Appelez-nous au 1-888-826-6342
Fiberglass Heater Tape 1400°F Max and 120-240 Volts
Ultra-High Temperature Heating Tapes
Remises de volume disponibles
Calendrier de remise sur volume
| Quantité | Prix unitaire |
|---|---|
| 1-9 | C$110.08 |
| 10-24 | C$104.58 |
| 25-49 | C$102.37 |
| 50-99 | C$97.97 |
| 100-199 | C$95.77 |
| 200+ | C$93.57 |
Ajouté à votre panier
Configuration terminée.
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Échec de l'enregistrement des configurations, cliquez sur le bouton Configurer Recommencer
- Température d'exposition maximale jusqu'à 760 °C (1 400 °C)
- Première qualité
- Isolation SamoxTM
- Fiche séparée entièrement moulée
- Disponible avec fils conducteurs à la même extrémité†
SST051-080 Options de modèles
Voir tous les modèlesModifiez ces spécifications pour commander un modèle différente. Toutes les combinaisons ne sont pas valides. Les options compatibles avec les sélections précédentes seront en gras.
*Les options en surbrillance ne sont pas compatibles. Veuillez sélectionner une combinaison différente.
Power (Watt)
Power Density
Heater Length
Supply Voltage
Width/Diameter
Lead wire Exit Direction
Termination
Additional Option
Maximum Operating Temperature
Lead wire Length
Built in Thermostat
Heater Insulation Material
Description
Cliquez sur le lien pour plus d’informations sur les eléments chauffant soupleLes rubans standard sont fabriqués à partir de fils de résistance très fins et toronnés, avec double isolation au Samox tressé et cousus en rubans plats pour une souplesse optimale.
Un ruban à isolation renforcée est obtenu en prenant un ruban standard et en le tressant entre plusieurs couches de brins de Samox. Les rubans larges sont obtenus à partir de deux rubans standard ou plus, cousus entre deux couches de tissu de Samox.
CARACTÉRISTIQUES
Éléments chauffants : fil de résistance toronné de calibre 36-40
Éléments chauffants isolés : Samox en double tresse
Rigidité diélectrique : supérieure à 2 000 V
Fils conducteurs : ils sortent des extrémités opposées de la fiche séparée entièrement moulée en sections distinctes. La température maximale des fils conducteurs est de 260 °C (500 °F).
Rated 5 out of
5
by
Testers from
New appliance
Works on dioxane need double element for sulfuric acid
Date published: 2018-11-30
Rated 5 out of
5
by
SEALEC Ecuador from
awesome heat conduction
We bought this product for my cousin in SA. He has a mechanical seals manufacturing business. The only way to make a permanent seal is with heat...we could not find a more effective product with awesome heat conduction for this purpose. It works like magic.
Date published: 2017-02-11
Rated 5 out of
5
by
JesseMER from
1/2" heater tape
Excellent quality, short lead time for a much better product than you can get at McMaster or Amazon
Date published: 2023-09-04
Rated 5 out of
5
by
Tape for fluid from
Heating tape
Very good quiality, the tape works well and we have some of the same brand and are in perfect status
Date published: 2023-02-09
Is 1400F (760C) mean reusable temperature or one-time?
The Heater tape will have to be attached to a Thermally Conductive surface across it's full length. What temperature that can be reached will depend on the Thermal mass and the Wattage of the specific Heater Tape. Once in place it is best to leave it in place as there will be some embrittlement. Running the Heater at full Voltage and power will reduce its expected useful life.
Date published: 2023-03-19
Can Ultra-High Temperature Heating Tape be used to heat a pipe will be buried under ground?
The Ultra-High Heating tape is not recommended for underground or wet environments. Look at self regulating or constant Wattage Heater tapes as a possible alternative.
Date published: 2022-04-07
What is a reliable temperature controller to use with heating tapes (Heating Tape STH051-080 for example? I am currently using an obsolete CN 9111A controller. These controllers worked fine but did not last very long (Mechanical relay and not SSR).
Thank you for your inquiry. The CN9111A suitable replacement would be a CNi1644 coupled with a SSRL240DC10 solid state relay.
Date published: 2023-05-04
Is this product UL US listed?
Thank you for your inquiry. This product is not UL listed.
Date published: 2022-04-11
Is the supply voltage for this heater AC or DC?
Thank you for your inquiry. This heater requires 120 Vac.
Date published: 2023-03-03
Do these flexible heaters have CSA certificate for application in Canada?
Hi Hossein,
Thank you for the inquiry. These do not include CSA certificate unfortunately.
Best regards
OMEGA
Date published: 2022-01-21
Hello! what is the difference between 120 or 240 volts? the size of the wire or its just the 240 volts does not come with a connector (model SST051-040) THANK YOU FOR YOUR TIME
Thank you for your inquiry. The difference is that 240V Version does not come with a plug.
Date published: 2022-10-11
Is the fiberglass insulation enough to prevent electrical shorting on conductive surfaces?
The Fiberglass insulation on the STH and SWH models provides the electrical insulation needed to be able to be use them on conductive surfaces.
Date published: 2021-11-16