Appelez-nous au 1-888-826-6342
Thermocouples isolés avec des prises mini ou standard, avec ou sans rouleau embobinant, vendu en paquets de 5
Ready-Made Insulated Thermocouples with Kapton®, PFA, Glass Braid Insulation and Molded Connectors
Remises de volume disponibles
Calendrier de remise sur volume
| Quantité | Prix unitaire |
|---|---|
| 1-9 | C$149.19 |
| 10-24 | C$141.73 |
| 25-99 | C$134.27 |
| 100-499 | C$126.81 |
| 500-999 | C$119.35 |
| 1000+ | C$111.89 |
Ajouté à votre panier
Configuration terminée.
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Échec de l'enregistrement des configurations, cliquez sur le bouton Configurer Recommencer
- Les prix indiqués sont pour les paquets de 5 thermocouples
- Disponible pour les thermocouples de types J, K et T
- Fils avec une tolérance classe 1
- Isolation Kapton (temp. maxi 315°C )
- Isolation soie de verre (temp. maxi 480°C )
- Isolation PFA (temp. maxi 260°C )
- Longueurs standard de 1 et 2 mètres
- Connecteur sub-miniature moulé avec un réducteur de tension/rouleau embobinant intégré
- Température de fonctionnement maximale du connecteur de 220°C
- Lot de 5 pratique disponible en inventaire
5SRTC-GG-J-24-2M Options de modèles
Voir tous les modèlesModifiez ces spécifications pour commander un modèle différente. Toutes les combinaisons ne sont pas valides. Les options compatibles avec les sélections précédentes seront en gras.
* Les options en surbrillance ne sont pas compatibles. Veuillez sélectionner une combinaison différente ou cliquez sur le bouton CONFIGURER pour créer la vôtre.
Thermocouple Type
Process Temperature Max
Process Temperature Range
Cable Insulation
Termination Connection Type
Cable Length
Color Code Standard
Wire Gauge
Pack Size
Category
Process Temperature Unit
Process Temperature Min
Junction Type
Nominal Resistance
Accuracy
Number of Wires
Description
Les thermocouples isolés sont fournis en lots de 5 et il y a 4 modèles différents en promotion sur cette page:
5SRTC avec une prise thermocouple miniature et une détente des contraintes pour le fil thermocouple.
5SC possède une prise thermocouple miniature avec un rouleau embobinant intégral pour stocker le fil thermocouple.
5LRTC avec une prise thermocouple miniature et une détente des contraintes pour le fil thermocouple.
5LSC possède une prise thermocouple miniature avec un rouleau embobinant intégral pour le fil thermocouple.
Tous les modèles sont disponibles avec des longueurs de fil de 1 ou 2 mètres et 3 types d'isolation de fil: Kapton et PFA offrent une bonne protéction contre l'humidité et l'abrasion et ont des températures de service nominales de 315°C et 260°C. L'isolation en soie de verre a une température de service nominale de 480°C. Les diamètres de fils disponibles sont de 0,08, 0,13, 0,25, 0,5 et 0,8 mm. Les diamètres plus petits ont un temps de réponse plus rapide tandis que les diamètres larges sont plus durables.
Des exemples de modèles courants sont indiqués dans le tableau "Pour commander". Plusieurs configurations sont immédiatement disponibles pour livraison. Vous pouvez consulter la notice technique (pdf) pour la liste de tous nos modèles disponibles ou vous pouvez également utiliser le "Tableau constructeur de référence" ci-dessous pour trouver le prix et la disponibilité du modèle désiré.
Rated 4 out of
5
by
strobb from
as advertised
they are as advertised, and function the way they should
Date published: 2016-08-22
Rated 3 out of
5
by
Plingane from
deformed tip; inconsistent manufacturing
Three of the 5 devices had unequal lengths of wire emerging at the tip, so when welded the tip junction was pulled to one side and even pulled back a bit. My expectation was that the tip would lay along the central axis of the wire so that I could advance the tip to just touch a surface, and only two devices met that expectation. Better manufacturing control is needed.
Date published: 2023-05-16
Rated 4 out of
5
by
Science Lab from
Shipping Delays
Limited inventory, long delay for shipping entire order
Date published: 2021-11-16
Rated 5 out of
5
by
Steve47 from
Very useful thermocouples
We have used dozens of these thermocouples over the last couple of years. Tjey are very reliable. Unfortunately, they are used in a destructive test and are usually used only once. But we keep coming back for more!
Date published: 2019-03-18
Rated 5 out of
5
by
AndrewM from
Well Constructed, Good Value
Received ahead of schedule. Item is well constructed, spool design allows for organized storage within a purchase case. Cost is a good value.
