Appelez-nous au 1-888-826-6342
Bolt-On RTD Sensor with Aluminum Flag Housing
120 in Fiberglass leads, Hi Temp, #3, #4 hole
Remises de volume disponibles
Calendrier de remise sur volume
Quantité | Prix unitaire |
---|---|
1-4 | C$255.86 |
5-9 | C$243.07 |
10-14 | C$237.95 |
15-24 | C$227.72 |
25-99 | C$222.60 |
100+ | C$217.48 |
Ajouté à votre panier
Configuration terminée.
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Échec de l'enregistrement des configurations, cliquez sur le bouton Configurer Recommencer
- Updated housing design for improved strain relief
- Standard hole for #3 and #4 screw. Options available for #5, #6, #8 screw
- Small aluminum housing allows for installation on most flat surfaces
- Sensor can be bolted or cemented into place
RTD-831-120-MTP-HT Options de modèles
Voir tous les modèlesModifiez ces spécifications pour commander un modèle différente. Toutes les combinaisons ne sont pas valides. Les options compatibles avec les sélections précédentes seront en gras.
*Les options en surbrillance ne sont pas compatibles. Veuillez sélectionner une combinaison différente.
Process Temperature Range
Nominal Resistance
Accuracy
Cable Insulation
Termination Connection Type
Cable Length
Additional features
Category
Sensor Application
Number of Wires
Omega's RTD-831 series 3-wire RTD sensor features an improved barrel and flag design on the aluminum housing which gives improved durability. The flag is machined to accept a #3, #4, #5, #6, #8 screw for easy installation on flat surfaces by either being bolted or cemented onto the surface. This is available in 100 Ω or 1000 Ω Platinum RTD element and is available in a high temperature (-HT) version. Connection options available are miniature 3-pin connector (-MTP), standard 3-pin connector (-OTP), stripped ends (-SE), and spade lugs (-LUG). For other connector types, please contact Sales. Applications for this type of sensor include product performance testing climate control/HVAC monitoring and control of processes hot plate equipment, and process pipes.
Rated 5 out of
5
by
ASTU from
Quality products
We specify Omega in our products. This and other Omega components meet our expectations and reliability constantly
Date published: 2023-12-06
The picture of this part and the drawing do not match. They are mirror images of each other. Can post pictures of the actual product? With the cable pointing to the left, I would like to know if the mounting hole is above or below the cylinder. Thanks
Please direct you question to temp@omega.com so your question can be fully investigated by an application Engineer.
Date published: 2023-08-21
Hello. Does the extended temperature range apply to the cable as well? Thanks
Yes the cable is fiberglass insulation allowing exposure to 450C as well.
Date published: 2023-11-03
What is a typical response time of the RTD-831 series Pt100 Class A sensor?
Thank you for your inquiry. Please send this request to temp@dwyeromega.com
Date published: 2024-06-14
What are the wire colors and connections for the RTD-831-SE sensor?
Thank you for your inquiry Sechan Engineer. The RTD-831-SE sensor has Red/Black/Black wires.
Date published: 2023-08-25
Is there a rating on the Electrical Isolation between the Aluminum housing and the lead wires?
Thank you for your inquiry. The temperature range for the fiberglass insulation is -73 to 482 C.
Date published: 2023-12-18
Are the wire leads Halogen free?
Thank you for the inquiry. The leads are not halogen free.
Best regards
OMEGA
Date published: 2024-08-21
For RTD-831-MTP-H170, what AWG are the leadwires?
Thank you for your inquiry. It uses 26 awg stranded wire.
Date published: 2023-07-26
Can RTD-831 series be used in Vacuum chamber like RTD-830 series? Thanks.
Hi Anonymous,
If used in vacuum there may be some outgassing from the epoxy used in construction; so we have no vacuum recommendation for this product; You would need to purchase and evaluate to see if would be acceptable. This has the same construction as the RTD-830. The new washer shape provides for stronger lead wire connection.
Best regards
OMEGA
Date published: 2021-11-01