text.skipToContent text.skipToNavigation

High Capacity Tension Link Load Cells

C$1,335.00

Article# LC712-50K

Remises de volume disponibles
Calendrier de remise sur volume
Quantité Prix unitaire
1-4 C$1,335.00
5-9 C$1,268.25
10-24 C$1,241.55
25-49 C$1,188.15
50-99 C$1,161.45
100+ C$1,134.75

En stock

Délai de livraison (si pas en stock): 6 semaines

High Capacity Tension Link Load Cells LC712-50K LC712-50K
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getAggregateRating, 1ms
  • REVIEWS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
  • Male to Male Thread Connection
  • 5 Point NIST Traceable Calibration with
    59 kOhm Shunt Cal Data
  • All Stainless Steel Construction
  • Accuracy 0.15%
  • Heavy Duty Construction for High Capacity Loads

Modifier les options

Voir tous les modèles

Toutes les combinaisons ne sont pas valides. Les options compatibles avec les sélections précédentes seront en gras.

*Les options en surbrillance ne sont pas compatibles. Veuillez sélectionner une combinaison différente.

Weight Capacity
Measurement Units
Force direction
Linearity
Electrical Output (nominal)
OD
Height
Connection Type
Cable Length


Spécifications du produit

  • Hystérèse ±0.10% FSO
  • Résistance d'entrée 350 Ω
  • Valeur de précision 0.1
  • La linéarité ±0.10% FSO
  • Matériau de la cellule de charge Stainless Steel
  • Température ambiante maximale 121 {C} (250 {F})
  • Température de compensation maximale 71 {C} (160 {F})
  • Type de mesure Load
  • Température de compensation minimale 16 {C} (60 {F})
  • Répétabilité ±0.05% FSO
  • Surcharge protège 150% of Capacity
  • Surcharge ultime 300% of Capacity
  • Effets de la température Zero: ±0.009% FSO/°C (±0.005% FSO/°F)
  • Balance zéro ±1.0% FSO
  • Style Tension Link

OMEGA’s LC702 Series Tension Links have a 6 ft (2 m) cable, and the LC712 Series have an integral connector. Both series are all stainless steel high capacity in-line tension load cells, for applications including cables on cranes, support rods in architectural designs, engine test beds, and industrial weighing applications.

SPECIFICATIONS
Output: 2 mV/V ±0.25 % FSO
Excitation: 10 Vdc (15V max)
Linearity: ±0.10% FSO
Hysteresis: ±0.10% FSO
Repeatability: ±0.05% FSO
Zero Balance: ±1.0% FSO
Operating Temp Range: -34 to 121°C (-30 to 250°F)
Compensated Temp Range: 16 to 71°C (60 to 160°F)
Thermal Effects:
   Zero: ±0.009% FSO/°C (±0.005% FSO/°F)
   Span: ±0.009% FSO/°C (±0.005% FSO/°F)
Safe Overload: 150% of capacity
Ultimate Overload: 300% of capacity
Bridge Resistance: 350 ?
Construction: Stainless steel
Electrical:
   LC702: 1.8 m (6') 4-conductor cable
   LC712: DT02H-10-6P (or equiv.)
Protection Class: IP67
LC712 Mating Connector: PT06F10-6S, sold separately

  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getReviews, 0ms
  • REVIEWS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;

What would be a typical signal to noise ratio using load cells LC101 and LC 702?

Asked by: Dave135
Thank you for your question, this is very dependent on the particular application but if only talking about load cells the LC101 is little better than LC702 because LC101 output sensitivity is 3, and the LC702’s output sensitivity is 2mV/V. 3 to same noise ratio is bigger than 2, but not much different. If want to reduce the noise ratio, the best way is to use load with built-in amplifier which will increases output over noise, additionally we would recommend the use of short cables.
Answered by: Pressure Engineer
Date published: 2020-04-02
  • y_2020, m_7, d_6, h_15CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.10
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_1
  • loc_en_CA, sid_LC712-50K, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_omega
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 1ms
  • QUESTIONS, PRODUCT
Accessories
15 foot connector/cable assembly for LC716 series
C$152.00
15 In Stock
Mating connector for LC412/LCM412 models
C$39.00
374 In Stock
Accessories and Compatible Meters
4-Digit strain meter with excitation
C$415.00
25 In Stock
6-Digit strain meter with excitation
C$890.00
14 In Stock

fr-CA
fr
Enregistrer la configuration