Appelez-nous au 1-888-826-6342
Indicateur haute performance à haute résolution à 6 chiffres pour jauges de contraite/cellules de charge
High Performance Strain gauge Meter, High Resolution 6-Digit Display
Remises de volume disponibles
Calendrier de remise sur volume
Quantité | Prix unitaire |
---|---|
1-4 | C$1 262.82 |
5-9 | C$1 199.68 |
10-24 | C$1 136.54 |
25-49 | C$1 073.40 |
50-99 | C$1 010.26 |
100+ | C$947.12 |
Ajouté à votre panier
Configuration terminée.
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Échec de l'enregistrement des configurations, cliquez sur le bouton Configurer Recommencer
- Compatible with Strain Gage Bridge Sensors or Ratiometric Voltage Sensors
- Adjustable Filtering Up to 13 Hz
- Displays Up to 999,999 Counts
- NEMA-4 Front Panel
DP41-S Options de modèles
Voir tous les modèlesModifiez ces spécifications pour commander un modèle différente. Toutes les combinaisons ne sont pas valides. Les options compatibles avec les sélections précédentes seront en gras.
*Les options en surbrillance ne sont pas compatibles. Veuillez sélectionner une combinaison différente.
Alarm Output
Retransmission Output
Communications
Supply Voltage Type
Additional Features
Measurement Type
Input Type
Number of Inputs
Form Factor
Display Type
Max Sampling Rate
The OMEGA ® DP41-S indicators offer exceptional performance in a strain gage meter. The DP41-S has standard built-in excitation. The input range is selected via internal jumpers, and scaling to engineering units is performed using the front keypad. The DP41-S accepts strain gage bridge sensors and ratiometric voltage measurements. Programming the DP41-S is accomplished through the five front panel keypads. If the optional RS-232 or RS-485 communications are installed, the operator can remotely set all display parameters.
Examples of pricing for popular models is referenced in the "To Order" box. Use the "Part Number Builder" below to get pricing for all available models.
Examples of pricing for popular models is referenced in the "To Order" box. Use the "Part Number Builder" below to get pricing for all available models.
Rated 1 out of
5
by
17025 from
Save your money
1) No zero or Tate button. This is a basic function of nearly every instrument of this type.
2) No auto zero tracking. Again, a basic function found on every competitors equipment.
3) The scaling function simply does not work. Specifically, scaling with a known load will adjust span values while not changing zero. If your transducer has an output at no load (such as the case for any dead load), the only option is to put in an offset, which also changes span values.
When one of these shows up in our calibration lab, we push the customer to buy something else. These are an absolute joke.
Date published: 2022-01-13
Rated 3 out of
5
by
Adis from
Title
Not easy to use. some setups and wiring needs to be done before.
Date published: 2021-03-31
Rated 5 out of
5
by
madmagyar from
Long time OMEGA customer
Never been let down yet by any of their products, I have been purchasing from OMEGA for 20 plus years
Date published: 2017-05-02
- RoHS 2015/863 - Voir le certificat
- Approuvé CE
- UKCA
- Listé UL cULus
Is the DP41-S compliant with IEC 61000 EMC requirements? If not, what EMC compliance is available for this device?
The DP41-S is IEC Compliant. You can request a copy of the certificate by emailing the request to pressure@omega.com
Date published: 2022-12-30
Does the equipment require PM?
If the use of PM in your question refers to Phase Modulation the answer would be no. The DP41-S is simply a 115VAC powered scalable digital display. It accepts DC signals to the millivolt, Voltage or milliamp range.
Date published: 2019-08-05
I want to measure the strain of one single strain gauge (quarter bridge) at site. I don't need data acquisition; just simple getting the strain value from display. Can I do it with DP41-S?
Hello, thank you for contacting Omega engineering. You will not be able to a single strain gauge with just the DP41-S. You will need a BCM-1 bridge completing module and the DP41-S meter. This is assuming that you have extension wires. For an in depth explanation please email pressure@omega.com
Date published: 2020-10-21
DP41 Software cannot be installed on WINDOWERS11 please help
We are checking on compatibility of the DP41 software with Windows 11. Will respond directly to your indicated email address with answer.
Date published: 2022-08-04
DP41 software cannot Install WINDOWS 11 Please gave me software I am very urgent I've been waiting for two weeks
The software for DP41 is very old. It is not compatible with Windows 11. Newest system it probably compatible with is Windows XP. We do not currently have any alternative software that we can offer for the DP41-S
Date published: 2022-08-22
I need to know if the DP41-S-AR4 controller can measure 4-20 mAh current as input signal or just strain gauges? Watch for your comments.
Thank you for your inquire
Yes the unit can take milli volt, VDC & 4/20 MA
Date published: 2022-03-30
Can we buy JUST the mounting bracket for a # DP41-S-07 meter? We have lost ours which originally came with the unit.
Thank you for your inquiry. Unfortunately a replacement mounting sleeve (bracket) is not available for the DP41 Series
Date published: 2020-12-01
would this device be able to read force in pounds. Would it be compatible to an ENERPAC set which includes an electric hydraulic pump and a hollow plunger hydraulic cylinder?
Thank you for your inquire
This is a process meter that will take inputs for voltages & currents.
Also with a output of voltage & current
Please contact us directly to discuss further
Date published: 2020-10-19
how to i zero out the meter shows load when no load
Thank you for your inquiry, this information can be located in the product manual, if you require additional help please contact our engineering team at info@omega.com
Date published: 2022-02-18
Can I use a DP7600 series meter with a LD500-5 Transducer?
No the LD500-5 is not compatible with DP7600. If power with the minimum required excitation of 10VDC the sensor will product a +/- 2.800 VDC output. This is much too large of a signal for the DP7600 to accept
Date published: 2022-04-22
What are the dimensions?????????? DEPTH REQUIRED?????????
Panel cutout for this diplay is standard 1/8 DIN 45mm x 92mm (1.78" x 3.64"). Depth behind panel 148.8mm (5.86" max). Height & Width of display in front of panel 48mm x 96mm (1.89'' x 3.78").
Date published: 2019-09-19