Skip to search Skip to main content Skip to navigation

Contact

Temperature/Relative Humidity Transmitter w/ Display & Probe

Temperature/Relative Humidity Transmitters

3,8

(5)

Temperature/Relative Humidity Transmitters

Cliquez et maintenez pour zoomer

Fiche technique (PDF)

C$622.08

Article# HX93BC

Remises de volume disponibles

Calendrier de remise sur volume

Quantité	Prix unitaire
1-4	C$622.08
5-9	C$590.98
10-24	C$578.53
25-49	C$553.65
50-99	C$541.21
100+	C$528.77

Qté

Ajouté à votre panier

En stock

Délai de livraison (si pas en stock): 6 semaines

Ajouter à la liste des projets

4 to 20 mA, 0 to 1 Vdc, 0 to 5 Vdc or 0 to 10 Vdc Outputs for Both Temperature and Relative Humidity
Rugged Industrial Splashproof Enclosure NEMA 13 (IP54)
Accurate to ±0.6°C (0 to 50°C) and ±2.5% (10 to 90% Relative Humidity)
New Models with Built-In Digital Display to Indicate Temperature and Relative Humidity
Duct Mount Kit Included with Duct Mount and Remote Probe Models
Field Replaceable Temperature/Relative Humidity Probe (Except for Duct Mount Model)

Voir Spécs

HX93BC Options de modèles

Voir tous les modèles

Modifiez ces spécifications pour commander un modèle différente. Toutes les combinaisons ne sont pas valides. Les options compatibles avec les sélections précédentes seront en gras.

*Les options en surbrillance ne sont pas compatibles. Veuillez sélectionner une combinaison différente.

Output Type

Display Type

Supply Voltage Type

Additional Feature

Input Type

Input Ranges

Programability

Specs

Modifier les options du modèles

Description

The HX93B and HX93BD Series transmitters provide remote and on-site monitoring of temperature and relative humidity. Both series output a linearized current or voltage signal proportional to the temperature and relative humidity. Relative humidity output is temperature compensated. Current output models enable placing of the transmitter at a remote location virtually any distance away from the measuring device. The HX93BD models feature a built-in digital display that indicates both temperature and relative humidity simultaneously. All models use an accurate digital sensor. A stainless steel mesh type filter, easily removable for cleaning, protects the sensor. Mounting screws are easily accessible inside the rugged, polycarbonate enclosure which protects the electronics to NEMA 13 (IP54) specifications.

Specifications
Input Voltage Range: 30 Vdc maximum
    HX93B Series: 9 to 30 Vdc
    HX93BV2 Series: 12 to 30 Vdc
Measuring Range
Temperature; Standard: -30 to 75°C (-22 to 167°F); Special: -20 to 75°C (-4 to 167°F)
Relative Humidity: 0 to 100%
Accuracy
Temperature: ±0.6°C from 0 to 50°C (32 to 122°F); ±1.25°C from -30 to 0°C (-22 to 32°F) and 50 to 75°C (122 to 167°F
Relative Humidity: ±2.5% from 10 to 90% RH; ±3.5% from 5 to 10% and 90 to 95% RH; ±4% from 0 to 5% and 95 to 100% RH
Output
HX93BC or HX93BDC: 4 to 20 mA for 0 to 100% RH and -30 to 75°C (-22 to 167°F)
HX93BV0: 0 to 1 Vdc for 0 to 100% RH and -30 to 75°C (-22 to 167°F)
HX93BV1: 0 to 5 Vdc for 0 to 100% RH and -30 to 75°C (-22 to 167°F)
HX93BV2: 0 to 10 Vdc for 0 to 100% RH and -30 to 75°C (-22 to 167°F)
Relative Humidity Temperature Compensation: -30 to 75°C (-22 to 167°F)
Temperature Response Time: 5 seconds minimum, 30 seconds maximum
Relative Humidity Response Time: 8 second typical
Repeatability: ±0.1% RH, ±0.2°C (0.4°F)
Housing: Gray polycarbonate, NEMA rated up to 13 (IP54)
Connections: Liquid-tight nylon with neoprene gland, for 2.50 to 8.00 mm (0.09 to 0.315") diameter cable; internal 6 position terminal block accepts 14 to 22 gauge wire
Dimensions:
    HX93B(*) (without Probe): 80.01 L x 82.30 W x 55.63 D mm (3.15 x 3.24 x 2.19")
    HX93B(*)-D (with Probe): 80.01 L x 82.30 W x 183.13 D mm (3.15 x 3.24 x 7.21")
    TP-SP (Short Probe): ø16 x 71.88 L mm (ø0.63 x 2.83")
Weight:
    HX93B(*): 251 g (8.9 oz)
    HX93B(*)-D: 256 g (9.0 oz)
    HX93B(*)-RP1: 352 g (12.4 oz)
Display (HX93BD Series Only)
Indicators: Two 4 digit backlit LCD
Display Rate: 1 reading per second
Display Resolution:
    Relative Humidity: 0.1% RH
    Temperature: 0.1°C (0.1°F)

All Models

In Stock Only

passer en revue

Rated 5 out of 5 by Stevemcq from Temperature/Relative Humidity Transmitter Tried other units first, with inconstant and sporadic readings. This unit is very consistent and accurate.

