Skip to search Skip to main content Skip to navigation

Appelez-nous au 1-888-826-6342

Nous avons remarqué que vous veniez de . Visitez votre site local pour connaître les offres régionales et l'assistance en direct.

Thermocouples avec surface adhésive à réponse rapide

Surface Thermocouple with Self-Adhesive Backing - Package of 5


Article# SA1-K

Remises de volume disponibles
Calendrier de remise sur volume
Quantité Prix unitaire
1-9 C$152.87
10-24 C$145.23
25-99 C$137.58
100-499 C$129.94
500-999 C$122.30
1000+ C$114.65

En stock

Délai de livraison (si pas en stock): 5 semaines
Surface Thermocouple with Self-Adhesive Backing - Package of 5 SA1-K SA1-K
  • Rouleau embobinant breveté
  • Renfort adhésif pour faciliter l'installation
  • Temps de réponse inférieur à 0.3 seconde
  • Fils isolés par du PFA, avec code de couleur, de
    1 m (40") ou de 2 m (80")
  • Résiste jusqu'à 175 °C (350 °F) à long terme
  • Calibration de thermocouple disponible pour les types J,K,T et E

SA1-K Options de modèles

Voir tous les modèles

Modifiez ces spécifications pour commander un modèle différente. Toutes les combinaisons ne sont pas valides. Les options compatibles avec les sélections précédentes seront en gras.

* Les options en surbrillance ne sont pas compatibles. Veuillez sélectionner une combinaison différente ou cliquez sur le bouton CONFIGURER pour créer la vôtre.

Thermocouple Type
Process Temperature Range
Termination Connection Type
Cable Length
Sensor Application
Cable Insulation
Color Code Standard
Mounting Style
Probe Diameter


Les thermocouples avec surface adhésives OMEGA ont maintenant été améliorés pour inclure le populaire connecteur miniature avec notre rouleau embobinant breveté. Ce rouleau fournit un moyen de ranger le fil thermocouple non nécessaire pour les essais.

Spécifications :
Calibrations des thermocouples: J (Fer-Constantan), K (CHROMEGA™-ALOMEGA™), T (Cuivre-Constantan), E (CHROMEGA™-Constantan)
Adhésif : colle à base de silicone
Température maximale : 175°C (350°F) à long terme
Température minimale : -60°C (-75°F) à long terme
Dimensions : 25 [longueur] x 19 [largeur] x 0.3 [épaisseur] mm (1 x 0.8 x 0.01")
Laminés : Polymère de haute température, et fibre de verre renforcée de couche de polymère
Fil : fil de calibre 30 recouvert de PFA

loading all models
loading all reviews
Rated 5 out of 5 by from Inexpensive monitoring Purchased the thermocouples with 120 inch cable to monitor bearing temperatures on inaccessible vacuum pumps. For $20 each it is an extremely cost effective way to monitor these devices.
Date published: 2016-08-08
Rated 5 out of 5 by from Very Accurate I use these all the time in wireless temperature transmitters, work great!
Date published: 2016-03-20
Rated 5 out of 5 by from TERMOCUPLA It is a good product, delivery time is fast. I recommend it.
Date published: 2024-05-13
Rated 5 out of 5 by from Great and easy to use for R&D testing Excellent thermocouple for R&D testing. Accurate and simple to use.
Date published: 2024-03-01
Rated 5 out of 5 by from Item as described in title Very fast shipping and great communication of status of order.
Date published: 2024-02-09
Rated 5 out of 5 by from Great product Worked as expected for reading temperatures. Good product.
Date published: 2023-12-18
Rated 5 out of 5 by from High quality, fast reacting thermocouple. Well made thermocouple assembly. The connector and strain relief are always great quality, which I expect from Omega. The self sticking works well on aluminum and fiberglass. Very little thermal lag, the junction is very thin and responsive.
Date published: 2023-09-21
Rated 5 out of 5 by from High Quality Product! Great Quality Product! Works exactly as described. A product you can count on. Don't waste time with imitations.
Date published: 2023-08-23
  • y_2024, m_6, d_12, h_8
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_20
  • loc_en_CA, sid_SA1-K, prod, sort_[SortEntry(order=HELPFULNESS, direction=DESCENDING), SortEntry(order=POSITIVE_FEEDBACK, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_omega
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 10ms
loading all QA

Are these thermocouples suitable for an outdoor application? Specifically installation on the back of a solar panel for extended periods of time (> 6 months).

