Skip to main content Skip to navigation

Contact

Omega Link M12 Modular Smart Digital interface counter/totalizer

Smart Digital interface counter/totalizer with I/O

0,0

(0)

Cliquez et maintenez pour zoomer

Fiche technique (PDF)

C$172.07

Article# SP-013-1

Remises de volume disponibles

Calendrier de remise sur volume

Quantité	Prix unitaire
1-9	C$172.07
10-24	C$163.47
25-49	C$160.03
50-99	C$153.14
100-199	C$149.70
200+	C$146.26

Qté

Ajouté à votre panier

En stock

Délai de livraison (si pas en stock):5 journées

Ajouter à la liste des projets

Pulse Rate, Pulse Width, Pulse Duty Cycle, and Pulse Delay monitoring
Up/Down Counter
2x Digital I/O
Software configurable through SYNC configuration software

Voir Spécs

SP-013-1 Options de modèles

Voir tous les modèles

Modifiez ces spécifications pour commander un modèle différente. Toutes les combinaisons ne sont pas valides. Les options compatibles avec les sélections précédentes seront en gras.

*Les options en surbrillance ne sont pas compatibles. Veuillez sélectionner une combinaison différente.

Measurement Types

Number of Channels

Input Types

Sensor connection

Additional Features

Specs

Modifier les options du modèles

The Omega Link SP-013 Digital Interface Smart Probe provides an easy way to integrate digital pulse inputs to your Omega Link Ecosystem. The SP-013 accepts digital pulse inputs through its M12 5-pin connector and Omega Link Smart Interfaces through its M12 8-pin connector. The optional M12.5-S-M-FM connector can be utilized to easily connect wire leads to your SP-013.

The SP-013 may be configured to monitor the on/off state of the input signals, the pulse rate/ duty cycle of the primary input, or the pulse delay between the two signals. The pulse totalizing function supports both standard counting and up/down counting.

Edge Control and Built in I/O

The Omega Link SP-013 features 2 configurable digital I/O pins.These can be used for a myriad of applications including driving relays, physical alarms, or sensing dry contacts like door switches. The SP-013 can also be utilized as an edge controller, with autonomous independent decision-making capabilities to generate local alarms or provide control outputs based on sensor inputs.

Smart Core Enabled

Smart core is integral to all Omega Link Smart Probes. This powerful suite of advanced features enable plug and play connectivity, alarms and notifications, data assurance, data logging, and storage.

Smart Interface Modularity

Customize your Omega Link Ecosystem with modular Smart Interfaces that connect and transmit data from your Smart Probe to the Omega Link Cloud.

Intuitive Configuration

Configure your Omega Link Smart Probe using SYNC’s intuitive configuration interface.

Your Data at a Glance with Omega Link Cloud

Omega Link Cloud consolidates and brings your data to you when you need it, wherever you are. The intuitive cloud interface allows you to monitor and store your data, set alarms and alerts, and provides insights on device activity. Visit the OMEGA website for more details.

Specifications

INPUT POWER

Voltage: 2.8 _VDC - 3.3 _VDC

DIO DIGITAL INPUTS

V_{inHighThreshold}= 2.2 V_MAX
V_{inLowThreshold}= 0.3 V_MIN
V_inMAX= 30 V_DC

DIO DIGITAL OUTPUTS

2x Open Drain 100 mA max
V_MAX= 30 V_DC

ENVIRONMENTAL

Operating Temperature: -40 to 85℃ (-40 to 185℉)
Rating: IP67 when mated

MECHANICAL

Dimensions: 22.1 mm W x 96.7 mm L (0.87” x 3.80”) not including mounting tabs

GENERAL

Agency Approvals: CE, EMC 2014/30/EU, LVD 2014/35/EU
Compatibility: Compatible with OEG, SYNC configuration software, Omega Link Cloud, and Modbus Networks

M12 5-Pin Wiring

Pin	Frequency, Width, Duty Cycle	Delay	Up/ Down Counter	Digital Input
Pin 1	3.3V Power
Pin 2	Pulse	Pulse A	Pulse	Input 1
Pin 3	GND
Pin 4	Enable	Pulse B	Direction	Input 3
Pin 5	Reset			Input 2

M12 8-Pin Wiring

Pin	Name	Function
Pin 1	DIO 0	Discrete I/O Signal 0
Pin 2	INTR	Interrupt Signal
Pin 3	SCL	I2C Clock Signal
Pin 4	SDA	I2C Data Signal
Pin 5	Shield	Shield Ground
Pin 6	DIO 1	Discrete I/O Signal 1
Pin 7	GND	Power Ground
Pin 8	3.3VDD	Power Supply

Omega Link SP-013

Model Number	Description
SP-013-1	Digital Interface Smart Probe with discrete I/O

Omega Link Smart Interface

Omega Link Smart Probes require an Omega Link Smart Interface to operate and connect to your Omega Link Ecosystem.

Model Number	Description
IF-001	USB Smart Interface
IF-002	RS485/Modbus Smart Interface

Accessories

An optional M12 5-pin screw terminal adapter is available for users who wish to connect wire leads directly to the SP-013.

Model Number	Description
M12.5-S-M-FM	M12 5-pin screw terminal adapter
M12.8-T-SPLIT	Smart Probe M12-8 pin shielded T-Splitter - enables access to I/O pins
M12.8-S-M-FM	M12-8 pin Straight Plug Field install connector with screw terminals
DM12CAB-8-1-RA	1m (3.3’) cable dual M12-8 connector, right angle terminator
DM12CAB-8-3-RA	3m (9.8’) cable dual M12-8 connector, right angle terminator
DM12CAB-8-5-RA	5m (16.4’) cable dual M12-8 connector, right angle terminator
DM12CAB-8-1	1m (3.3’) cable dual M12-8 straight connector
DM12CAB-8-3	3m (9.8’) cable dual M12-8 straight connector
DM12CAB-8-5	5m (16.4’) cable dual M12-8 straight connector