Appelez-nous au 1-888-826-6342
Hermetically Sealed Thermistor Sensors
Hermetically Sealed Flexible Thermistor Sensors PFA Jacketed
Remises de volume disponibles
Calendrier de remise sur volume
| Quantité | Prix unitaire |
|---|---|
| 1-9 | C$109.50 |
| 10-24 | C$104.03 |
| 25-99 | C$98.55 |
| 100-499 | C$93.08 |
| 500-999 | C$87.60 |
| 1000+ | C$82.13 |
Ajouté à votre panier
Configuration terminée.
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Échec de l'enregistrement des configurations, cliquez sur le bouton Configurer Recommencer
- Available in 3 Standard Resistance Values: 2252 Ohms, 5000 Ohms or 10,000 Ohms at 25°C.
- Interchangeability: ±0.1°C Between 0 and 70°C.
- Temperature Range -80 to 150°C (-110 to 302°F)
- Available in Standard Lengths of 40, 80 and 120 Inches (1, 2 and 3 Meters).
HSTH-44031-40 Options de modèles
Voir tous les modèlesModifiez ces spécifications pour commander un modèle différente. Toutes les combinaisons ne sont pas valides. Les options compatibles avec les sélections précédentes seront en gras.
*Les options en surbrillance ne sont pas compatibles. Veuillez sélectionner une combinaison différente.
Nominal Resistance
Cable Length
Termination Connection Type
Additional Feature
Category
Sensor Type
The HSTH Series Flexible Thermistor Sensors are hermetically sealed at the sensor tip to provide continuous protection from corrosive environments. This unique Thermistor temperature probe design provides a small, flexible, and electrically isolated Thermistor element, suited to a variety of applications. The HSTH Series is available in three resistance values: 2252Ω, 5000Ω and 10000Ω.
If you need higher operating temperatures, see our RTD Version or Thermocouple Version which may be a better fit for your application.
Rated 1 out of
5
by
Joe p from
Very disappointing!
Quality control and customer service needs improvement! I ordered 6 and only got 3 that worked. I sent the 3 bad ones back, and after months of waiting for the sensors that I needed months ago, I finally received 2 good ones and 1 bad one. I will not be using Omega again. Very disappointing!!!
Date published: 2020-05-26
Rated 4 out of
5
by
Anonymous from
Precise Temperature Control
Fairly accurate, but tip is delicate and you cannot bend it too much otherwise the internal thermistor breaks.
Date published: 2020-09-29
Rated 1 out of
5
by
Joe p from
Need to improve quality control
This sensor is great when you get one that works. I ordered 6 and 3 didn't work. No prob I contacted Omega and they said send it back and we will send you new ones. After months of waiting they sent me 3 replacement sensors. Only two of those 3 sensors actually worked. I will not be using Omega for my futher needs.
Date published: 2020-05-26
Rated 5 out of
5
by
Loureiro58 from
Great product
Your tech suport is very helpful!
Thank you very much !
Date published: 2017-12-31
Is this a NTC(negative temperature coefficient) thermistor?
Thank you for your email . The HSTH-44031-120 uses a NTC thermistor which
drops in resistance with increase temperature . The Thermistor Resistance vs. Temperature table is found per the attached link
https://www.omega.co.uk/temperature/Z/pdf/z256-257.pdf
Date published: 2020-03-23
what is the diameter of the Item# HSTH-44031-120 probe end? thanks
Product appearance and tip diameter information is available on the Data Sheet (PDF) link on this page. Tip size ranges from 2.3 to 2.5 mm (0.090 to 0.100")
Date published: 2020-04-03