Skip to search Skip to main content Skip to navigation

Appelez-nous au 1-888-826-6342

Nous avons remarqué que vous veniez de . Visitez votre site local pour connaître les offres régionales et l'assistance en direct.

Thermocouples à coller Cement-On

Cement-On Surface T/C, Style 1, Type K, 40 in

C$374.03

Article# CO1-K

Remises de volume disponibles
Calendrier de remise sur volume
Quantité Prix unitaire
1-9 C$374.03
10-24 C$355.33
25-49 C$347.85
50-99 C$332.89
100-199 C$325.41
200+ C$317.93

En stock

Délai de livraison (si pas en stock): 13 semaines
Cement-On Surface T/C, Style 1, Type K, 40 in CO1-K CO1-K
  • Temps de réponse de quelques millisecondes
  • Constitués d'une plaquette 13 microns et d'un fil thermocouple de diamètre 0,25mm
  • Très faible inertie thermique
  • Types K, E, J et T
  • Trois types de configuration adaptés aux mesures de surface
  • Longueur des fils: 90cm pour les types 1 et 3, 15cm pour le type 2. Autres longueurs sur demande

CO1-K Options de modèles

Voir tous les modèles

Modifiez ces spécifications pour commander un modèle différente. Toutes les combinaisons ne sont pas valides. Les options compatibles avec les sélections précédentes seront en gras.

*Les options en surbrillance ne sont pas compatibles. Veuillez sélectionner une combinaison différente.

Thermocouple Type
Process Temperature Range
Cable Insulation
Cable Length
Features
Category
Sensor Application
Termination Connection Type
Color Code Standard
Mounting Style
Probe Diameter


Description

Les thermocouples à coller OMEGA sont caractérisés par un temps de réponse rapide. Ils existent en trois configurations conçues spécialement pour les mesures de température de surface. Les types 1 et 2 sont constitués d'une plaquette en alliage thermocouple 13 microns réalisée à partir d'un procédé spécial de fabrication dans lequel la jonction soudée du thermocouple a une épaisseur de 13 microns. Les types 1 et 2 sont plats et ont une inertie thermique très faible; ils sont parfaitement adaptés à la mesure de température de surfaces plates ou incurvées en métal, plastique ou céramique dans tous les cas où un temps de réponse rapide est nécessaire.

Les types 1 et 2 sont fabriqués à partir de fils thermocouples de précision classe 1, de type K, E et T. Les types 1 et 2 ont le temps de réponse le plus rapide: type 1, 10 à 20 millisecondes , type 2:,2 à 5 milliesecondes.

Le type 3 est une version plus abordable réalisée à partir de fils thermocouple de diamètre de 0.25mm à jonction soudée électriquement et de précision classe 1. Leur temps de réponse est d'environ 300 millisecondes.

Pour obtenir la fiche des caractéristiques complètes, cliquez sur le lien en bas de page.
loading all models
loading all reviews
Rated 3 out of 5 by from Good, but... Does what they are supposed to. COT-1 However the Small diameter wire is not the best for constant re-use. Stripped wire length not good for the miniature connectors SMPW and HMPW. if you want to use the little rubber grommet that comes with the connectors you will need to re-strip the bare ends. And seeing as the price has gone up. The search is always on for an alternative.
Date published: 2015-12-17
Rated 5 out of 5 by from +Works great really? Its a thermocouple, I like the stick on feature and it seems to work well.
Date published: 2016-11-07
Rated 5 out of 5 by from Great Product Shipped fast and Packaged well! Would recommend for anyone needing a Cement-On Surface T/C, Style 1-B.
Date published: 2022-02-21
Rated 4 out of 5 by from review good product good product good product good product
Date published: 2018-03-22
  • y_2024, m_7, d_18, h_4
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_4
  • loc_en_CA, sid_CO1-K, prod, sort_[SortEntry(order=HELPFULNESS, direction=DESCENDING), SortEntry(order=POSITIVE_FEEDBACK, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_omega
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 6ms
  • REVIEWS, PRODUCT
loading all QA

What is the service life of these installed thermocouples on an unused part?

Asked by: Nate K
Thank you for your inquiry. Unfortunately we do not have any life cycle or time before failure data for these products. We cannot provide any signed documentation for these products lifespan since the lifespan is based entirely on the application and/or environmental conditions it is stored in.
Answered by: Application Engineer CB
Date published: 2022-10-17

What is the minimum temperature your CO1-K thermocouples will operate at? I see the low end of the "Process Temperature Range" in the specs above is 0°C. I assume they can operate lower, if calibrated independently? If so, what is the minimum temperature?

Asked by: MikeC
Thank you for your inquiry. The minimum temperature that the CO1-K can measure is 0 C due to being made with Special Limits of Error (SLE) wire. Special Limits of Error Wire (SLE) made products are only spec’d out for temperatures above 32°F (0°C). So, anything below 32°F (0°C) does not comply with the SLE specification. We don't state an accuracy for SLE Wire-Made Products below 0°C (32°F). Accuracy testing shows it is no longer linear. We cannot certify or guarantee the accuracy for temperatures below 0 C.
Answered by: Application Engineer MC
Date published: 2023-09-01

I would appreciate your advice for my project, I need a sensor with high accuracy to be installed on a pipe's surface and put it inside a soil container. the temperature range is going to be between 4 and -20 centigrade. Which product do you recommend?

Asked by: Amir
Thank you for your inquiry. I would recommend the SA2C-K-72.
Answered by: CB Engineer
Date published: 2020-09-16

What is the recommended cement to adhere to surface with max temp of 550 F?

Asked by: jjb2023
Thank you for your inquiry. We do not have any epoxy or cement for a maximum temperature of 550 F. The closest we can provide is the CC HIGH TEMP for a maximum temperature of 843 C. Here is the link: https://www.omega.com/en-us/accessories/adhesives-and-paste/ob-bond-chem-set/p/CC-HIGH-TEMP
Answered by: Application Engineer MC
Date published: 2023-09-01

WHAT GAUGE WIRE ARE THE LEADS? sOLID OR STRANDED.

Asked by: MIKECHYMBOR
Hi Mikechymbor Leads are 30 awg solid Best regards OMEGA
Answered by: AENwlk
Date published: 2020-06-29

Is this one thermocouple per pack? Or more?

Asked by: Anonymous
Thank you for your inquiry. This thermocouple is sold as an individual item, quantity 1.
Answered by: Application Engineer JB
Date published: 2019-11-19

What is the approximate size of the pad?

Asked by: arsenal49
Thank you for your inquiry. Here are the pad dimensions: Style 1: 0.75 x 0.37", Style 1-B: 19 x 12.7 mm, Style 2: 1 x 0.72" and Style 3: 3/4 x 3/8". You can also find these dimensions in the manual here: https://assets.omega.com/manuals/Co-SERIES.pdf
Answered by: Application Engineer SP
Date published: 2023-03-28

We have an application where the surface temperature will reach about 1250 Deg C , The Duration of test 25 Sec to 130Sec. Please confirm whether we can use CO1-K-B or CO2-K or any other suitable

Asked by: srini
The CO1-K-B and the CO2-K are not suitable for use above 370C or 650C respectively. You should look at IR as a possible solution and contact the Temperature Engineers at temp@omega.com.
Answered by: ApplicationsEngineerANB
Date published: 2022-01-31
  • y_2024, m_7, d_18, h_4CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_14
  • loc_en_CA, sid_CO1-K, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_omega
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 33ms
  • QUESTIONS, PRODUCT
fr-CA
fr
Enregistrer la configuration