PST rejoint DwyerOmega. En savoir plus>
Dual Element Heating Tape 1400°F Max and 120-240 Volts
High Temperature, Dual-Element Heating Tapes
Remises de volume disponibles
Calendrier de remise sur volume
| Quantité | Prix unitaire |
|---|---|
| 1-9 | C$168.90 |
| 10-24 | C$160.46 |
| 25-49 | C$157.08 |
| 50-99 | C$150.32 |
| 100-199 | C$146.94 |
| 200+ | C$143.57 |
Ajouté à votre panier
Configuration terminée.
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Échec de l'enregistrement des configurations, cliquez sur le bouton Configurer Recommencer
- Dual Element Heating
- Connects Easily to Your Choice of Temperature Control
- Wide Range of Sizes
DHT051060LD Options de modèles
Voir tous les modèlesModifiez ces spécifications pour commander un modèle différente. Toutes les combinaisons ne sont pas valides. Les options compatibles avec les sélections précédentes seront en gras.
*Les options en surbrillance ne sont pas compatibles. Veuillez sélectionner une combinaison différente.
Power (Watt)
Heater Length
Supply Voltage
Width/Diameter
Termination
Maximum Operating Temperature
Power Density
Lead wire Length
Lead wire Exit Direction
Built in Thermostat
Heater Insulation Material
Additional Option
The DHT Series is a highly flexible and durable multi-stranded dual heating element that provides even heat across the tape. It is reinforced with high temperature fiberglass for added strength and durability. High temperatures and rapid thermal response with a maximum exposure temperature of 760ºC (1400ºF).
Rated 5 out of
5
by
Nicpuma from
Very good tool!
I bought this article one a few weeks ago and we used for long run test. It perfomed very well without issues or performance loss.
Date published: 2017-03-13
Rated 5 out of
5
by
Steven from
CEO
I have using it to heat up electrical PVC pipes from size 0.5 to 3 ". Cheaper, faster and easier then other special devices. Only one Omega product, it can be replaced for 3 others in application to heat up then bend PVC pipes.
Date published: 2018-11-10
Does this product come with a CSA/ULc or equivalent approval?
Hi Dheaven72
Thank you for the inquiry. This product is not CSA/ULc or equivalent approved.
Best regards
OMEGA
Date published: 2022-06-08
Good day, Could you please help us out confirm that we can connect a heater DHT101080LD with this variac for temperature controller? https://www.amazon.com/gp/product/B0D5461Z23/ref=sw_img_1?smid=A2D6EDL5MBTI2K&psc=1 Thank you very much for your help.
Thank you for your inquiry. These heaters can be used with a variac. We recommend you use a temperature sensor and meter along with it.
Date published: 2024-06-12
Can you cut and make this a shorter length?
Hi MRA1
Thank you for the inquiry. Unfortunately we are unable to cut these to shorter lengths.
Best regards
OMEGA
Date published: 2021-10-27
Can I use this with omega bench top controller ?
Thank you for your inquiry. You can use a benchtop controller. Make sure the current draw from the heater does not exceed the controller's relay current rating.
Date published: 2023-10-31
Can this be connected to your omega cn7523 temperature controller? Or does it require some kind of hub for the 120v plug end?
Thanks for your inquiry. Most of our rope heaters have stripped ends and can be directly connected to controllers such as the CN7523; this heater has a formed plug at the end. In order to use w/ this controller and others of its type, you will need to cut the plug off, and wire according to manual instructions. There is no receptacle on the CN7523 that will directly take this heater plug connection.
Date published: 2021-10-27