Appelez-nous au 1-888-826-6342
Sondes thermocouple multipoint
Thermocouple Profile Probes Made from High-Accuracy Special Limits-of-Error Wire (SLE)
Remises de volume disponibles
Calendrier de remise sur volume
Quantité | Prix unitaire |
---|---|
1-9 | C$946.36 |
10-24 | C$899.04 |
25-99 | C$851.72 |
100-499 | C$804.41 |
500-999 | C$757.09 |
1000+ | C$709.77 |
Ajouté à votre panier
Configuration terminée.
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Échec de l'enregistrement des configurations, cliquez sur le bouton Configurer Recommencer
- 3, 6 ou 10 points de mesure
- Longueur : 45 ou 90 cm
- Diamètre 4,8mm
- Type J, K, T et E, classe 1
- Terminaisons aisément identifiables
- Jusqu'à 650°C
PP6-36-T-U-18 Options de modèles
Voir tous les modèlesModifiez ces spécifications pour commander un modèle différente. Toutes les combinaisons ne sont pas valides. Les options compatibles avec les sélections précédentes seront en gras.
*Les options en surbrillance ne sont pas compatibles. Veuillez sélectionner une combinaison différente.
Thermocouple Type
Process Temperature Range
Junction Type
Probe Length
Additional Feature
Category
Sensor Application
Sheath Material
Probe Diameter
Cable Insulation
Wire Gauge
Cable Length
Termination Connection Type
Color Code Standard
Description
Sonde thermocouple est d' une variété de longueurs, des configurations de point. Sélectionnez votre propre espacement entre les points de la température, le nombre de points de mesures, le diamètre, le matériel de gaine de thermocouple.
Rated 4 out of
5
by
Forsmann from
Almost Perfect
I have used two of these for some time. would be nice to get a 24" with 6 TC's at 2" apart readings. Having only the 18" or 36" as choices makes it rough to be very versatile.
Date published: 2016-10-12
How are these calibrated?
Hi Sjay,
Individual probes are checked before assembly. If you require NIST traceable certification, it must be noted part as of initial request.
Best regards,
OMEGA
Date published: 2024-09-25
Is it possible to have this built with 12 sensors?
Thank you for the inquiry. Yes, these can be made with 12 sensors. Probes are not bendable.
Best regards
OMEGA
Date published: 2021-03-06
What is the spacing and thermal isolation of the sensors?
Thank you for your inquiry. 4.5" Spacing between each sensor. No thermal isolation information available.
Date published: 2021-01-30
I would like to get a quote for a custom profile probe by email. What I need to change is the distance between the sensors. Also I would like to know what fitting size for the probe since I'm going to use it in pressurized system. Thank you.
Thank you for your inquiry. Please send your custom profile probe request to temp@omega.com and we will review your requirements and respond accordingly.
Date published: 2021-04-23
Looking at profile probe PP6-36-K-U-18. What is the minimum spacing available between the points? We ideally would like 1/2" spacing, but can also accept 1" spacing. Please advise the minimum spacing available. Thanks
On the PP6-36-K-U-18 sensor spacing is at 1.75" and the PP10 probes would be 1.25" spacing. These are standard probes and any alterations would require it to be a Custom product. You can provide a sketch from the product pages data sheet with all the needed parameters and send it to temperature@omega.com.
Date published: 2022-11-18