Appelez-nous au 1-888-826-6342
Long Range Wireless Process and Pulse Smart Sensor 915 MHZ
Process and Pulse Smart Sensor 915 MHZ
This product is currently unavailable. For a potential alternate, please see IF-006-1-NA and SP-014-1
- 3 configurable Process/Digital Pulse Inputs
- Robust long-range sub-GHz communication
- Easy setup with one-button pairing
- AES-256 encrypted wireless link keeps your data secure
Introduction: SS-015
The Omega Link SS-015 Smart Sensor provides an easy way to integrate process and digital pulse inputs to your Omega Link Ecosystem. SS-015 Smart Sensors provide a long-range wireless sub GHz interface for devices that produce both process and digital signals and transmits them to the Omega Link Cloud. External process and digital signal devices connect to the SS-015 through an M12 5-pin connector (M12.5-S-M-FM screw terminal accessory sold separately) and easily pair to a Omega Link Gateway through a one-button pairing system. The device can be powered by internal batteries, USB power, or an optional external power source (sold separately). The SS-015 may be configured to monitor up to 3 industry standard process signals including 4-20 mA, 0-1.0 VDC, and 0-2.0 VDC. The SS-015 may also be configured to monitor the on/off state of the input signals, the pulse rate/width and duty cycle of the primary input, or the pulse delay between the two signals. The pulse totalizing function supports both standard counting and up/down counting. Each of the 3 inputs can be individually configured to allow mixed configurations to monitor both Process and Pulse Signals simultaneously. Additionally, a low power sensor signal excitation power output is available.
Plug and Play
The SS-015 is easily paired to the Omega Link Gateway with the press of a button and will automatically show up on your Omega Link Cloud account. The Omega Link Gateway can connect up to 256 Smart Sensors3 per unit. Local data logging keeps your data secure in the event of a power or network outage. Reports, History, and E-mail alerts from the Omega Link Cloud keep you informed on the status of all your vital processes.
Intuitive Configuration
Configure your Omega Link Smart Sensor using our free SYNC configuration software. Configurable features include selective data extraction, measurement and device traceability, local alarms, and adaptive transmission rates to reduce data congestion and extend battery life.
Security and Access Control
Omega Link wireless products are designed with state of the art security features to protect your data with robust AES256 encryption and advanced PKA-EC521bit (NIST) elliptic-curve cryptography to protect your data. Password protection ensures that access to device data is restricted and only accessible by authorized users. Device Authentication ensures that Omega Link Smart probes connect to validated Omega devices.
Compatibility
The SS-015 is fully compatible with the Omega Link ecosystem of devices, SYNC configuration software, and the Omega Link Cloud.
- 1. 256 sensors are supported at typical update intervals, on the order of 60 minutes, higher data rates or adverse environmental conditions may diminish the number of sensors supported.
Specifications
Wireless Communication Frequency: 915 MHzRange:: Up to 1.2 km in low power mode
Up to 3.2 km in high power mode
*Clear line of sight. Actual range may vary depending on environment.
Power
Alkaline Battery: 2x C-Cell batteries (included)Lifetime: Up to 1.5 years with frequency of 1 reading per hour
External Power: 5 VDC @ 1.75 W
*External power adapter optional. External power specification based on Omega specific power adaptor
Environmental
Operating Conditions for Base Unit: -200C to 700C (-40F to 1580F), 90% RH non-condensingRating: IP65
Signal Excitation Power: Nominal 3.0 VDC @100 mA
Low Power Sensor Signal Excitation Power: Nominal 3.3 VDC, current limited to 30 mA
Digital Inputs
ON: 1.0 VDCOFF: 0.7 VDC
Internal Pull Up/Down:1.5k to 3.0 VDC
Comparator (Clock) Input:100 mV, 500 mV, 1.0 VDC, 2.0 VDC
Specifications (continued)
Type | Range | Operating Conditions | Accuracy |
---|---|---|---|
Frequency (f) | 0.1 Hz to 100 Hz | TPW MIN = 200 uS | ±0.5% |
Frequency (f) | 100 Hz to 1000 Hz | TPW MIN = 200 uS | ±1 Hz averaged over 1 sec. |
Counter | 0 to +8388608 | 0 to +8388608 | ±1 count max |
Up/Down Counter | -8388608 to +8388608 | 1 kHz Max Rate | ±1 count max |
Pulse Width (TPW) | 200 uS min | ± 50 uS ±1% | |
Pulse Delay (TPP) | 200 uS min | ±50 uS ±1% | |
Duty Cycle | 1% to 99% | 0.01 Hz to 1000 Hz, TPW MIN = 200 uS | ±1.5% Max |
Analog Inputs
Type | Range | Resolution | Min | Max | Accuracy | Input Independence |
---|---|---|---|---|---|---|
Current Loop | 0-24 mA | ±0.1 mA | 0 mA | 24 mA | ±0.2 mA | 50 ohm |
Voltage | 0-1.0 VDC | ±10 mV | 0 VDC | 1.2 VDC | ±10 mV | 100k ohm |
Voltage | 0-2.0 VDC | ±10 mV | 0 VDC | 2.5 VDC | ±20 mV | 100k ohm |
General
Software: Compatible with SYNCCertification
Contains FCC ID:WR3-MOD16370915Contains IC ID: 8205A-MOD16370915
M12 5-Pin Wiring

