Appelez-nous au 1-888-826-6342
Connecteurs multicontact pour thermocouples
Multipin Thermocouple Connectors Air and Moisture Resistant
Remises de volume disponibles
Calendrier de remise sur volume
Quantité | Prix unitaire |
---|---|
1-9 | C$166.85 |
10-49 | C$158.51 |
50-99 | C$150.17 |
100-999 | C$141.82 |
1000-4999 | C$133.48 |
5000+ | C$125.14 |
Ajouté à votre panier
Configuration terminée.
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Échec de l'enregistrement des configurations, cliquez sur le bouton Configurer Recommencer
- Contacts en alliage thermoélectrique
- Connexion résistant à l'air et à l'humidité
- Contacts à sertir amovibles
- Pour fils torsadés de Ø 0,5 à 0,8 mm
- Corps en aluminium
- Finition anodisée noire
- Bague de raccordement à vis
MTC-12-FC Options de modèles
Voir tous les modèlesModifiez ces spécifications pour commander un modèle différente. Toutes les combinaisons ne sont pas valides. Les options compatibles avec les sélections précédentes seront en gras.
*Les options en surbrillance ne sont pas compatibles. Veuillez sélectionner une combinaison différente.
Connector Gender
No. of Pins/Sockets
Additional Features
Sensing Type
Connector Style
Temperature Unit
Temperature Min
Temperature Max
Temperature Range
Description
Les connecteurs multicontact d'OMEGA permettent de relier facilement des câbles à plusieurs thermocouples et de réaliser des connexions et déconnexions instantanées de plusieurs capteurs. Lorsqu'il est utilisé avec des contacts de la série MTC, ce type de connecteur met en oeuvre une combinaison d'isolants diélectriques sans espace vide et qui empêchent la circulation de l'air et la présence d'humidité dans le connecteur. Ces connecteurs supportent des températures jusqu'à 200°C, ce qui prolonge à leur durée de vie. Ils sont équipés de serre-câble qui assurent à l'ensemble connecteur et câbles une excellente résistance aux torsions et aux tractions.Les prix des modèles les plus courants sont donnés dans le tableau "Pour commander". Utilisez la table de "Construction d'une référence" ci-dessous pour obtenir les prix de tous les modèles disponibles.
Pour obtenir les caractéristiques complètes de ces produits, cliquez sur le lien au bas de cette page.


Rated 3 out of
5
by
Anonymous from
Could be 5 stars BUT...
I like these connectors. They do what they are supposed to. But, trying to figure out what you need is difficult. It would be better if you offered a preconfigured kit with all you need. And, this stuff is too expensive.
Date published: 2020-09-24
Rated 5 out of
5
by
B Millington from
Multipin Thermocouple Connectors
Great product will buy again and come back for other needs from Omega
Date published: 2022-03-13

Can these be configurable so the "pin" can either male or female in the connector housing?
Sorry, no.Cannot be configured as universal. Male or Female.
Date published: 2020-03-25
Do these connectors come with pins or are they sold separate?
Thank you for connecting with Omega.
The pins and sockets for the MTC series connectors are sold separate.
Each pin and socket is made with thermocouple specific metals to match the wire.
Date published: 2022-04-27
Crimp tool MTC-CT does this have a mil spec equivalent?
Omega does not sell a MIL version of the crimp tool for the MTC product and does not have knowledge of one exists.
Date published: 2021-05-12
What is the Ingress Protection of this connector?
Thank you for your inquiry. This series connector does not carry any IP ratings.
Date published: 2020-12-16
Hi, Would it be possible to connect 10 K-type thermocouples to one of the 24 pin models? would this cause any significant difference in the measured temperature from the sensor?
Hi MattH99
Thank you for the inquiry. The 10 K thermocouples will occupy 20 of the 24 ports. That is fine. Empty ports will not affect the occupied ports.
Best regards,
OMEGA
Date published: 2023-02-12
What is the maximum cable diameter for MTC-24SHL and MTC-24SHLA?
Thank you for your inquiry Jozef. The MTC-24-SHL and the MTC-24-SHL-A accepts 20-24 gage wire. If you have any other questions, please do not hesitate to contact us directly at 1-800-622-2378, ask for Temperature Engineering or temp@omega.com.
Date published: 2022-03-09
What is the criteria used to validate the MTC-CT crimping tool? Is there a pull test limit or crimp indent location range verification? If the crimp indent is not centered between the inspection hole and the bell mouth of the contact is this acceptable?
Thank you for your inquiry Crimpy. Due to the complexity of your question, please send an email to temp@omega.com and one of our engineers will assist you in finding this information.
Date published: 2022-09-29
Some of these connectors had yellow bands and some have red bands. Some have a darker sealing material and other with a lighter red-orange color. Is there a significants to the difference in colors? Will this work with the same contact?
Thank you for the inquiry. There is no significance to the different colors. They work with the same contacts HPC and MTC series;
https://assets.omega.com/pdf/connectors/thermocouple-and-rtd-connectors/HPC_CONTACTS.pdf
https://assets.omega.com/pdf/connectors/thermocouple-and-rtd-connectors/MTC.pdf
Best regards
OMEGA
Date published: 2022-07-27
Multipin Thermocouple Connectors Air and Moisture Resistant
C$1.96
0 In Stock