Cette sonde à RTD à usage général passe directement du chemisage au câble de 40 pouces (1 mètre) sans l'utilisation d'une jonction de transition en métal. Ce design permet d'avoir une sonde plus compacte lorsque la limitation de l'espace est un facteur. Veuillez prendre note que l'endroit où le fil sort du chemisage ne sera pas aussi durable que sur la sonde modèle PR-11, qui possède une jonction de transition en métal et un réducteur de tension à ressort.
Pour des options spéciales, veuillez consulter notre département des ventes pour les prix et les disponibilités.
Les prix des modèles les plus courants sont donnés dans le tableau "Pour commander". Utilisez le "Tableau Constructeur de référence" ci-dessous pour déterminer le prix des autres modèles.
Pour obtenir les caractéristiques complètes de ces produits, consultez les "Liens associés - Produits reliés" sous le "Tableau Constructeur de référence".
Rated 3 out of
UC Davis Medical Center from
RTD Probe reviewThe connection point from the probe to the wire is a weak point that has broken a few times. We have repaired and/replaced this probe multiple times. Also the connection to the thermometer has failed as well.
Date published: 2021-03-02
Rated 4 out of
Good for static measurement, response time variesEasy to use, accurate devices. Warning, I saw different response times between the two devices I ordered when the temperature was changing rapidly. One responded to an 80 C difference in ~ 1 min, the other took 5 min to stabilize.
Date published: 2020-07-20
Rated 3 out of
Nice design - Required proprieatay connectorI bought an Omega data logger with 4 thermocouple inputs and 2 RTD connections. The device worked right out of the box - is easy to use and record with. Unfortunately Omega has designed the data logger so that we have to use their proprietary connectors , almost like an earphone jack, for the RTDs. My master technician tried to solder these connects and messed one of them up. Called up Omega. 3 week lead time, and no they would not replace the connector. a Little disappointed on that front. Very limited instructions on how to solder this connector. We guessed as to what terminal goes to what RTD wire and took an educated guess. Lucky for us our guess was right.
Date published: 2018-03-26
Rated 5 out of
Quality and consistent constructionThe large number of configurations of these probes is helpful to find one that is just right for the application.
Date published: 2020-12-07
Rated 2 out of
Todd W from
RTD Bad GroundThe RTD is a three wire unit that appears robust and arrived in the configuration that was ordered. However, when it was connected to the digital controller for the oven, the sensor signal was lost each time the oven reached about 120 F. Tracing the issue revealed that one of the ground wires from the RTD had a bad connection. Just touching the wire as it exited the sensor would cause it to loss connection. The wire was not strained during installation given the generous space afforded by the oven. Since my lead wire is only 6' long, I am not so concerned about the added accuracy a 3-wire RTD offers over a 2-wire. So, I placed a jumper on the controller to connect both of the grounds together. If the lead time for ordering a new RTD was not so long, I would have returned this defective unit.