Appelez-nous au 1-888-826-6342
Worm Gear Speed Reducers
Remises de volume disponibles
Calendrier de remise sur volume
Quantité | Prix unitaire |
---|---|
1-9 | C$287.28 |
10-24 | C$272.92 |
25-49 | C$267.17 |
50-99 | C$255.68 |
100-199 | C$249.93 |
200+ | C$244.19 |
Ajouté à votre panier
Configuration terminée.
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Échec de l'enregistrement des configurations, cliquez sur le bouton Configurer Recommencer
- 8 Ratios Available from 5:1 to 60:1
- 7 Gear Box Sizes from 1.33 to 3.25'
- Universally Interchangeable Design for OEM Replacement
- Double Bearings Used on Both Shaft Ends
HDRF133-5/1-L-56C Options de modèles
Voir tous les modèlesModifiez ces spécifications pour commander un modèle différente. Toutes les combinaisons ne sont pas valides. Les options compatibles avec les sélections précédentes seront en gras.
*Les options en surbrillance ne sont pas compatibles. Veuillez sélectionner une combinaison différente.
Output Type
Input Type
Box Size
Features
Input Speed Ratio
The HDR Series worm gear reducers are used in low to moderate horsepower applications to reduce speeds and increase torque. Worm gear reducers are available in direct or indirect drive, direct drive models are 56C or 145TC flange mount with either right, left or dual output shafts or a hollow bore output. The indirect drive models are shaft input-shaft output boxes for use with sprocket or pulley drive systems. They provide an effective low cost solution to speed reduction and increased torque, with higher tolerances for shock loading than helical gear reducers.
In order to select a gearbox speed reducer, you will need to determine the required torque and service factor for the application. Click on 'Specs' above for a table that will assist in determining the service factor. For service factors above 1.0, multiply the required torque by the service factor.
Use the Part Number Builder (below the ordering table) to find additional models
In order to select a gearbox speed reducer, you will need to determine the required torque and service factor for the application. Click on 'Specs' above for a table that will assist in determining the service factor. For service factors above 1.0, multiply the required torque by the service factor.
Use the Part Number Builder (below the ordering table) to find additional models
Rated 5 out of
5
by
domdamato from
you gotta buy this reducer
I purchased the reducer because of the price, but the unit is comparable to any of the much higher priced ones. I am very happy with this product.
Date published: 2016-02-15
What is that output shaft diameter of this item?
Here is a link for the dimensional drawing for this item: https://www.worldwideelectric.net/product-files/pdfs/HdRS133--L.pdf
Date published: 2020-04-14