Pin | Process /Analog | Digital | Mixed Mode |
---|---|---|---|
Pin 1 | Excitation Power (3.3 VDC, 100 mA) | Excitation Power (3.3 VDC, 100 mA) | Excitation Power (3.3 VDC, 100 mA) |
Pin 2 | Process 0 | DIN 0/Pulse A | DIN 0/Pulse A |
Pin 3 | Ground Reference | Ground Reference | Ground Reference |
Pin 4 | Process 2 | DIN 2/Enable/ Direction/ Pulse B | Process 0 |
Pin 5 | Process 1 | DIN 1/Reset | DIN 1/Reset |
Your Data at a Glance with Omega Link Cloud
Omega Link Cloud consolidates and brings your data to you when you need it, wherever you are. The intuitive cloud interface allows you to monitor and store your data, set alarms and alerts, and provides insights on device activity.Visit the OMEGA website for more details.

Wireless Sub GHz Smart Interface
Model Number | Description |
---|---|
SS-015-NA | Wireless Sub-GHz Process and Digital Pulse Input Smart Sensor - 915 MHz |
Omega Link Wireless Gateways
A Omega Link Wireless Gateway is required to connect your SS-015 to the Omega Link Cloud.
Model Number | Description |
---|---|
GW-001-2-NA | Wireless IIoT Gateway Standard, Ethernet connectivity, connects up to 256 Omega Link Smart Sensors - 915 MHz |
GW-001-3-NA | Wireless IIoT Gateway Pro, Ethernet connectivity, power over Ethernet, connects up to 256 Omega Link Smart Sensors, Modbus RTU RS232/RS485 and Modbus TCP, 2x USB ports - 915 MHz |
GW-002-1-LTE | Wireless LTE IIoT Gateway Pro connects up to 40 Omega Link Smart Sensors, Modbus RTU RS232/ RS485 and Modbus TCP, 1x RJ45 port, 1x USB port -915 MHz |
Accessories
An optional M12 5-pin screw terminal adapter is recommended for users who will connect wire leads directly to the SS-015.
Model Number | Description |
---|---|
M12.5-S-M-FM | M12 5-pin screw terminal adapter |
UNIV-AC-100/240-5-M8 | Universal AC adapter with M8 connector |




Accessories-M12 8 pin cables and connectors
M12-5 pin Straight Plug Field install connector with screw terminals
C$26.62
118 In Stock
Layer N Wireless Gateways - A Layer N Wireless Gateway is required to connect your IF-006 to the Layer N Cloud.
Wireless IIoT Gateway Standard, Ethernet connectivity, connects up to 256 Layer N Smart Sensors - 915 MHz
C$359.58
340 In Stock
Wireless IIoT Gateway Pro, Ethernet connectivity, power over Ethernet, connects up to 256 Layer N Smart Sensors, Modbus RTU RS232/RS485 and Modbus TCP, 2x USB ports - 915 MHz
C$569.83
188 In Stock