Skip to search Skip to main content Skip to navigation

Contact

Silicone Rubber Fiberglass Flexible Heater 450°F Max to 48"

Silicon Heaters | Flexible heating elements in Rubber and Fiberglass

4,5

(11)

Silicon Heaters | Flexible heating elements in Rubber and Fiberglass

Cliquez et maintenez pour zoomer

C$83.42

Article# SRFRA-4/5-P

Remises de volume disponibles

Calendrier de remise sur volume

Quantité	Prix unitaire
1-9	C$83.42
10-24	C$79.25
25-49	C$77.58
50-99	C$74.24
100-199	C$72.58
200+	C$70.91

Qté

Ajouté à votre panier

En stock

Délai de livraison (si pas en stock): 5 semaines

Ajouter à la liste des projets

Lightweight,Thin, Flexible
Available in 2.5, 5 and 10 W/in²
-56°C(-70°F) to 232°C (450°F) Operating Temperature
Etched Foil

Voir Spécs

SRFRA-4/5-P Options de modèles

Voir tous les modèles

Modifiez ces spécifications pour commander un modèle différente. Toutes les combinaisons ne sont pas valides. Les options compatibles avec les sélections précédentes seront en gras.

*Les options en surbrillance ne sont pas compatibles. Veuillez sélectionner une combinaison différente.

Shape

Temprature range

Power Density

Power (watts)

Supply Voltage

Diameter

Width

Length

Pressure senstivie Adhesive (PSA)

Additional Option

Thickness

Heater Material

Specs

Modifier les options du modèles

Silicone rubber fiberglass insulated flexible heaters can improve heat transfer and speed warm-ups where controlled heating is required in confined areas. Two circuit designs are available: etched foil or wire wound. Heaters with etched foil designed elements are available where the length or width dimension is less than 10"(254 mm). All other heaters where both the length and the width dimensions exceed 10" (254 mm) use the wire-wound element design. Effect of power density: gentle warming is best done with 2.5 W/in². An excellent all-purpose unit is the 5 W/in². Rapid warm-up and high temperature are achieved with the 10 W/in²; however, the temperature must be controlled as the safe maximum operating temperature limit of 450°F (232°C) may be exceeded.

CAUTION AND WARNING!
Fire and electrical shock may result if products are misused or installed or used by non-qualified personnel. See inside back cover for additional warning.

Applications
-Freeze Protection
-Low-Temperature Ovens
-Heat Tracing Systems
-Viscosity Control
-Dehumidification of Motors and Control Devices

SPECIFICATIONS
Wattage: 5 to 1440 Watts
Power: 115 or 230** VAC
Watt Density: 2.5, 5 and 10 W/in2
Lead Wire:
305 mm (12") PFA insulated
Thickness: 0.040" except at lead wire exit
Dielectric Strength: 1250 VAC
Maximum Temperature: heaters
without pressure sensitive adhesive, 232°C (450°F); heaters with pressure sensitive adhesive, 149°C (300°F)
Minimum Temperature: -56°C (-70°F)

Round Silicone Rubber Heaters

Without PSA Model No.	With PSA Model No.	Diameter in. (cm)	Total Wattage for Watt Density
Without PSA Model No.	With PSA Model No.	Diameter in. (cm)	2.5W/in²	5W/in²	10W/in²
SRFRA-3/*	SRFRA-3/*-P	3 (7.62)	-	35	70
SRFRA-4/*	SRFRA-4/*-P	4 (10.16)	31	62.8	125.6
SRFRA-5/*	SRFRA-5/*-P	5 (12.7)	-	98.15	196.3
SRFRA-6/*	SRFRA-6/*-P	6 (15.24)	-	141.3	282.7
SRFRA-7/*	SRFRA-7/*-P	7 (17.78)	96.2	192.4	384.8
SRFRA-8/*	SRFRA-8/*-P	8 (20.32)	125.65	251.3	502.6
SRFRA-9/*	SRFRA-9/*-P	9 (22.86)	157.9	315.8	631.7
SRFRA-10/*	SRFRA-10/*-P	10 (25.4)	196.25	392.5	785

/*Insert watt density: 2 for 2.5 W/in²,5 for 5 W/in² or 10 for 10 W/in².

If the table shows a "-" we do not offer the item in that dimension.

