Appelez-nous au 1-888-826-6342
Thermocouples avec surface adhésive à réponse rapide
Surface Thermocouple with Self-Adhesive Backing - Package of 5
Remises de volume disponibles
Calendrier de remise sur volume
Quantité | Prix unitaire |
---|---|
1-9 | C$152.91 |
10-24 | C$145.26 |
25-99 | C$137.62 |
100-499 | C$129.97 |
500-999 | C$122.33 |
1000+ | C$114.68 |
Ajouté à votre panier
Configuration terminée.
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Échec de l'enregistrement des configurations, cliquez sur le bouton Configurer Recommencer
- Rouleau embobinant breveté
- Renfort adhésif pour faciliter l'installation
- Temps de réponse inférieur à 0.3 seconde
- Fils isolés par du PFA, avec code de couleur, de
1 m (40") ou de 2 m (80") - Résiste jusqu'à 175 °C (350 °F) à long terme
- Calibration de thermocouple disponible pour les types J,K,T et E
SA1-J Options de modèles
Voir tous les modèlesModifiez ces spécifications pour commander un modèle différente. Toutes les combinaisons ne sont pas valides. Les options compatibles avec les sélections précédentes seront en gras.
* Les options en surbrillance ne sont pas compatibles. Veuillez sélectionner une combinaison différente ou cliquez sur le bouton CONFIGURER pour créer la vôtre.
Thermocouple Type
Process Temperature Range
Termination Connection Type
Cable Length
Features
Category
Sensor Application
Cable Insulation
Color Code Standard
Mounting Style
Probe Diameter
Description
Les thermocouples avec surface adhésives OMEGA ont maintenant été améliorés pour inclure le populaire connecteur miniature avec notre rouleau embobinant breveté. Ce rouleau fournit un moyen de ranger le fil thermocouple non nécessaire pour les essais. Spécifications :
Calibrations des thermocouples: J (Fer-Constantan), K (CHROMEGA™-ALOMEGA™), T (Cuivre-Constantan), E (CHROMEGA™-Constantan)
Adhésif : colle à base de silicone
Température maximale : 175°C (350°F) à long terme
Température minimale : -60°C (-75°F) à long terme
Dimensions : 25 [longueur] x 19 [largeur] x 0.3 [épaisseur] mm (1 x 0.8 x 0.01")
Laminés : Polymère de haute température, et fibre de verre renforcée de couche de polymère
Fil : fil de calibre 30 recouvert de PFA
Rated 5 out of
5
by
Anonymous from
Thermocouple
Ready for use, simple connectivity, durable product
Date published: 2022-08-08
Rated 5 out of
5
by
Ashli from
Great thermocouple
I’ve been using this type of thermocouple throughout my career for engine and cooling applications for years. They work great and are very reliable.
Date published: 2022-01-29
Rated 4 out of
5
by
SSmith from
Well Made, Inexpensive
Well made for something that can be disposable because it does not cost much.
Date published: 2021-03-26
Rated 5 out of
5
by
Anonymous from
Small J Type Thermocouple
I was looking for a very small, J type thermocouple that would fit flat against a glass surface without an air gap. This self adhesive thermocouple, model SA1-J-72 met all of my needs and I was very relieved that it has 72" leads which is a big plus.
Date published: 2021-03-04
Rated 1 out of
5
by
gewissler from
not very adhesive
poor adhesion. would not stick to cleaned stainless steel pipe
Date published: 2020-12-02
Rated 5 out of
5
by
Anonymous from
Sticky as Maple Syrup.
When the surface is cleaned and prepped properly, these will stick to just about anything. Be careful contaminating them with your finger tips -- usually can only get one good use out of them before they lose their tackiness which is to be expected.
Date published: 2020-09-30
Rated 5 out of
5
by
Dale Zink from
Review of Surface Thermocouples
Nice quality device. Each TC was individually wrapped. The connector end has a professional looking strain relief on it. The only thing that might be an issue (and it could be either a positive or a negative), is the connector itself is sealed. On the one hand, users can't get into it and mess up the connections. On the other hand, if something does go wrong with the connections inside the connector, it isn't easily repairable and may not be repairable at all requiring the replacement of the device.
Date published: 2020-09-30
Rated 5 out of
5
by
Dock from
Great product!
Great product! Too bad you’re website is garbage! Please go back to the old one! I can find anything!
Date published: 2020-07-02
Rated 5 out of
5
by
oldmanrocha from
Very durable
I bought many of these over the years. Even after adhesive wears off the last forever without breaking
Date published: 2019-03-30
Rated 5 out of
5
by
dd45 from
fantastic TC
great product, gives me exactly what I want in a TC
Date published: 2019-03-20
Rated 5 out of
5
by
Jkar from
Works very good
I used them to monitor battery temperature project and worked very well. The stick on tape works very well and was able to re use them several times.
Date published: 2019-03-13
What is the accuracy of SA1-K thermocouples?
Thank you for your inquiry EngTester. The accuracy of SA1-K thermocouple is +/- 1.1°C or 0.4% whichever is greater.
Date published: 2022-06-22
Can this thermocouple be used in a vacuum environment (~10^-6 Torr)?
Thank you for your inquiry. Unfortunately this item is not compatible in a vacuum environment.
Date published: 2021-06-04
Can this thermocouples work properly in a surface underwater?
Thank you for your inquiry. This product is not suitable for water submersion.
Date published: 2020-10-05
Are these suitable for a Class 1, Div. 2 environment???
Thank you for your inquiry. This product is not rated for a Class I, Division 2 environment.
Date published: 2020-11-18
Whats the output signal? 4-20mA?
Thank you for your inquiry. The output of all thermocouples including the SA1 series is in mV
Date published: 2023-11-25
May I ask what is the transfer function (S-domain) of this sensor because I need to design a control system for certain application and I need the transfer function of this sensor.
Hi Hakmi,
Thank you for the inquiry. We have not evaluated for this detail on response times. Testing has shown better than 0.3 seconds response time.
Best regards,
OMEGA
Date published: 2024-01-02
What is the dielectric withstand voltage (specifically, DC) of the PFA insulation on these wires?
There is no dielectric rating on the insulation used on these Thermocouple probes. The dielectric constant for the PFA used is 2.1 per ASTM D50.
Date published: 2024-03-15
What material is the insulation?
Thank you for connecting with Omega Engineering.
The lead wire is PFA insulated on part number SA1-K-72-RoHS.
Date published: 2022-01-28
How do I convert the mV output to the respective temperature in degrees C?
Thank you for your inquiry. You'll need a thermocouple meter. Please see this link to our temperature meters: https://www.omega.com/en-us/test-inspection/handheld-meters/c/temperature-and-humidity-and-dew-point-meters
Date published: 2024-03-01
What surface preparation should be performed for titanium mounting.
Hi Wilson405,
Thank you for the inquiry. Just need to ensure surface is clean of oils.
Best regards
OMEGA
Date published: 2024-03-19
looking for cost and spec sheet for a SA1-T adhesive mount
Thank you for your inquiry obewan80. Here is the link for the SA1-T: https://www.omega.com/en-us/temperature-measurement/temperature-surface-sensors/sa1/p/SA1-T. You can find the price and data sheet on this web page. If you have any other questions, please do not hesitate to contact us directly at 1-800-622-2378, ask for Temperature Engineering or temp@omega.com.
Date published: 2023-11-25