PST rejoint DwyerOmega. En savoir plus>
Temperature/Humidity/Dew Point Meter w/Optional Data Logger
Handheld Temperature, Humidity, and Dew Point Meter
Ajouté à votre panier
Configuration terminée.
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Échec de l'enregistrement des configurations, cliquez sur le bouton Configurer Recommencer
- Temperature measurement: Ambient Temp. Dew Point Temp. Wet Bulb Temp. (THDP-10),
- Heat index, WBGT temperature measurement (THDP-10-DL).
- Hold function: Freeze current readings on LCD.
- High/Low Temp. & RH alarm threshold setting.
THDP-10 Options de modèles
Voir tous les modèlesModifiez ces spécifications pour commander un modèle différente. Toutes les combinaisons ne sont pas valides. Les options compatibles avec les sélections précédentes seront en gras.
*Les options en surbrillance ne sont pas compatibles. Veuillez sélectionner une combinaison différente.
Storage
Communications Protocol
Features
Category
Input Type
Minimum Temperature Measurement
Maximum Temperature Measurement
Display Type
Accuracy Value
Supply Power
The THDP-10 Series is a Handheld Digital Temperature, Humidity, Dew Point Meter with min/max, data storage, and data hold features. On Line Data Logging with DL Model
| Battery | Measurement | Features |
|---|---|---|
Up to 10 Hours | 2.6-10.5 ft | Visual and Audible Alarms |
Rated 1 out of
5
by
Maggie from
Accuracy questionable
Humidity function was out of tolerance. Unit was given with a more than 2 year old certificate of calibration. Sent to an accredited lab and found out of tolerance. This was a "new" unit.
Date published: 2024-11-14
RoHS 2015/863 - Voir le certificat
Approuvé CE
When does the calibration certificate expire? How long is it valid for?
Hi Tetratek
Thank you for the inquiry. We suggest to use 1 year calibration cycle starting from the time you place the instrument in to service.
Best regards
OMEGA
Date published: 2021-08-06
How quick is the response/change in readings? I may take a reading at one location, then move to another location for another reading - how fast does this unit adjust/stabilize for a new value?
Depending on the air flow you should probably expect about a 1 minute response time on the RH to reach the full stable reading. Temperature would be less than 10 seconds to register the stabilized reading.
Date published: 2022-09-26
Where are the instruments made?
Thank you for your inquiry. The country of origin is Taiwan.
Date published: 2022-06-29
How much does it cost to have this unit re-calibrated?
Hi Tom_B,
For price quote please email request to SALES@OMEGA.COM. Note in the email that the request is for a return for calibration.
Best regards
OMEGA
Date published: 2021-11-10
Does the device come pre-calibrated and supplied with a NIST certificate?
Thank you for your inquiry. This unit only comes with a Certificate of Conformance (CAL-1). It doesn't come with a NIST certificate. Please send a quote request to sales@omega.com for a quote for this product with a NIST certificate.
Date published: 2023-02-21
Is there an API for reading this unit with our own software?
Hi Dr D
Please forward this request to TEMP@OMEGA.COM.
Best regards
OMEGA
Date published: 2022-12-05