Rectangular Silicone Rubber Heaters

Without PSA Model No.	With PSA Model No.	Width, In.(cm)	Length, In.(cm)	Total Wattage for Watt Density
Without PSA Model No.	With PSA Model No.	Width, In.(cm)	Length, In.(cm)	2.5W/in²	5W/in²	10W/in²
SRFGA-101/*	SRFGA-101/10-P	1(3)	1(3)	-	-	-
SRFGA-102/*	SRFGA-102/*-P	1(3)	2(5)	-	-	-
SRFGA-103/*	SRFGA-103/*-P	1(3)	3(8)	-	-	30
SRFGA-104/*	SRFGA-104/*-P	1(3)	4(10)	-	20	40
SRFGA-105/*	SRFGA-105/*-P	1(3)	5(13)	12.5	25	50
SRFGA-106/*	SRFGA-106/*-P	1(3)	6(15)	15	30	60
SRFGA-107/*	SRFGA-107/*-P	1(3)	7(18)	17.5	35	70
SRFGA-108/*	SRFGA-108/*-P	1(3)	8(20)	20	40	80
SRFGA-109/*	SRFGA-109/*-P	1(3)	9(23)	22.5	45	90
SRFGA-110/*	SRFGA-110/*-P	1(3)	10(25)	25	50	100
SRFGA-111/*	SRFGA-111/*-P	1(3)	11(28)	27.5	55	110
SRFGA-112/*	SRFGA-112/*-P	1(3)	12(30)	30	60	120
SRFGA-118/*	SRFGA-118/*-P	1(3)	18(46)	45	90	180
SRFGA-124/*	SRFGA-124/*-P	1(3)	24(61)	60	120	240
SRFGA-130/*	SRFGA-130/*-P	1(3)	30(76)	75	150	300
SRFGA-136/*	SRFGA-136/*-P	1(3)	36(91)	90	180	360
SRFGA-142/*	SRFGA-142/*-P	1(3)	42(107)	105	210	420
SRFGA-148/*	SRFGA-148/*-P	1(3)	48(122)	120	240	480
SRFGA-202/*	SRFGA-202/*-P	2(5)	2(5)	-	-	40
SRFGA-203/*	SRFGA-203/*-P	2(5)	3(8)	15	30	60
SRFGA-204/*	SRFGA-204/*-P	2(5)	4(10)	-	40	80
SRFGA-205/*	SRFGA-205/*-P	2(5)	5(13)	25	50	100
SRFGA-206/*	SRFGA-206/*-P	2(5)	6(15)	30	60	120
SRFGA-207/*	SRFGA-207/*-P	2(5)	7(18)	35	70	140
SRFGA-208/*	SRFGA-208/*-P	2(5)	8(20)	40	80	160
SRFGA-209/*	SRFGA-209/*-P	2(5)	9(23)	45	90	180
SRFGA-210/*	SRFGA-210/*-P	2(5)	10(25)	50	100	200
SRFGA-211/*	SRFGA-211/*-P	2(5)	11(28)	55	110	220
SRFGA-212/*	SRFGA-212/*-P	2(5)	12(30)	60	120	240
SRFGA-218/*	SRFGA-218/*-P	2(5)	18(46)	90	180	360
SRFGA-224/*	SRFGA-224/*-P	2(5)	24(61)	120	240	480
SRFGA-230/*	SRFGA-230/*-P	2(5)	30(76)	150	300	600
SRFGA-236/*	SRFGA-236/*-P	2(5)	36(91)	180	360	720
SRFGA-242/*	SRFGA-242/*-P	2(5)	42(107)	210	420	840
SRFGA-248/*	SRFGA-248/*-P	2(5)	48(122)	240	480	960
SRFGA-303/*	SRFGA-303/*-P	3(8)	3(8)	22.5	45	90
SRFGA-304/*	SRFGA-304/*-P	3(8)	4(10)	30	60	120
SRFGA-305/*	SRFG-305/*-P	3(8)	5(13)	37.5	75	150
SRFGA-306/*	SRFGA-306/*-P	3(8)	6(15)	45	90	180
SRFGA-307/*	SRFGA-307/*-P	3(8)	7(18)	52.5	105	210
SRFGA-308/*	SRFGA-308/*-P	3(8)	8(20)	60	120	240
SRFGA-309/*	SRFGA-309/*-P	3(8)	9(23)	67.5	135	270
SRFGA-310/*	SRFGA-310/*-P	3(8)	10(25)	75	150	300
SRFGA-311/*	SRFGA-311/*-P	3(8)	11(28)	82.5	165	330
SRFGA-312/*	SRFGA-312/*-P	3(8)	12(30)	90	180	360

/*Insert watt density: 2 for 2.5 W/in²,5 for 5 W/in² or 10 for 10 W/in².

