Appelez-nous au 1-888-826-6342
High Temperature Surface Probe with Handle and Retractable Cable. Model Numbers HPS-HT-(*)-12-SMP-M
High Temperature Surface Thermocouple Probe with Handle and Retractable Cable
Remises de volume disponibles
Calendrier de remise sur volume
Quantité | Prix unitaire |
---|---|
1-9 | C$308.92 |
10-24 | C$293.47 |
25-99 | C$278.03 |
100-499 | C$262.58 |
500-999 | C$247.14 |
1000+ | C$231.69 |
Ajouté à votre panier
Configuration terminée.
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Échec de l'enregistrement des configurations, cliquez sur le bouton Configurer Recommencer
- Type K, E, or J Thermocouple Calibrations
- Type K Measures Temperature up to 1100°C (2000°F)
- SMP Miniature Male Connector Termination on End of Retractile Cord
- 12 In. Probe is Standard. Other Lengths Available.
HPS-HT-J-12-SMP-M Options de modèles
Voir tous les modèlesModifiez ces spécifications pour commander un modèle différente. Toutes les combinaisons ne sont pas valides. Les options compatibles avec les sélections précédentes seront en gras.
*Les options en surbrillance ne sont pas compatibles. Veuillez sélectionner une combinaison différente.
Thermocouple Type
Process Temperature Max
Process Temperature Range
Probe Length
Category
Process Temperature Unit
Process Temperature Min
Sensor Application
Junction Type
Probe Diameter
Sheath Housing Material
Cable Insulation
Wire Gauge
Cable Length
Termination Connection Type
OMEGA’s High Temperature Surface Probe features a thermocouple alloy spring-loaded sensing element to ensure consistent readings. The twelve-inch probe comes with an SMP Male Connector termination and a 0.3 mm (1 ft.) retractable sensor cable (stretches to 1.5 m (5 ft.). Available in thermocouple types J, K, or E, the HPS-HT probe can measure temperatures up to 1100°C (2000°F), type K only.
SPECIFICATIONS
Maximum Short-Term Temperature Rating:
Type K: 1100°C (2000°F)
Type E: 870°C (1600°F)
Type J: 760°C (1400°F)
Maximum Handle Temperature: 70°C (160°F)
Length: 300 mm (12") (custom lengths available)
Cable: 300 mm (1') retractable, stretches to 1.5 m (5'); miniature thermocouple (SMPW) connector
SPECIFICATIONS
Maximum Short-Term Temperature Rating:
Type K: 1100°C (2000°F)
Type E: 870°C (1600°F)
Type J: 760°C (1400°F)
Maximum Handle Temperature: 70°C (160°F)
Length: 300 mm (12") (custom lengths available)
Cable: 300 mm (1') retractable, stretches to 1.5 m (5'); miniature thermocouple (SMPW) connector
Rated 2 out of
5
by
frechem from
Didn't last long.
The coil broke after just a few uses. Sent it back for repair and was told it wouldn't be able to be repaired and there is no warranty. I was offered a 10% discount to buy a new one.
Date published: 2016-03-03
Rated 5 out of
5
by
Gerry from
Easy to use and comfortable! Omega does it again!!
Easy to use and comfortable! Omega does it again!!
Date published: 2023-03-30
What is the Accuracy of this probe model type K HPS-HT-K12SMP-M ?
For Temperatures above 0°C; ±2.2°C or ±0.75% of the actual value (use the greater of the two tolerances)
For Temperatures below 0°C; ±2.2°C or ±2.0% of the actual value (use the greater of the two tolerances)
Date published: 2020-06-17
What is the Accuracy of these units?
The HPS-HT probes would adhere to the Standard Limits of Error specification with the orientation of the probe to the surface being extremely important to meet the specification
Date published: 2020-06-17
Question regarding the correct means of using the probe. Is it required to merely rest the probe tips on the surface, while ensuring full contact. Or must downwards pressure be exerted to the point where the outer sheath contacts this surface also?
Thank you for your inquiry. The HPS-HT Series surface probe has a spring-loaded sensing element where you basically apply some gentle pressure on the tip of the probe to get a temperature reading.
Date published: 2024-02-28