PST rejoint DwyerOmega. En savoir plus>
Embases pour connecteurs miniatures pour thermocouples de -29 à 180 °C (-20 à 356 °F)
Miniature Panel Jacks
Remises de volume disponibles
Calendrier de remise sur volume
| Quantité | Prix unitaire |
|---|---|
| 1-9 | C$12.07 |
| 10-24 | C$11.83 |
| 25-99 | C$10.74 |
| 100-499 | C$10.14 |
| 500-999 | C$9.54 |
| 1000+ | C$8.93 |
Ajouté à votre panier
Configuration terminée.
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Échec de l'enregistrement des configurations, cliquez sur le bouton Configurer Recommencer
- Taille compacte
- Acceptent les connecteurs mâles miniatures d'OMEGA mais également ceux de l'industrie
- Vis de terminaison accessibles
- Clip à ressort d'utilisation facile
- Etiquettes numérotées d'identification inclus
MPJ-C-F Options de modèles
Voir tous les modèlesModifiez ces spécifications pour commander un modèle différente. Toutes les combinaisons ne sont pas valides. Les options compatibles avec les sélections précédentes seront en gras.
*Les options en surbrillance ne sont pas compatibles. Veuillez sélectionner une combinaison différente.
Panel Length
Panel Height
Thermocouple Type
Features
Color Code Standard
Number of Connector Rows
Connector Type
Number of Junction Box Positions
Description
Le connecteur de panneau MPJ miniature prend moins de la moitié de la surface de panneau nécessaire pour la version taille standard. Un simple clip à pousser est nécessaire pour maintenir le connecteur dans une découpe rectangulaire. Les vis de terminaison inclinées permettent d'effectuer le câblage après l'assemblage du panneau.DIMENSIONS DE MONTAGE
8,1 x 16,7 mm
Découpe nécessaire
14,3 mm
Distance horizontale centre à centre
23,8 mm
Intervalle vertical minimum entre lignes
Pour obtenir les caractéristiques complètes de ces produits, cliquez sur le lien au bas de cette page.
- Taille compacte
- Acceptent les connecteurs mâles miniatures d'OMEGA mais également ceux de l'industrie
- Vis de terminaison accessibles
- Clip à ressort d'utilisation facile
- Etiquettes numérotées d'identification inclus
Rated 4 out of
5
by
AMP236 from
What we needed
This is just what we needed for the project to be completed.
Date published: 2016-02-29
Rated 3 out of
5
by
Ho Truong from
Thermocouple connector.
Clip holder too weak. Should not sell this clip holder to customer...
Date published: 2017-05-24
Rated 5 out of
5
by
Hannah from
They fit and work just how you would expect
no issues installing and have used in the past with no problems
Date published: 2024-08-19
Rated 5 out of
5
by
Jerry Gaffney from
These work great.
These work great. Easy to install. Fast delivery.
Date published: 2023-05-24
Rated 5 out of
5
by
Compounding from
Review
Good quality and fit as expected. Would recommended and buy again.
Date published: 2022-01-14
Rated 4 out of
5
by
Dkrug from
Jack works great!
Jack works great. I would recommend reducing the size of the cut-out in order to better stabilize the jack when installed. Otherwise it's loose and sloppy.
Date published: 2020-07-08
Rated 4 out of
5
by
rosa2017 from
always great parts to order
Been ordering panels & thermo-couples from Omega for a long time . Great place and always in time
Date published: 2017-11-07
Rated 5 out of
5
by
Jamesca from
Exactly what I expected
It's really hard to write a bad review about anything I've ever purchased from Omega because everything is built with quality
Date published: 2017-07-11
Hi. I am interested in a 19MJP1-20-(*) with copper connections. What would be the correct part number. Thank you.
Thank you for your inquiry. Use 19MJP1-20-U.
Date published: 2024-08-19
Hello OMEGA, Do you sell a board on which the MPJ-T-F sit (as it shown on the data sheet)?
Thank you for your inquiry. The part number for the aluminum panel is MJP1-06-BLANK https://www.omega.com/en-us/temperature-measurement/temperature-connectors-panels-and-block-assemblies/panel-connectors-and-assemblies/mjp/p/MJP1-06-BLANK
Date published: 2023-01-10
Hi We are using the Miniature Panel Jacket omega PN MPJ-K-F, do you have some assembly instructions for it?, which is the recommended torque for the screws?
Thank you for the question regarding the MPJ- series jack panels. Unfortunately, we do not have a formal installation procedure for these and or recommended torque figures for the screws. A basic installation recommendation for the panel screws can be found on the MJP data sheet here: https://assets.omega.com/pdf/connectors/jack-panel-assemblies/panel-jack-assemblies/MJP.pdf . This is the recommended set up for installation of the panel itself. The jacks themselves are a clip-in connector and are clipped in by pushing them into the same side as the mounting screws. If using a snap-strip, simple hand-tightening is adequate for the snap-strip into the connectors. Similarly, hand-tightening all the connector screws is adequate and recommended. Our apologies, there are no specific maximum torque ratings for these screws.
Date published: 2023-03-22
what is the difference between MPJ-K-F and MPJ-KI-F? I dont see any difference on the product specs.
Thank you for your inquiry. MPJ-KI-F conforms to European IEC color code (green) and MPJ-K-F follows ANSI color code (yellow).
Date published: 2020-10-06
MPJ-K-F are these UL Listed components?
Thank you for your inquiry Mike77. The MPJ series connectors are not UL listed.
Date published: 2022-05-13
DOES THE PANEL JACK COME WITH THE FEMALE CONNECTORS OR ARE THEY SOLD SEPARATELY?
Thank you for the inquiry. MPJ-K-F is the female connector. If you want to order panel and female connectors as a set please refer to following link;
https://www.omega.com/en-us/sensors-and-sensing-equipment/sensing-accessories/jack-panel-assemblies/p/MJP
Best regards
OMEGA
Date published: 2022-01-19
Is it possible to get a CAD model of this connector?
Thank you for the inquiry. We do not offer CAD model unfortunately. For more details on dimensions please forward request to TEMP@OMEGA.COM.
Best regards
OMEGA
Date published: 2023-04-20
What is the maximum panel thickness these are compatible with?
The panel for this connector when using the spring clip should be at least .090 INCHES thick which is our standard panel thickness for MPJ Jack Panels. The max panel thickness allowed is 0.187 INCHES.
Date published: 2024-08-19
Accessories