If the table shows a "-" we do not offer the item in that dimension.

Rectangular Silicone Rubber Heaters

Without PSA Model No.	With PSA Model No.	Width, In.(cm)	Length, In.(cm)	Total Wattage for Watt Density
Without PSA Model No.	With PSA Model No.	Width, In.(cm)	Length, In.(cm)	2.5W/in²	5W/in²	10W/in²
SRFGA-318/*	SRFGA-318/*-P	3(8)	18(46)	135	270	540
SRFGA-324/*	SRFGA-324/*-P	3(8)	24(61)	180	360	720
SRFGA-330/*	SRFGA-330/*-P	3(8)	30(76)	225	450	900
SRFGA-336/*	SRFGA-336/*-P	3(8)	36(91)	270	540	1080
SRFGA-342/*	SRFGA-342/*-P	3(8)	42(107)	315	630	1260
SRFGA-348/*	SRFGA-348/*-P	3(8)	48(122)	360	720	-
SRFGA-404/*	SRFGA-404/*-P	4(10)	4(10)	40	80	160
SRFGA-405/*	SRFGA-405/*-P	4(10)	5(13)	50	100	200
SRFGA-406/*	SRFGA-406/*-P	4(10)	6(15)	60	120	240
SRFGA-407/*	SRFGA-407/*-P	4(10)	7(18)	70	140	280
SRFGA-408/*	SRFGA-408/*-P	4(10)	8(20)	80	160	320
SRFGA-409/*	SRFGA-409/*-P	4(10)	9(23)	90	180	360
SRFGA-410/*	SRFGA-410/*-P	4(10)	10(25)	100	200	400
SRFGA-411/*	SRFGA-411/*-P	4(10)	11(28)	110	220	440
SRFGA-412/*	SRFGA-412/*-P	4(10)	12(30)	120	240	480
SRFGA-418/*	SRFGA-418/*-P	4(10)	18(46)	180	360	720
SRFGA-424/*	SRFGA-424/*-P	4(10)	24(61)	240	480	960
SRFGA-430/*	SRFGA-430/*-P	4(10)	30(76)	300	600	1200
SRFGA-436/*	SRFGA-436/*-P	4(10)	36(91)	360	720	-
SRFGA-442/*	SRFGA-442/*-P	4(10)	42(107)	420	840	-
SRFGA-448/*	SRFGA-448/*-P	4(10)	48(122)	480	960	-
SRFGA-505/*	SRFGA-505/*-P	5(13)	5(13)	62.5	125	250
SRFGA-506/*	SRFGA-506/*-P	5(13)	6(15)	75	150	300
SRFGA-507/*	SRFGA-507/*-P	5(13)	7(18)	87.5	175	350
SRFGA-508/*	SRFGA-508/*-P	5(13)	8(20)	100	200	400
SRFGA-509/*	SRFGA-509/*-P	5(13)	9(23)	112.5	225	450
SRFGA-510/*	SRFGA-510/*-P	5(13)	10(25)	125	250	500
SRFGA-511/*	SRFGA-511/*-P	5(13)	11(28)	137.5	275	550
SRFGA-512/*	SRFGA-512/*-P	5(13)	12(30)	150	300	600
SRFGA-606/*	SRFGA-606/*-P	6(15)	6(15)	90	180	360
SRFGA-607/*	SRFGA-607/*-P	6(15)	7(18)	105	210	420
SRFGA-608/*	SRFGA-608/*-P	6(15)	8(20)	120	240	480
SRFGA-609/*	SRFGA-609/*-P	6(15)	9(23)	135	270	540
SRFGA-610/*	SRFGA-610/*-P	6(15)	10(25)	150	300	600
SRFGA-611/*	SRFGA-611/*-P	6(15)	11(28)	165	330	660
SRFGA-612/*	SRFGA-612/*-P	6(15)	12(30)	180	360	720
SRFGA-618/*	SRFGA-618/*-P	6(15)	18(46)	270	540	1080
SRFGA-624/*	SRFGA-624/*-P	6(15)	24(61)	360	720	_
SRFGA-630/*	SRFGA-630/*-P	6(15)	30(76)	450	900	—
SRFGA-636/*	SRFGA-636/*-P	6(15)	36(91)	540	1080	—
SRFGA-642/*	SRFGA-642/*-P	6(15)	42(107)	630	1260	—
SRFGA-648/*	SRFGA-648/*-P	6(15)	48(122)	720	-	—
SRFGA-707/*	SRFGA-707/*-P	7(18)	7(18)	122.5	245	490
SRFGA-708/*	SRFGA-708/*-P	7(18)	8(20)	140	280	560
SRFGA-709/*	SRFGA-709/*-P	7(18)	9(23)	157.5	315	630

/*Insert watt density: 2 for 2.5 W/in²,5 for 5 W/in² or 10 for 10 W/in².

