text.skipToContent text.skipToNavigation

General Purpose Current I/P or Voltage E/P to Pressure Converter

0 to 5 Vdc, 3 to 15 psi

C$508.02

Article# EP211-X15-5V

Remises de volume disponibles
Calendrier de remise sur volume
Quantité Prix unitaire
1-9 C$508.02
10-24 C$482.62
25-49 C$472.46
50-99 C$452.14
100-199 C$441.98
200+ C$431.82

En stock

Délai de livraison (si pas en stock): 6 semaines
0 to 5 Vdc, 3 to 15 psi EP211-X15-5V EP211-X15-5V
  • Low Cost
  • Built-in Volume Booster
  • Small Size
  • Field Reversible
  • Low Air Consumption
  • Mounts at Any Angle
  • Convenient External Span and Zero Adjustment
    (Except for Explosion Proof Models)
  • Wide Supply Pressure Range
  • Low Supply Pressure Sensitivity
  • Loop Powered

EP211-X15-5V Options de modèles

Voir tous les modèles

Modifiez ces spécifications pour commander un modèle différente. Toutes les combinaisons ne sont pas valides. Les options compatibles avec les sélections précédentes seront en gras.

*Les options en surbrillance ne sont pas compatibles. Veuillez sélectionner une combinaison différente.

Output Range
Input Signal
Features
Connection
Pressure Port Type
Pressure Port Size
Accuracy


Description

The IP211/EP211 Series transducer is an electropneumatic device that reduces a supply pressure to a regulated output pressure directly proportional to an electrical input signal. The 211 Series accepts a wide range of supply pressures, ranging from a minimum of 3 psig (0.2 BAR) above the maximum output up to 100 psig (6.9 BAR). An integral pneumatic volume booster is included in the design to provide high flow capacity (up to 12 SCFM). Model selection includes General Purpose, FM Intrinsically Safe, and CSA Intrinsically Safe.

Mounting
These transducers can be pipe, panel, or bracket mounted in any position. Positions other than verticle will require recalibration of the zero adjustment. For maximum output stability the transducers should be mounted in a vibration free location or such that vibration is isolated in the X and Z axis.

Field Reversible
All transducers are calibrated at the factory for direct acting operation but may be used in the reverse acting mode by reversing the polarity of the signal leads and recalibrating. When recalibrated for reverse acting applications, the transducers provide a minimum of their full rated output pressure (i.e.15, 27, or 30 psig) upon input signal failure.
loading all models
loading all reviews
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getReviews, 0ms
  • REVIEWS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
loading all QA
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
Accessories
30 m (100') spool of 4 conductor wire
C$64.77
11 In Stock
fr-CA
fr
Enregistrer la configuration