Appelez-nous au 1-888-826-6342
Thermocouples avec surface adhésive à réponse rapide
Surface Thermocouple with Self-Adhesive Backing - Package of 5
Remises de volume disponibles
Calendrier de remise sur volume
Quantité | Prix unitaire |
---|---|
1-9 | C$258.17 |
10-24 | C$245.26 |
25-99 | C$232.35 |
100-499 | C$219.44 |
500-999 | C$206.54 |
1000+ | C$193.63 |
Ajouté à votre panier
Configuration terminée.
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Échec de l'enregistrement des configurations, cliquez sur le bouton Configurer Recommencer
- Rouleau embobinant breveté
- Renfort adhésif pour faciliter l'installation
- Temps de réponse inférieur à 0.3 seconde
- Fils isolés par du PFA, avec code de couleur, de
1 m (40") ou de 2 m (80") - Résiste jusqu'à 175 °C (350 °F) à long terme
- Calibration de thermocouple disponible pour les types J,K,T et E
SA1-K-120 Options de modèles
Voir tous les modèlesModifiez ces spécifications pour commander un modèle différente. Toutes les combinaisons ne sont pas valides. Les options compatibles avec les sélections précédentes seront en gras.
* Les options en surbrillance ne sont pas compatibles. Veuillez sélectionner une combinaison différente ou cliquez sur le bouton CONFIGURER pour créer la vôtre.
Thermocouple Type
Process Temperature Range
Termination Connection Type
Cable Length
Features
Category
Sensor Application
Cable Insulation
Color Code Standard
Mounting Style
Probe Diameter
Description
Les thermocouples avec surface adhésives OMEGA ont maintenant été améliorés pour inclure le populaire connecteur miniature avec notre rouleau embobinant breveté. Ce rouleau fournit un moyen de ranger le fil thermocouple non nécessaire pour les essais. Spécifications :
Calibrations des thermocouples: J (Fer-Constantan), K (CHROMEGA™-ALOMEGA™), T (Cuivre-Constantan), E (CHROMEGA™-Constantan)
Adhésif : colle à base de silicone
Température maximale : 175°C (350°F) à long terme
Température minimale : -60°C (-75°F) à long terme
Dimensions : 25 [longueur] x 19 [largeur] x 0.3 [épaisseur] mm (1 x 0.8 x 0.01")
Laminés : Polymère de haute température, et fibre de verre renforcée de couche de polymère
Fil : fil de calibre 30 recouvert de PFA
Rated 5 out of
5
by
PillarofIN from
Inexpensive monitoring
Purchased the thermocouples with 120 inch cable to monitor bearing temperatures on inaccessible vacuum pumps. For $20 each it is an extremely cost effective way to monitor these devices.
Date published: 2016-08-08
Rated 5 out of
5
by
bobby38 from
Very Accurate
I use these all the time in wireless temperature transmitters, work great!
Date published: 2016-03-20
Rated 5 out of
5
by
PROCESS CONTROL from
TERMOCUPLA
It is a good product, delivery time is fast. I recommend it.
Date published: 2024-05-13
Rated 5 out of
5
by
George N from
Great and easy to use for R&D testing
Excellent thermocouple for R&D testing. Accurate and simple to use.
Date published: 2024-03-01
Rated 5 out of
5
by
Michelle LeBrun from
Item as described in title
Very fast shipping and great communication of status of order.
Date published: 2024-02-09
Rated 5 out of
5
by
MJames from
Great product
Worked as expected for reading temperatures. Good product.
Date published: 2023-12-18
Rated 5 out of
5
by
Anonymous from
High quality, fast reacting thermocouple.
Well made thermocouple assembly. The connector and strain relief are always great quality, which I expect from Omega. The self sticking works well on aluminum and fiberglass. Very little thermal lag, the junction is very thin and responsive.
Date published: 2023-09-21
Rated 5 out of
5
by
MikeD from
High Quality Product!
Great Quality Product! Works exactly as described. A product you can count on. Don't waste time with imitations.
Date published: 2023-08-23
Are these thermocouples resistant to electrical noise? How can I shield these thermocouples?
Hi Varll,
Thank you for the inquiry. The SA1 series have a polyamide film on the top and bottom of the thermocouple element. This insulates the TC from electrical noise via direct contact with process. If you experience electrical noise via RF please contact us for more solutions.
Best regards
OMEGA
Date published: 2024-03-24
What is the dielectric withstand voltage (specifically, DC) of the PFA insulation on these wires?
There is no dielectric rating on the insulation used on these Thermocouple probes. The dielectric constant for the PFA used is 2.1 per ASTM D50.
Date published: 2024-03-15
Does the adhesive contain silicone?
The PSA is a Silicon based adhesive
Date published: 2021-02-15
With the strain relief option: Would the connector type able to come as Female instead of Male?
Thank you for your inquiry. We can only provide the male connector with the strain relief for this thermocouple.
Date published: 2024-08-01
Are these thermocouples suitable for an outdoor application? Specifically installation on the back of a solar panel for extended periods of time (> 6 months).
Yes, I have used these for that exact application with some Kapton tape on the TC and they work well.
Date published: 2020-05-20
What is the life expectancy in a heat cycling application with 50 psi applied?
Thank you for your inquiry Bob58. These probes are not pressure rated and they have not been tested on pressurized environments. We do not recommend the use of this probe in pressure environments. Life expectancy for any of our of products depends on the frequency the product is used.
Date published: 2023-11-25
Can I use this Thermocouple and connector with the wireless unit SS-002-0-NA?
Thank you for your question. You have to purchase the model thermocouple with stripped leads because SS-002-0-NA has screw terminals for wire connection.
Date published: 2020-09-05
I would like to get the polynomial curves for the SA1 T-type and J-type thermocouples. Where can I find that data?
You can request the ITS-90 Thermocouple Polynomials by sending it to temp@dwyeromega.com and one can be sent to you.
Date published: 2024-06-12