Appelez-nous au 1-888-826-6342
Heat Flux Sensors for Heat Transfer Measurements
Ultra-sensitive plate heat flux sensor
Remises de volume disponibles
Calendrier de remise sur volume
Quantité | Prix unitaire |
---|---|
1-9 | C$1 327.40 |
10-24 | C$1 261.03 |
25-49 | C$1 234.48 |
50-99 | C$1 181.39 |
100-199 | C$1 154.84 |
200+ | C$1 128.29 |
Ajouté à votre panier
Configuration terminée.
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Échec de l'enregistrement des configurations, cliquez sur le bouton Configurer Recommencer
- HFS-5 Economical sensor for use in R&D heat transfer measurements and thermal systems evaluation
- HFS-6 Larger sensor for use in buildings thermal evaluation and higher sensitivity
- UHFS-09 Larger sensor, highest sensitivity and waterproof for use in geothermal studies
- HFS DAQ as the accessory of HFS series, low-cost data acquisition system to accurately measure the signals outputted from HFS heat flux sensors and their integrated thermocouples
UHFS-09 Options de modèles
Voir tous les modèlesModifiez ces spécifications pour commander un modèle différente. Toutes les combinaisons ne sont pas valides. Les options compatibles avec les sélections précédentes seront en gras.
*Les options en surbrillance ne sont pas compatibles. Veuillez sélectionner une combinaison différente.
Process Temperature Range
Encapsulation Material
Nominal Sensitivity
Sensor Thickness
Specific Thermal Resistivity
Absolute Thermal Resistance
Heat Flux Range
Response Time
Sensing Area Dimensions
Total Sensor Dimensions
Sensing Area
Total Sensor Area
Category
Thermocouple Type
Number of Wires
Omega's Heat Flux Sensors provide accurate readings, high sensitivity with fast response times. The sensors are rugged and economical. They are ideal for R&D applications ranging from aerospace, industrial processes to building sciences applications. Do not forget to get your Omegatherm high temperature and high thermal conductive paste for mounting.
we are using the HFS-5 Heat Flux+ T type Thermocouple sensor and the HFS-DAQ. I need to add 8' of length to the wire leads of the sensor to reach our test location. Do you sell these as integral cables? if not, can you suggest extension cables? Thanks
Hi Keithgm,
Thank you for the inquiry. We d not offer integrated cable unfortunately.
For the thermocouple side;
You'll need type T extension wire similar to https://www.omega.com/en-us/temperature-measurement/temperature-wire-and-cable/thermocouple-wires/extt-tx-wire/p/EXTT-T-24-25.
For the heat flux side you can use 2 conductor instrumentation wire (copper).
Best regards
OMEGA
Date published: 2022-08-23
Hi, I am following up on my question about the output voltage. I need to make sure that my data logger is scaled properly. This sensor has a heat flux range of +/- 150 kW/m^2. Does +/- 150 kW/m^2 correspond to +/- 1 mV respectively? Thank you.
Hi Daniel8,
Please forward your request to TEMP@OMEGA.COM for assistance in scaling a datalogger or other meter.
Best regards,
OMEGA
Date published: 2023-04-25
Are any of these heat flux sensors (such as the HFS-5) capable of measuring the actual temperature in addition to the heat flux?
Thank you for your inquiry. There are two pairs of leads for the heat flux measurement and the Thermocouple Type T temperature measurement.
Date published: 2021-06-16