Appelez-nous au 1-888-826-6342
Thermocouples magnétiques
Magnet Mount Thermocouples
Remises de volume disponibles
Calendrier de remise sur volume
| Quantité | Prix unitaire |
|---|---|
| 1-9 | C$240.98 |
| 10-24 | C$228.93 |
| 25-99 | C$216.88 |
| 100-499 | C$204.83 |
| 500-999 | C$192.78 |
| 1000+ | C$180.74 |
Ajouté à votre panier
Configuration terminée.
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Échec de l'enregistrement des configurations, cliquez sur le bouton Configurer Recommencer
- Measures Surface Temperature of Ferrous Materials
- Spring Mounted Thermocouple
- Single or Dual 53 Newton (12 lb) Pull Magnets
- J, K, E, T Calibrations
MP2-E-36-SMPW-M Options de modèles
Voir tous les modèlesModifiez ces spécifications pour commander un modèle différente. Toutes les combinaisons ne sont pas valides. Les options compatibles avec les sélections précédentes seront en gras.
*Les options en surbrillance ne sont pas compatibles. Veuillez sélectionner une combinaison différente.
Thermocouple Type
Sensor Application
Cable Insulation
Termination Connection Type
Mounting Style
Minimum Temperature Measurement
Category
Process Temperature Range
Cable Length
Color Code Standard
Probe Diameter
Features
An extremely versatile low cost magnetic mount thermocouple! Utilize for a myriad of applications where magnet mounting is feasible. A portable and flexible solution.
| Magnet Dimensions, MP1: 25 H x 38 W x 25 mm D (1.0 x 1.5 x 1.0") Magnet Dimensions, MP2: 108 mm H (with handle) x 64 W x 25 mm D (4.3 x 2.5 x 1.5") Lead Wires: 1 m (40"), SS overbraided glass standard, PFA-insulated optional |
Rated 5 out of
5
by
Dave from
Works as advertised
Works great. I didn't buy a female plug end, so I had to disassemble the male plug to gegget at the wires. Easily done.
Date published: 2016-02-03
Rated 1 out of
5
by
Kyle M from
Refund
Still waiting for my refund on this item, doesn’t work. Reads +\-100 deg from true
Date published: 2020-12-16
Rated 1 out of
5
by
Jonathan PM from
inaccurate.
It consistently read lower temperature than multiple reference surface thermocouple around 7% lower
Date published: 2020-05-18
Rated 5 out of
5
by
Robesco from
As described
I bought two of these for field measurements on process piping and vessels. Although they don't appear to be built for frequent placement and removal, I expect that with care they will function well for my purpose.
Date published: 2017-02-13
Rated 5 out of
5
by
150pilot from
Functionally works as advertised. Strong magnet.
Functionally works as advertised. Strong magnet. Interfaces well with Data Acquisition system.
Date published: 2016-05-02
Rated 4 out of
5
by
Clemson University from
Magnetic Thermocouple
Product was convenient and easy to use. This is an addditional tool to help with our testing lab.
Date published: 2024-06-20
Rated 5 out of
5
by
John Elke from
powerful magnetic mount thermocouple
Powerful magnet, easy installation. I have a very high temperature application in a difficult to mount and somewhat mobile installation location. This works perfectly.
Date published: 2023-10-05
Rated 5 out of
5
by
John Elke from
The best magnetic mount I've found.
Powerful magnet, easy installation. I have a very high temperature application in a difficult to mount and somewhat mobile installation location. This works perfectly.
Date published: 2023-10-05
Is the stated process temperature range also applicable to the available connector options?
The process temperature is only for the magnet and Thermocouple sensor. The connectors are only rated to 356F.
Date published: 2024-01-31
Is the same wire used on this unit available by the roll?
Thank you for asking your question.
Yes, we do that that same wire available in rolls(spools). An example of that part number would be TT-J-24-SB-50.
Date published: 2020-04-03
Are both of these thermocouples able to be put inside a powder coating curing oven or will the wire casing deteriorate due to the elevated temperature?
The MP1 Thermocouple has a PFA coated wire good to 260C but were not sure if the powder coating particles will be able to get into the probe tube and cause problems. The MP2 lead wire is rated up to 480C and is fiberglass and stainless steel over braid so is porous. We don't have any data to provide in this type of application but it seems they should be okay for a period of time.
Date published: 2023-10-04
Is the probe removeable from the magnetic mount base? (So that it's temperature measurements can be verified using a metrology drywell)
Thank you for the inquiry. Unfortunately the probe was not set up to be removeable from the magnetic mount.
Best regards,
OMEGA
Date published: 2023-03-29
it states temp range from 32-700 Deg F , do you have magnetic thermal couple for 1000 deg F rating ?
Thank you for your inquiry Derick K. Unfortunately, we do not offer a magnetic mount thermocouple with a maximum temperature of 1000 F. The maximum temperature for the Heavy-Duty Magnetic Mount Thermocouples is 700 F.
Date published: 2024-02-28
What's the response time on this item until it reads temperature accurately on a surface (not liquid)? For example: 5 seconds to full reading?
Thank you for your email.
Unfortunately we do not have any test data around the response time of these sensors. The sensor design along with the minimal contact makes the magnetic mount sensors not very fast acting.
Date published: 2019-08-21