Appelez-nous au 1-888-826-6342
Borniers et adaptateurs pour connecteurs
Drum Immersion Heaters for High Viscosity Solutions and Adjustable Stainless Steel Mounting Bracket
Remises de volume disponibles
Calendrier de remise sur volume
Quantité | Prix unitaire |
---|---|
1-4 | C$1 103.95 |
5-9 | C$1 048.75 |
10-24 | C$1 026.67 |
25-49 | C$982.52 |
50-99 | C$960.44 |
100+ | C$938.36 |
Ajouté à votre panier
Configuration terminée.
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Échec de l'enregistrement des configurations, cliquez sur le bouton Configurer Recommencer
- Fits Through the Standard 51 mm (2') Bung Opening in 55 Gallon Drums
- Ideal for Improving the Flow of Lard, Tar, Oils and Other High Viscosity Solutions
- Double Pole 16 to 121ºC (60 to 250°F) Thermostat with Over- Temperature Cutout and Pilot Lamp to Indicate Heater On/Off Status
- Only 203 mm (8') of Vertical Riser is Heated, Allowing Liquid Level to Fluctuate without Damaging the Heater
TAT30001 Options de modèles
Voir tous les modèlesModifiez ces spécifications pour commander un modèle différente. Toutes les combinaisons ne sont pas valides. Les options compatibles avec les sélections précédentes seront en gras.
*Les options en surbrillance ne sont pas compatibles. Veuillez sélectionner une combinaison différente.
Power
Power Density
Supply Voltage
Sheath Material
Form Factor
Heating Element Length
Riser Length
Maximum Operating Temperature
Minimum Operating Temperature
Features
Installation, Operation and Maintenance Instructions
1. Ensure the Vertical Heated Portion, Which Extends 203 mm (8") Up Riser from Bottom of Element, is Always Fully Immersed
2. Use in Metal Drums, Containers or Heat Resistant Tanks Only
3. All Wiring Should Be in Accordance with NEC/Nfpa and Local Codes
4. Use Techniques Safe for the Heater and Surrounding Environment
5. Use Mounting Brackets to Position Heater Away from Tank Wall and Above Sludge Buildup at Bottom of Tank
6. Periodically Remove the Heater to Clean Residues and Inspect for Damage
1. Ensure the Vertical Heated Portion, Which Extends 203 mm (8") Up Riser from Bottom of Element, is Always Fully Immersed
2. Use in Metal Drums, Containers or Heat Resistant Tanks Only
3. All Wiring Should Be in Accordance with NEC/Nfpa and Local Codes
4. Use Techniques Safe for the Heater and Surrounding Environment
5. Use Mounting Brackets to Position Heater Away from Tank Wall and Above Sludge Buildup at Bottom of Tank
6. Periodically Remove the Heater to Clean Residues and Inspect for Damage
Model No. | Sheath | Watt Density | Watts | Volts | A | B | |||
---|---|---|---|---|---|---|---|---|---|
watt/in2 | watt/cm2 | mm | inch | mm | inch | ||||
TAT30003 | Copper | 8 | 1.2 | 1000 | 120 | 914 | 36 | 483 | 19 |
TAT30004 | 32 | 5.0 | 4000 | 240 | |||||
TAT30002 | Stainless Steel | 8 | 1.2 | 1000 | 120 | 914 | 36 | 483 | 19 |
TAT30001 | 32 | 5.0 | 4000 | 240 | |||||
TAT30005 | Steel | 8 | 1.2 | 1000 | 120 | 914 | 36 | 483 | 19 |
TAT30006 | 32 | 5.0 | 4000 | 240 | |||||
Note: This style heater can be manufactured with “A” and “B” dimensions suitable for other applications. Consult Omega with your requirements. Ordering Example: TAT30003, 1000 watts, 120 Vac immersion heater. |