Installation simple - endossement autocollant au silicone [à 260°C ]
Plage de température de -73C à 260°C continu, 315°C lors de l'utilisation avec le "ciment" (Ciments autosiccatifs OMEGABOND™ disponibles- placer le capteur et encapsuler avec ciment autosiccatif OMEGABOND™)
Terminaisons à fils dénudés en standard (prise miniature moulée avec détente des contraintes intégrale en option)
Dimensions du caoutchouc: 25 mm x 9,5 mm
Egalement disponible avec surtresse acier inoxydable pour des applications plus résistantes
OMEGA présente la nouvelle génération de nos thermocouples à réponse rapide à montage en surface. Le nouveau thermocouple SA1XL atteint des temps de réponse de moins de 0,15 secondes. Ce thermocouple est construit en utilisant une jonction en soie de verre/Kapton avec un fil de sortie avec isolation en soie de verre. Le SA1XL peut être utilisé en tant que thermocouple auto-adhésif pour des températures jusqu'à 175°C ou il peut être cimenté sur place pour des températures jusqu'à 315°C.
Fournis en paquets de 5. Tous les modéles standard sont indiqués dans le tableau "Pour commander" ci-dessous. Consultez la notice technique (pdf) pour des informations concernant les longueurs non standard.
Rated 2 out of
Quality of product has dropped in recent yearsHaving issues similar to those described by other users with units DOA. We have utilized this product for years (20-100 units/year) with little to no issues. We had been satisfied with the build quality and the ability to reuse these units several times if carefully applied/removed (5 stars), but within the last 1-2 years we have started to receive units that have been DOA (plug them in out of the box before even installing or removing adhesive backing, with no readout).
The 5-packs that we are now receiving generally have 1-2 units DOA (you're lucky if this is discovered out of the box rather than after spending time installing it), not sure how this could be seen as acceptable, especially if a simple "These were received DOA" from the customer does not result in shipping of functional replacement units as long as the DOA units are returned. I have already sent back some of the bad units with a similar response from Omega indicating that a "full evaluation" would be performed. I received no additional information following the return of the units.
Please Omega, revert back to whatever manufacturing process you were utilizing prior to these issues arising.
Date published: 2019-09-09
Rated 3 out of
Worked well - when they workedI bought 20 of these and they generally worked well. However, 4 of them did not function. The adhesive was good enough, but I wish it was stronger.
Date published: 2018-06-27
Rated 2 out of
Something has changed......The sample used to work great, had some robustness and never failed out of the box. in the last two years I've had to move away from using this product due to out of the box failures, the TC themselves becoming very fragile or early failures.
Date published: 2019-10-29
Rated 1 out of
ehhReceived first set and 3 of 5 didn't work immediately straight out of packaging would get no reading on meter. other two proceeded to break and come apart soon there after. Received 5 probes in replacement very easily however one of these didn't work fresh out of the box also. wouldn't order these again.
Date published: 2018-06-01
Rated 2 out of
Too FragileWe have ordered several packs of these thermocouples and even taking the most care we can to not damage them during installation, at least 1 of 5 does not work after it is installed. There seem to be some that do not work right out of the box, even before the tape is removed from the adhesive strip (so apparently these came from the factory not working). This product is ideal for a lot of what we do but we are frustrated with the high rate of product failure before use.
Date published: 2018-04-02
Rated 5 out of
Well made and presented toolPerfect for our application, which is verification and characterization of RF ASICS. We apply these to the chip package to assist with maintaining specific temperatures during testing for datasheet preparation.
Date published: 2021-03-29
Rated 5 out of
Self Adhesive Thermocouple Surface Mount.These surface probes are great for process readings on pipes, pumps and vessels.
Date published: 2021-02-25
Rated 3 out of
Quick Temperature ResponseThe product was quick to respond after being tied into the data recording system. The thermocouples had to be attached to the product, subject extreme temperature and then moved to the actual use of product unit. The thin nature of the wire allowed a few thermocouples to break off right at the end of the adhesive end as was expected. Heavier wire would be better but that would have slowed response time the customer demanded. Very useful product and easy to work with.
We kindly want to verify SA1XL sensor:
1. the compatibility with the wireless receiver/transmitter known as "UW series compact wireless thermocouple/RTD transmitter"; and
2. can it be used several times on different surfaces?
Asked by: champion
Thank you for your inquiry. This sensor is compatible with the UW Series. These sensors are single-use. You can purchase TAP adhesive labels to re-attach sensors.
Answered by: CB Engineer
Date published: 2020-10-09
Ordering a quanity of 1 equals 5 complete thermocouples, Right?
Asked by: Indiana Consumer
Hi, you are correct. For this product, QTY 1 = a 5-Pack. Please reach out anytime if you have any further questions. Thank you.
Answered by: Jane
Date published: 2019-04-26
What is the gauge of the cable wire?
Asked by: bmfaz
Thank you for your inquiry. The gauge of the cable wire is 30 AWG.