What data logger can be used with your heat flux sensors?

HFS DAQ is a data acquisition system intended to read and record measurements from HFS heat flux and integrated temperature sensors

If I need to calculate the total heat power through HFS-5, should I multiply the measured heat flux with sensor area (6.5cm2) or total area (9.2cm2)?

Hi Han2021 Thank you for the inquiry. Please forward this question to TEMP@OMEGA.CON. Best regards OMEGA

What is the maximum sampling rate for the HFS-5?

Hi Trevor C Thank you for the inquiry. Sample rate would be determined by the instrumentation used. Response time of the sensor is 0.6 seconds as noted on the data sheet. Best regards OMEGA

What is the output voltage range for HFS5?

Hi Daniel18 Just under 1 mv at max heat flux. You'll need a meter with micro volt level resolution. Best regards, OMEGA

Can the HFS-5 heat flux sensor be used outside in the weather?

Hi Trevor42 Thank you for the inquiry. This sensor is not suitable for outdoor weather conditions. Best regards, OMEGA

Skip to search Skip to main content Skip to navigation

Contact

Heat Flux Sensors for Heat Transfer Measurements

Ultra-sensitive plate heat flux sensor

(0)

Cliquez et maintenez pour zoomer

Fiche technique (PDF)

C$1,327.40

Article# UHFS-09

Remises de volume disponibles

Calendrier de remise sur volume

Quantité	Prix unitaire
1-9	C$1,327.40
10-24	C$1,261.03
25-49	C$1,234.48
50-99	C$1,181.39
100-199	C$1,154.84
200+	C$1,128.29

Qté

Ajouté à votre panier

En stock

Délai de livraison (si pas en stock): 6 semaines

Ajouter à la liste des projets

HFS-5 Economical sensor for use in R&D heat transfer measurements and thermal systems evaluation
HFS-6 Larger sensor for use in buildings thermal evaluation and higher sensitivity
UHFS-09 Larger sensor, highest sensitivity and waterproof for use in geothermal studies
HFS DAQ as the accessory of HFS series, low-cost data acquisition system to accurately measure the signals outputted from HFS heat flux sensors and their integrated thermocouples

Voir Spécs

UHFS-09 Options de modèles

Voir tous les modèles

Modifiez ces spécifications pour commander un modèle différente. Toutes les combinaisons ne sont pas valides. Les options compatibles avec les sélections précédentes seront en gras.

*Les options en surbrillance ne sont pas compatibles. Veuillez sélectionner une combinaison différente.

Process Temperature Range

Encapsulation Material

Nominal Sensitivity

Sensor Thickness

Specific Thermal Resistivity

Absolute Thermal Resistance

Heat Flux Range

Response Time

Sensing Area Dimensions

Total Sensor Dimensions

Sensing Area

Total Sensor Area

Category

Thermocouple Type

Number of Wires

Specs

Modifier les options du modèles

Omega's Heat Flux Sensors provide accurate readings, high sensitivity with fast response times. The sensors are rugged and economical. They are ideal for R&D applications ranging from aerospace, industrial processes to building sciences applications. Do not forget to get your Omegatherm high temperature and high thermal conductive paste for mounting.

All Models