Appelez-nous au 1-888-826-6342
Sondes Thermocouple à Isolant Minéral, diamètres 1,5 à 6mm, Poignée Moulée et Câble Spiralé
T Type Penetration Probe, Grounded, 304 Stainless Steel, 0.250 in Diameter, 24 in Length, Retractable Cable
Remises de volume disponibles
Calendrier de remise sur volume
| Quantité | Prix unitaire |
|---|---|
| 1-9 | C$188.66 |
| 10-24 | C$179.23 |
| 25-99 | C$169.79 |
| 100-499 | C$160.36 |
| 500-999 | C$150.93 |
| 1000+ | C$141.50 |
Ajouté à votre panier
Configuration terminée.
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Échec de l'enregistrement des configurations, cliquez sur le bouton Configurer Recommencer
- Fabrication - câble de tolérances de class 1 à isolant minéral (MI)
- Sondes testée- les sondes sont testées individuellement pour la pression et l'isolation
- Poignée moulée utilisable jusqu'à 220°C
- Câble spiralé- extensible à 1,5m
- Connecteur miniature pour thermocouple - pour l'usage avec les instruments de mesure portatifs
- Longueurs standards 150, 300, et 600mm, les longueurs personnalisés sont disponibles
- Sondes au point aiguille ou avec une tête à circulation d'air, en option
- Sonde RTD, Type PR-16 disponible, Cliquez ici pour plus d'informations
THSS-14G-RSC-24-NP-CL5 Options de modèles
Voir tous les modèlesModifiez ces spécifications pour commander un modèle différente. Toutes les combinaisons ne sont pas valides. Les options compatibles avec les sélections précédentes seront en gras.
* Les options en surbrillance ne sont pas compatibles. Veuillez sélectionner une combinaison différente ou cliquez sur le bouton CONFIGURER pour créer la vôtre.
Thermocouple Type
Process Temperature Max
Process Temperature Range
Sensor Appliaction
Junction Type
Probe Diameter
Sheath Housing Material
Probe Length
Cable Insulation
Wire Gauge
Cable Length
Termination Connection Type
Color Code Standard
Additional Feature
Cable Type
Category
Process Temperature Unit
Process Temperature Min
Description
Les sondes thermocouples portatives OMEGA™ disposent d'une poignée moulée à la gaine de la sonde. Ils comprennent également un câble spiralé (extensible à 1,5m) et connecteur miniature. Le câble et le connecteur sont de code couleur suivant le type de thermocouple. Les gaines des sondes sont frabriquées à partir du câble à isolant minéral (MI) de tolérance de la Class 1, qui peut être déformée pour répondre à de nombreuses applications. Les gaines sont utilisables jusqu'à : 800ºC pour acier inox; 1150 ºC pour Inconel et 1335ºC pour SuperOMEGACLAD™XL pour l'usage à courte terme.
Cliquez ici pour vous informer comment choisir le type de soudure chaud.
Rated 4 out of
5
by
Jackson from
Very durable
We have been using this product for several years; it is durable, lightweight, and easy to use.
Date published: 2016-02-15
Rated 5 out of
5
by
Donna Phillips from
Purchaser
The product came in as calibrated which is very convenient for the shop. It gets their job done sooner and so far, there is nothing wrong with it. It was received in a very good condition. Much recommended to purchase this part.
Date published: 2024-08-12
Rated 5 out of
5
by
Meggitt Aerospace from
Very happy with the product.
The item and pictures are true to the description.
Date published: 2023-02-21
Rated 5 out of
5
by
Flor from
Thermocouple Handle Probes
Amazing unit. I am always coming back.
they are durable and very efficient
Date published: 2022-10-05
Rated 4 out of
5
by
ChristopherY from
Works
I wanted a longer probe but they aren't in stock. I had to settle for this one, it works fine.
Date published: 2022-09-05
Rated 5 out of
5
by
LFG Solutions from
Awesome Two Foot Type K Thermocouple Probes!
The probes look fantastic and seem to be well manufactured. I'll be calibrating them later this week to confirm the accuracy and functionality. I expect that they will perform exceptionally well.
Date published: 2021-08-09
Rated 3 out of
5
by
Stack Testing from
Durable, reliable, do the job. Longer ones less so
Durable and get the job done. Only complaint is longer (36"?) ones come with a set screw to hold the probe in place, in little time this loosens and the probe spins freely on the handle. Causes failure. Set screw is so small that it strips out if you try to tighten. Shorter ones are molded right into the handle...
Date published: 2021-02-05
Rated 4 out of
5
by
Tamzin from
Good probe, slow ship
Good quality on the product, usually the company takes a while to ship
Date published: 2021-01-03
What are the response times for 1/16" and 1/8" diameter Inconel probe with extended tip. I need to measure the temperature of a Bunsen burner flame, up to 1550 degC; do you recommend this probe or something else?
Thank you for your inquiry Probing for Answers. Unfortunately, we do not have the exact response times for a specific diameter due to environmental conditions and the thermocouple junction type affecting the response of the probe. We can share that the smaller the diameter of the probe, the faster the response time. But a smaller diameter will also reduce your maximum temperature. If you want the fastest response time on a thermocouple, then selecting a grounded probe will be a good choice as it provides a faster time response than an ungrounded junction. If you have any other questions, please feel free to call us at 1-800-622-2378, ask for Temperature Engineering or send an email to temp@omega.com
Date published: 2022-03-26
What is the temperature rating of the coiled cord and connector?
Hello,
Thank you for your question.
The temperature rating for the cord is -267C to 260C (-450F to 500F) and the temperature rating for the connector is from -29C to 260C (-20F to 500°F)
Date published: 2020-03-25
What is the accuracy of this probe (KHSS-116 G-RSC-12) in F?
Thank you for connecting with Omega. The accuracy of this probe would be based off ANSI standards of a type K thermocouple. In this case accuracy is +/- 2.0F or 0.4%, whichever is greatest.
Date published: 2022-01-13
What is the accuracy of the KHSS-116G-RSC-12?
Thank you for your inquiry. The tolerance is ±1.1°C or 0.4% of the actual value (use the greater of the two) .
Date published: 2022-01-12
Is this probe good for -200 deg C when used with the HH12C thermometer?
Thanks for the question! Type K thermocouples are rated for -200C although Omega only tests down to 0C.
Date published: 2020-07-28
I have a KTSS-HH Thermocouple probe 6”, 0.125”, stainless steel , TSS-HH series . It is just a bit too short for my need. Do you sell 12’ long one in the same model? Could you please email me the exact link of that model form me so I can purchase it?
Hi Krisztina, Please see the attached link. The part number you are going to also want is KTSS-HH-12. https://www.omega.com/en-us/sensors-and-sensing-equipment/temperature/sensors/thermocouple-probes/jtss-hh-series/p/KTSS-HH-12
Date published: 2020-08-17
Would I be able to measure the temperature of a live circuit with this? My process uses an electrical current to heat up a resistor to slit our product with and I want to use this to measure that temperature.
Omega does not advise using any probes on live circuits and recommends only non-contact measurement like IR be used.
Date published: 2021-12-22
Can I order a handheld probe (KHXL-18G-RSC-12) with a teflon coating or another type of coated to protect from different chemical?
Thank you for your inquiry. We can place a protective coating on this probe. Request can be sent to temp@omega.com
Date published: 2021-06-04