Appelez-nous au 1-888-826-6342
Capteurs de surface RTD avec caoutchouc de silicone autocollant
Self-Adhesive Thermocouples
Remises de volume disponibles
Calendrier de remise sur volume
Quantité | Prix unitaire |
---|---|
1-9 | C$65.25 |
10-24 | C$61.99 |
25-99 | C$58.73 |
100-499 | C$55.46 |
500-999 | C$52.20 |
1000+ | C$48.94 |
Ajouté à votre panier
Configuration terminée.
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Échec de l'enregistrement des configurations, cliquez sur le bouton Configurer Recommencer
- Polyimide Carrier
- Self-Adhesive Backing
- Low Mass Junction Area for Fast Response
- Resistant to many Chemicals and Oils
SA3-E-120 Options de modèles
Voir tous les modèlesModifiez ces spécifications pour commander un modèle différente. Toutes les combinaisons ne sont pas valides. Les options compatibles avec les sélections précédentes seront en gras.
*Les options en surbrillance ne sont pas compatibles. Veuillez sélectionner une combinaison différente.
Thermocouple Type
Process Temperature Range
Termination Connection Type
Cable Length
Minimum Temperature Measurement
Category
Sensor Application
Cable Insulation
Color Code Standard
Probe Diameter
Features
These thermocouples can be used in outdoor and wet environments, including bright sunlight, with little to no effect on performance or accuracy. Our unique construction techniques provides a fast responding thermocouple junction in a thin and flexible mounting pad. These SA3 thermocouples are available in 2 styles, stripped #30AWG solid leads, or with a miniature color coded connector.
Specifications
Thermocouple: ANSI color code J/K/T/E or IEC color code JI/KI/TI/EI
Accuracy: Special limits of error
Junction Type: Ungrounded sensor construction
• Polyimide tape base with silicone adhesive and paper peel sheet
• Polyimide tape cover
• PFA insulated and jacketed 30 AWG cable
• Glass filled nylon connector when specified
Temperature Range:
Sensor: -17 to 260°C (0 to 500°F)
Connector: -29 to 180°C (-20 to 356°F)
Insulation Resistance: 100 M? minimum at 100 Vdc at room temperature and sensor mounted to surface
Specifications
Thermocouple: ANSI color code J/K/T/E or IEC color code JI/KI/TI/EI
Accuracy: Special limits of error
Junction Type: Ungrounded sensor construction
• Polyimide tape base with silicone adhesive and paper peel sheet
• Polyimide tape cover
• PFA insulated and jacketed 30 AWG cable
• Glass filled nylon connector when specified
Temperature Range:
Sensor: -17 to 260°C (0 to 500°F)
Connector: -29 to 180°C (-20 to 356°F)
Insulation Resistance: 100 M? minimum at 100 Vdc at room temperature and sensor mounted to surface
Rated 5 out of
5
by
Chris_H from
Improved design
Good adhesive, seems better than the older style of these which I used to use, and the more rectangular size seems to work nicer as well instead of the old design which was more square-ish.
Date published: 2022-10-21
Rated 5 out of
5
by
PJester from
I’d do it again!
A quality thermocouple for surface readings in a tight space!
Date published: 2022-02-26
Rated 5 out of
5
by
DBL II from
Adhesive thermocouples
Perfect for my sea trials, we will use to measure exhaust temps underway.
Date published: 2021-08-20
is it possible to have a connector that measures temperatures from -40 to 180 or whatever high tempoerature with these thermocouples or there is just a connector from -26 to 180 as mentionned.
Thank you for your inquiry! Often, the T/C connectors aren't rated for the same temperatures as the thermocouples they are connected to, this is fine. However, the T/C connector type should always match the T/C type.
Date published: 2021-06-14
What is the accuracy of these SA3-T Type?
Thank you for your inquiry. For Type T Thermocouple Temperatures above 0°C; ±0.5°C or ±0.4% of the actual value (use the greater of the two tolerances)
Date published: 2023-07-12