Date published: 2024-09-10
Rated 5 out of
5
by
Cody E from
Great and Reliable
We use this thermocouple when freezing saltwater to measuring freezing rates. Works well and haven't had one fail yet
Date published: 2024-07-03
Rated 5 out of
5
by
Cowboy Bebop from
Good Thermocouples, Bad Selector/Configurator
Omega's thermocouples are as good as their online selector/configurator isn't. I've never had any issues with their thermocouples or service, but they really need to redesign their online configurator to be user friendly. Finding out what is in stock is an ordeal and I've known of some people just giving up and buying elsewhere.
Date published: 2024-05-24
Rated 5 out of
5
by
Bridgelux from
Strongly recommend to buy T/C from Omega
The quality of Snap-On Strain Relief Thermocouples are great and accurate.
Date published: 2024-05-01
What is the overall diameter of this sensor? What is the accuracy between 0 C to 50 C?
Thank you for your inquiry. The maximum nominal size of the wire (w x h) is 0.024" x 0.040". The accuracy is 0.5 C or 0.4 % whichever value is greater.
Date published: 2024-02-11
1. What is the difference between "mini male connector with spool cap" and "single spool, mini male connector with spool cap"? 2. It says the price as $70.36 for a pack of 5. So its 5 miniconnectors with 36" wire with each? Thank you.
Thank you for your inquiry. The descriptions both refer to the same product. The price that you see is for a 5 sensors total.
Date published: 2020-05-19
What's the difference between "Miniature Connector with Spool Cap" and "Mini Male Connector with Spool Cap"?
Thank you for connecting with Omega. Both descriptions refer to the same product. Price you see is for package of 5 sensors
Date published: 2022-12-18
Are these autoclavable? If yes, can they be autoclaved multiple times? We need to be able to sterilize them before and after use.
Thank you for your inquiry scslab. These wire sensors are not for autoclave use. Here is the link to our autoclave thermocouples: https://www.omega.com/en-us/temperature-measurement/temperature-probes/probes-with-lead-wires/p/TJ36-ACL
Date published: 2024-02-11
Do you have an epoxy available to coat the tips so they could be placed in a motor winding to read temperature?
Thanks for connecting with Omega. Per your question, depending on the temperature, please review our OB-100/200 Series
https://www.omega.com/en-us/sensors-and-sensing-equipment/sensing-accessories/adhesives-and-paste/p/OB-100-OB-200-OT-200
Date published: 2019-06-26
Since these are sold in packs of five. If I purchase quantity 1 does that mean I will get one pack of 5?
That is correct. QTY 1 = is one pack of 5. Please contact us at temp@omega.com if you have any further questions. Thanks!
Date published: 2019-05-20
I have Omega HH502 and trying to get a thermocouple that can be used with. I see that thermocouple that came with it has model # SC-TT-K-30-36. However, I don't see any SC-XX model available. Can I use 5SC-XX models instead with the HH502?
Thank you for your inquiry UM2431. The SC-TT-K-30-36 is available on our website. Here is the link: https://www.omega.com/en-us//p/SC-TT-K-30-36. You can also us the 5SC models too with the HH502.
Date published: 2024-02-11
The product data sheet specifies "NIST Calibration Available" however I do not see how to specify that in the numbering scheme. For example I would like the 5SRTC-GG-K-30-108 with this option
To get part number 5SRTC-GG-K-30-108 with NIST traceable certification you would have to use the Configure Now box on the 5SRTC page. This will let you build the part number step by step and one of the last steps is to answer with or without Calibration. If you hit YES then you'll get part number 5SRTC-GG-K-30-108-CAL-3. The link here will aid you in finding that builder.
https://www.omega.com/en-us/search/?text=5srtc
Date published: 2020-02-13
Would the exposed bead type thermocouple be suitable for use in Deionized water? If not, what are the concerns?
Thank you for your inquiry! Exposed thermocouples are not recommended for immersion/submersion in liquid because of the risk of a short. Deionized water may be less prone to this issue, but a probe is still the recommended option.
Date published: 2021-01-30
What would be the bead and insulation diameter for the thermocouple with 30 AWG wire and PFA insulation?
Thank you for your inquiry. The diameter of the bead is approximately 2.5 times the diameter of each wire without the insulation. Item# 5SRTC-TT-T-30-36 has a nominal size (cross section) of 0.6 x 1.0 mm (0.024" x 0.040").
Date published: 2024-04-02
What is the typical impedance of K-type and J-type thermocouples (specifically 48-inch, 40-AWG if available)?
Hi Ahti,
Thankyou for the inquiry, Resistance per double ft @ 20 C is 60.88 Ohms and 37.01 Ohms for K and J respectively. This would be the resistance of a 1 ft thermocouple measured from one stripped lead to the other stripped lead.
Best regards
OMEGA
Date published: 2023-05-31