Rectangular Silicone Rubber Heaters

Without PSA Model No.	With PSA Model No.	Width, In.(cm)	Length, In.(cm)	Total Wattage for Watt Density
Without PSA Model No.	With PSA Model No.	Width, In.(cm)	Length, In.(cm)	2.5W/in²	5W/in²	10W/in²
SRFGA-710/*	SRFGA-710/*-P	7(18)	10(25)	175	350	700
SRFGA-711/*	SRFGA-711/*-P	7(18)	11(28)	192.5	385	770
SRFGA-712/*	SRFGA-712/*-P	7(18)	12(30)	210	420	840
SRFGA-808/*	SRFGA-808/*-P	8(20)	8(20)	160	320	640
SRFGA-809/*	SRFGA-809/*-P	8(20)	9(23)	180	360	720
SRFGA-810/*	SRFGA-810/*-P	8(20)	10(25)	200	400	800
SRFGA-811/*	SRFGA-811/*-P	8(20)	11(28)	220	440	880
SRFGA-812/*	SRFGA-812/*-P	8(20)	12(30)	240	480	960
SRFGA-818/*	SRFGA-818/*-P	8(20)	18(46)	360	720	-
SRFGA-824/*	SRFGA-824/*-P	8(20)	24(61)	480	960	—
SRFGA-830/*	SRFGA-830/*-P	8(20)	30(76)	600	1200	—
SRFGA-836/*	SRFGA-836/*-P	8(20)	36(91)	720	-	—
SRFGA-842/*	SRFGA-842/*-P	8(20)	42(107)	840	-	—
SRFGA-848/*	SRFGA-848/*-P	8(20)	48(122)	960	-	—
SRFGA-909/*	SRFGA-909/*-P	9(23)	9(23)	202.5	405	810
SRFGA-910/*	SRFGA-910/*-P	9(23)	10(25)	225	450	900
SRFGA-911/*	SRFGA-911/*-P	9(23)	11(28)	247.5	965	990
SRFGA-912/*	SRFGA-912/*-P	9(23)	12(30)	270	540	1080
SRFGA-1010/*	SRFGA-1010/*-P	10(25)	10(25)	250	500	1000
SRFGA-1011/*	SRFGA-1011/*-P	10(25)	11(28)	275	550	1100
SRFGA-1012/*	SRFGA-1012/*-P	10(25)	12(30)	300	600	1200
SRFGA-1018/*	SRFGA-1018/*-P	10(25)	18(46)	450	900	—
SRFGA-1024/*	SRFGA-1024/*-P	10(25)	24(61)	600	1200	—
SRFGA-1030/*	SRFGA-1030/*-P	10(25)	30(76)	750	-	—
SRFGA-1036/*	SRFGA-1036/*-P	10(25)	36(91)	900	-	—
SRFGA-1042/*	SRFGA-1042/*-P	10(25)	42(107)	1050	—	—
SRFGA-1048/*	SRFGA-1048/*-P	10(25)	48(122)	1200	—	—
SRFGA-1111/*	SRFGA-1111/*-P	11(28)	11(28)	302.5	605	-
SRFGA-1112/*	SRFGA-1112/*-P	11(28)	12(30)	330	660	-
SRFGA-1212/*	SRFGA-1212/*-P	12(30)	12(30)	360	720	-
SRFGA-1218/*	SRFGA-1218/*-P	12(30)	18(46)	540	1080	—
SRFGA-1224/*	SRFGA-1224/*-P	12(30)	24(61)	720	-	—
SRFGA-1230/*	SRFGA-1230/*-P	12(30)	30(76)	900	—	—
SRFGA-1236/*	SRFGA-1236/*-P	12(30)	36(91)	1080	—	—

/*Insert watt density: 2 for 2.5 W/in²,5 for 5 W/in² or 10 for 10 W/in².

All Models

In Stock Only

passer en revue

Rated 5 out of 5 by Dario from Very durable and easy Wonderful product, I use it inside our Nema enclosure to avoid the switch to froze and they work great, very durable and super easy to install

Date published: 2021-05-06

Rated 5 out of 5 by Josep from Easy to install and functional. We are using them to bake an ultra-high vacuum chamber and they work very well.

