbon leads about 2 inches long, barely enough to attach extension wire for measurement purposes. The product size and function was correct and consistent with the advertised parameters. Shipping time took 4 business days before leaving Omega, this hindered expected arrival of parts for project progress.
Date published: 2016-06-23
