Appelez-nous au 1-888-826-6342
Connecteurs Miniatures Thermocouple, avec 2 Broches Plates et Serre-câble - 29 à 180 °C
Miniature Size Thermocouple Connectors
Remises de volume disponibles
Calendrier de remise sur volume
Quantité | Prix unitaire |
---|---|
1-9 | C$12.15 |
10-49 | C$11.06 |
50-99 | C$10.45 |
100-999 | C$9.96 |
1000-4999 | C$9.36 |
5000+ | C$8.75 |
Ajouté à votre panier
Configuration terminée.
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Échec de l'enregistrement des configurations, cliquez sur le bouton Configurer Recommencer
- Connecteur thermocouple ultime
- Capot et serre-câble intégral
- Nouveau design, montage de serre câble facile et rapide
- Accepte une large gamme de calibre de fils
- Rondelles de contact pour une connexion rapide
- Fenêtre de marquage pour identification du capteur
- Vis imperdables à tête à double encoche (cruciforme/ panne plate)
- Nylon chargé de verre Plage - 29 à 180 °C
SMPW-CC-KI-F-NL Options de modèles
Voir tous les modèlesModifiez ces spécifications pour commander un modèle différente. Toutes les combinaisons ne sont pas valides. Les options compatibles avec les sélections précédentes seront en gras.
*Les options en surbrillance ne sont pas compatibles. Veuillez sélectionner une combinaison différente.
Sensing Type
Thermocouple Calibration Type
Connector Gender
Calibration Standard
Additional Features
Connector Style
Temperature Unit
Temperature Min
Temperature Max
Temperature Range
No. of Pins/Sockets
Description
Les connecteurs standards SMPW disposent de deux broches plates et fournissent un raccordement entre les capteurs thermocouple et les instruments de mesure de température ou les contrôleurs de processus. Les connecteurs SMPW sont compatibles avec les connecteurs mâles à deux broches, (d'une taille similaire) ou avec un connecteur femelle deux pôles.Ces connecteurs ultimes SMPW-CC proposent un raccordement rapide et facile de câble ou de fil thermocouple par un ensemble de serrage. Le capot/serre-câble contient les 4 vis imperdables et élimine le problème des vis desserrées. Une plaque métallique et des oiellets sont inclus.
L'outil de montage # SMP-CC-TOOL est conçu pour effectuer un raccordement rapide et fiable entre connecteurs OSTW-CC et des fils thermocouple ou des câbles.
SMP-CC-TOOL
Rated 5 out of
5
by
Fran89 from
Just good connectors.
Very good connector with all the bits required to use it included.
Date published: 2020-07-02
Rated 5 out of
5
by
Anonymous from
Excellent product
exactly what I was looking for and exactly what I received. Quick and fast shipping.
Date published: 2020-06-04
Rated 5 out of
5
by
Micro tan from
Easy termination
High quality. easily assembled im one handed due to a stroke and was able to assemble these using a vice to hold the connector
Date published: 2019-04-03
Rated 5 out of
5
by
oneof4 from
Excellent strain relief
I love how the strain relief feature of these connectors help to take the stress off of the wire where it connects. Most of our wire breaks occur inside the connectors at the screw terminals so these connectors should help.
Date published: 2019-02-16
Rated 5 out of
5
by
Jocker from
Omega top source for TC parts
I have used Omega as a source for years and still my top supplier for TC parts. Bought all our parts from Omega to build out lab TC adapters. High quality pieces
that ensure our calibrations will be accurate.
Date published: 2018-10-17
Rated 4 out of
5
by
shreib from
good design
Worked like it should but many tiny parts and no instructions included for assembly. Finally figured it out but not sure about exact location in assembly of washer, wire, screw . . . put wire under the washer.
Date published: 2018-01-29
Rated 5 out of
5
by
Jimbobla from
Quality product
Just installed. Great product. Well constructed. Would buy again.
Date published: 2018-01-23
Rated 4 out of
5
by
Dr C from
Timely
Bought SMP Connectors, thermocouple wire and thermocouple recorder
Date published: 2017-11-27
Rated 5 out of
5
by
Rolling star from
Replace broken connectors
I purchase these parts for repair electronic testers
Date published: 2017-10-13
Rated 5 out of
5
by
Marwen64 from
As expected
I was looking for quite some time to find these, and these are even better than expected.
Date published: 2017-08-22
Rated 5 out of
5
by
Pmhpaddle from
Very good
Good product simple to use and quality materials aand workmanship
Date published: 2017-02-24
Rated 5 out of
5
by
Big Ric from
Dependable
Being in the Military and Government Contract Business I must use dependable products when measuring and testing. Omega Products have always been there.
Date published: 2016-12-06
Rated 5 out of
5
by
stainedglass from
its the little things
I've worked with too many mini connectors that strip when you tighten the screws or that don't have any type of barrier to prevent accidental shorting. For the extra 2 pennies/thousand get a good connector. My clumsy mitts sure appreciate the strain relief for grabbing the jack also.
Date published: 2016-11-28
Rated 4 out of
5
by
Tech64 from
Great product
Reviewed this product many times in the past years.
Date published: 2016-09-14
Rated 5 out of
5
by
tonythewonderful from
Ingenious
I needed something better than the standard, "no-name" connectors that came with my logger.
These Omega connectors are light years better. Very easy to install, perfect contact, no glitches, I just forgot they are there. And how convenient that small white pad on the connector to write which TC it is!
Date published: 2016-09-11
Rated 5 out of
5
by
dick from
works
These are well made . Work exactly like they are supposed to.
Date published: 2016-07-08
Rated 5 out of
5
by
Mandoman from
Omega Quality
Like most everything that comes from OMEGA the mini-connectors are first rate.
Date published: 2016-05-28