Asked by: davidlenfesty
Yes, I have used these for that exact application with some Kapton tape on the TC and they work well.
Answered by: TCuser
Date published: 2020-05-20

Can I use this Thermocouple and connector with the wireless unit SS-002-0-NA?

Asked by: AMCN
Thank you for your question. You have to purchase the model thermocouple with stripped leads because SS-002-0-NA has screw terminals for wire connection.
Answered by: Raptor
Date published: 2020-09-05

Can this thermocouple be installed in a cylindrical metal surface? Cylinder diameter range 6-in to 12-in

Asked by: AMCN
Yes this Thermocouple can be installed on a cylinder and most curved surfaces.
Answered by: ApplicationsEngineerANB
Date published: 2020-09-08

Can this thermocouple be used in a vacuum environment (~10^-6 Torr)?

Asked by: VLharrington
Thank you for your inquiry. Unfortunately this item is not compatible in a vacuum environment.
Answered by: Application Engineer CB
Date published: 2021-06-04

Can this thermocouples work properly in a surface underwater?

Asked by: Neutrino
Thank you for your inquiry. This product is not suitable for water submersion.
Answered by: CB Engineer
Date published: 2020-10-05

Are these suitable for a Class 1, Div. 2 environment???

Asked by: Buysy
Thank you for your inquiry. This product is not rated for a Class I, Division 2 environment.
Answered by: Application Engineer JB
Date published: 2020-11-18

I had one peel off of a metal surface, can an adhesive be applied to re-attach it? If so, which one?

Asked by: Moosa
Thank you for your inquiry Moosa. You could use the OB-200 epoxy as an adhesive up to a maximum temperature of 175 C. Using the epoxy will be a permanent fix. You can also use any general purpose adhesive to reattach the sensor as long as it doesn't exceed the maximum temperature of 175 C.
Answered by: Application Engineer SP
Date published: 2021-07-20

What is the dielectric withstand voltage (specifically, DC) of the PFA insulation on these wires?

Asked by: HVBatteryGuy
There is no dielectric rating on the insulation used on these Thermocouple probes. The dielectric constant for the PFA used is 2.1 per ASTM D50.
Answered by: ApplicationsEngineerANB
Date published: 2024-03-15

What material is the insulation?

Asked by: Hira
Thank you for connecting with Omega Engineering. The lead wire is PFA insulated on part number SA1-K-72-RoHS.
Answered by: Application Engineer RD
Date published: 2022-01-28

What surface preparation should be performed for titanium mounting.

Asked by: Wilson405
Hi Wilson405, Thank you for the inquiry. Just need to ensure surface is clean of oils. Best regards OMEGA
Answered by: NorwalkAE_RS
Date published: 2024-03-19

looking for cost and spec sheet for a SA1-T adhesive mount

Asked by: obewan80
Thank you for your inquiry obewan80. Here is the link for the SA1-T: You can find the price and data sheet on this web page. If you have any other questions, please do not hesitate to contact us directly at 1-800-622-2378, ask for Temperature Engineering or
Answered by: Application Engineer MC
Date published: 2023-11-25

Can this survive radiant energy and how much?

Asked by: EGR1
  • y_2024, m_6, d_11, h_7CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.42
  • cp_2, bvpage2n
  • co_hasquestionsanswers, tq_20
  • loc_en_CA, sid_SA1-K, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_omega
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 7ms
Enregistrer la configuration