Skip to search Skip to main content Skip to navigation

Contact

Nickel Chrome Flange Duct Heater up to 600°F and 2kW Power

MAXIMUM FLOW AIR HEATERS, For Low Pressure, High Flow Air Heating

(0)

Cliquez et maintenez pour zoomer

Fiche technique (PDF)

C$295.54

Article# AHF-06120

Remises de volume disponibles

Calendrier de remise sur volume

Quantité	Prix unitaire
1-4	C$295.54
5-9	C$280.76
10-24	C$274.85
25-49	C$263.03
50-99	C$257.12
100+	C$251.21

Qté

Ajouté à votre panier

En stock

Délai de livraison (si pas en stock): 10 semaines

Ajouter à la liste des projets

4-Inch O.D. Mounting Flange
Air Flows Up To 200 CFM*
Exit Air Temperatures up to 600°F
Post Terminals Junction Box

Voir Spécs

AHF-06120 Options de modèles

Voir tous les modèles

Modifiez ces spécifications pour commander un modèle différente. Toutes les combinaisons ne sont pas valides. Les options compatibles avec les sélections précédentes seront en gras.

*Les options en surbrillance ne sont pas compatibles. Veuillez sélectionner une combinaison différente.

Power

Power Density

Supply Voltage

Maximum Outlet Air Temperature

Mounting Style

Mounting Size

Sheath Material

Specs

Modifier les options du modèles

CFM	Max. Watts/Linear Inch of Heated Length
1	150
2	150
4	150
6	150
8	150
10	150
20	175
30	275
40	350
50	450
60	525

APPLICATIONS
The AHF series maximum flow air heaters are used with blowers or recirculating air in baking, drying, and preheating applications.

This air heater is designed with a 23/8' O.D. aluminum tube and a cross frame heating element for minimum resistance to air flow. The nickel-chrome heating element is insulated by ceramic beads on a stainless steel support frame which is firmly secured to the inside of the tube. Post terminals enclosed in a junction box simplify the wiring. A four-inch round flange with pre-drilled holes at the inlet side are used for mounting the heater. It has a practical operating range of up to 200 CFM with temperatures up to 600 °F (315°C).

Calculate the flow rate, temperature rise, or power requirement as follows:
Watts = SCFM x ΔT/3
SCFM = Standard Cubic Feet Per Minute
ΔT = Temperature Rise inDegrees F from the Inlet to the Outlet
Minimum flow rates are given in the table below.

SPECIFICATIONS
Maximum Amperage: 15
Cross Sectional Flow Area: 3.5 square inches
Threaded Terminals: 6-32

Model Number	Volts	Watts	Heated Length in (mm)	Watts/Inch**	Maximum CFM	Length in (mm)	Weight lb (kg)
120 VAC Models
AHF-06120	120	600	4 (102)	150	200	6 (152)	0.5 (0.23)
AHF-10120	120	1000	8 (203)	125	200	10 (254)	1.25 (0.57)
120/240 VAC Models*
AHF-12240	120 240	375 1500	10 (254) 10 (254)	38 150	200 200	12 (305)	1.5 (0.68)
AHF-14240	120 240	500 2000	12 (305) 12 (305)	42 166	200 200	14 (356)	1.75 (0.79)

*These air heaters can be operated on either 120 or 240 Volts. Specifications are given for operation on both 120 and 240 Volts.
**Indicates Watts per inch of heated length. Use the table above to determine minimum required flow rates. The Watts per inch of heated length can be changed by reducing the operating voltage or by ordering a custom made heater. Stainless steel construction also available. Consult Engineering.

All Models

In Stock Only

passer en revue

Manuals & Downloads

Fiche technique (1)

AHF-HEATER_spec

Conformité (3)

Questions et réponses

What size is the conduit knockout in the junction box?

Asked by: automation guy

The information for the knockout is not in any of the documentation but it is most likely a standard size used in electrical applications. If you need to know exactly send your question to temp@dwyeromega.com so it can be researched.

Answered by: ApplicationsEngineerANB

Date published: 2023-12-15

Can this unit be run using a DC power supply?

Asked by: santi

The AHF series heaters are rated for AC only. We offer 120 and 240 vac options.

Answered by: RD Engineer

Date published: 2020-03-25

Since it is sold in Canada, is it safe to assume that it is CSA or ULC approved?

Asked by: Sean_S

Hi Sean_S Thank you for the inquiry. Unfortunately the AHF heaters are not CSA or UL approved. Best regards OMEGA

Answered by: NorwalkAE_RS

Date published: 2022-08-30

Can I please know if this product is CSA approved or could be used in Canada ??? 

Asked by: Medi

Thank you for your inquiry Medi. The AHF heaters are not CSA approved.

Answered by: Application Engineer MC

Date published: 2022-09-09

I am making a low temp prepreg oven, I am curious if the AHF-10120 would be heat a area of between 27 to 48 cubic feet using a recirculating fan to about 350 to 400 degrees F.

Asked by: Michael C

Thank you for your inquiry. Please email you application requirements to heaters@omega.com and we will review and advise.

Answered by: Application Engineer JB

Date published: 2020-12-07