Date published: 2024-02-09

Rated 5 out of 5 by Mackenzie Aircraft from Happy with Purchase Good quality, fast availability. Always easy to work with.

Date published: 2023-06-01

Rated 5 out of 5 by M ARM from Excellent Product as described, fast delivery, and easy order process

Date published: 2023-02-21

Rated 1 out of 5 by Anonymous from Buyer be where Picture is not what you will get. Nothing stated item will need other parts to work. Returned item at additional cost. VERY Frustrated.

Date published: 2023-02-08

Rated 5 out of 5 by Stanford from Great Product These were perfect for the application, I will be purchasing more in the future.

Date published: 2023-01-06

Rated 5 out of 5 by Josh b from Flexible Heater Great product. It works as intended with no issues.

Date published: 2022-11-11

Rated 5 out of 5 by Harrison Longbows from Five Stars This product can have multiple applications. I’m a bowyer. I use it to laminate bow limbs.

Date published: 2022-03-27

Silicon Heaters | Flexible heating elements in Rubber and Fiberglass Reviews - page 2

Manuals & Downloads

Manuels et guides (1)

SRFRA-SRFGA_manual manuel de l'utilisateur

Conformité (3)

Questions et réponses

i need to heat a small metal bucket to 300 degrees fahrenheit and maintain it for about 2 hours. the metal bucket is grounded. can these heaters do that without shorting out?

Asked by: tattooboy13

Thank you for your inquiry. Though the flexible can indeed heat surfaces of metal, we advise you click this link to find out the exact wattage needed in your application https://www.omega.com/en-us/resources/flexible-heaters

Answered by: Application Engineer CB

Date published: 2022-06-16

I am looking at trialing this product. Is there a Round in stock 110V that I can get quickly for trial purposes?

Asked by: Hannibal93

Thank you for your inquiry. Please contact our Sales Tema directly for product availability sales@omega.com

Answered by: CB Engineer

Date published: 2021-02-05

Will these work for replacement heater element on an ultrasonic cleaner?

Asked by: Mr Clean

Thank you for the inquiry. Please forward this question to TEMP@DWYEROMEGA.COM Best regards OMEGA

Answered by: Norwalk AE_RS

Date published: 2024-05-18

I need a pad that heats to 98 F and maintains at +- 2 degrees. Do any of these products do this? A 10 inch to 6 inch square works well. Thanks

Asked by: biggbell

Thank you for your inquiry biggbell. Unfortunately, we need more information in order to recommend a product like the power and power density. Please send an email to heaters@omega.com that way one of our engineers can provide further assistance.

Answered by: Application Engineer MC

Date published: 2024-03-22

i want to use a heater to heat and maintain a chamber at 140 degrees for extended periods of time. will something like a 10X11 silicon mat work to heat quickly?

Asked by: steveH

This would heat the material that it is attached to quickly if you purchase in 10 watts/sq. inch, but for chamber heater quickly, we would suggest some type of enclosure heater which would be more efficient. If you search our site by this keyword you will find various ones that can be chosen.

Answered by: dfrisby88

Date published: 2020-03-09

Can you please post the nominal thicknesses (main body and part where wires exit) for 3D modelling purposes?

Asked by: D Lombardo

For Dimensional details not specified in the Website manual(thickness varies with heater), please email your request to heaters@omega.com

Answered by: SAT_SAE

Date published: 2020-04-24

Hi! I want to use this to sit on the stage of an extrusion printer I am experimenting with. Does this come with a temperature controler or would I need to buy that separately?

Asked by: Diana

Thank you for your inquiry Diana. These heaters don't come with a temperature controller. You would need to buy them separately. Here is the general link to our PID controllers: https://www.omega.com/en-us/control-monitoring/controllers/c/pid-controllers

Answered by: Application Engineer SP

Date published: 2022-10-04

we are using these flexible rubber heaters with the CN16D3-R-AC PID controller and we are experience relay failures on the PID controllers. What do you recommend for protection of the mechanical relays when switching on these rubber heaters?

Asked by: Dovan

Thank you for your inquiry. For PID Control, which has continuous relay cycling, use a CN16D3-S-AC controller with a SSRL240DC10 Solid State Relay.

Answered by: Application Engineer CB

Date published: 2023-10-04

Silicon Heaters | Flexible heating elements in Rubber and Fiberglass Questions - page 2