Date published: 2017-08-31

Rated 5 out of 5 by Anonymous from Late but always a good product excellent product always a good product with a quality specification OK

Date published: 2024-01-06

Rated 5 out of 5 by tsmith35 from Works great even in a dirty environment I got several of these units for capturing ambient temperature and humidity around some of the batch mixers in my plant. The units were easy to set up and were quite reliable, especially considering the dirty environment that they lived in.

Date published: 2020-11-03

Rated 3 out of 5 by NRod from Generally very good. Although they are expensive it is nice to have both the display and the analog output. They are generally reliable for extended periods of time.However, one of the last two I purchased was dead out of the box. That was not something I had seen before, having used dozens of this generation and the previous generation.

Date published: 2020-08-03

Rated 1 out of 5 by Evan_ from Unknown functionality due to manufacturing issue I bought this sensor and it was labeled properly HX93BV2 for the 0-10Vdc version on the outside but on the inside, the printed circuit board is marked as "C" indicating it's a 4-20mA version. So I exchanged it and alas, the second one has the same assembly issue.

Date published: 2019-10-25

Manuals & Downloads

Manuels et guides (1)

HX93B_manual manuel de l'utilisateur

Fiche technique (1)

HX93B_spec

Conformité (3)

Des Articles (1)

Conditionneurs de Signal

Questions et réponses

I have a hx93bd the led just shows hash marks, no temp or RH

Asked by: Rob111

Hi NJENG Thank you for the inquiry. This is most likely a probe problem. Probe is replaceable on this series. See the Data Sheet for your model#. Best regards OMEGA

Answered by: NorwalkAE_RS

Date published: 2021-09-17

I have an HX93BDC that I bought some time ago to have as a spare for one in service. I powered it up today and the analog outputs are working properly but there is no display. The backlight works, but no readout of temperature or humidity.

Asked by: Mike01

Hi Mike01 Thank you for the inquiry. Please check connections to the display board. For further assistance please forward request to TEMP@OMEGA.COM. Best regards OMEGA

Answered by: NorwalkAE_RS

Date published: 2021-10-12

Is the chassis ground terminal, #5, for safety grounding only, or does connecting this affect the performance of the device?

Asked by: CharlieP

Hi CharlieP Thank you for the inquiry. 5 and 4 terminals are internally connected. These are used as common (-) return side of power source. This is not a safety ground connection. Best regards OMEGA

Answered by: NorwalkAE_RS

Date published: 2022-02-16

re HX93B: 1) assuming the sensor is immersed in an air stream, what velocity range is the calibration valid? 2) what is the minimum storage temperature? 3) what altitude range is the sensor calibration valid?

Asked by: Chris00

Hi Chris00, Thank you for the inquiry. Please forward these questions to TEMP@OMEGA.COM. Best regards OMEGA

Answered by: NorwalkAE_RS

Date published: 2022-02-23

Can we calibrate the HX93BC? If so how would we do this, if not can we send it back to you for calibration? What would you recommend?

Asked by: wjwhite

Hi wjwhite, Thank you for the inquiry. HX93BC needs to be returned to Omega for calibration service. Best regards, OMEGA

Answered by: NorwalkAE_RS

Date published: 2021-01-11

Since terminals 4 and 5 are connected internally in the HX93BC, under what conditions is it advisable to connect the #4 terminal?

Asked by: CharlieP

Hi CharlieP Thank you for the inquiry. Recommend to follow the drawing in connecting power supply (-) to terminal 4. Best regards OMEGA

Answered by: NorwalkAE_RS

Date published: 2022-02-23

This sensor can be used to measure RH and temperature in a biogas stream with % CH4: 50-60 % CO2: 30-4 % O2: 1-2 ppm H2S: 1000-3000 ppm Temperature: 30-50 ° C Pressure: 1-1.

Asked by: jimontoy

Hi JLMontoy Thank you for the inquiry. This sensor would not be compatible with the detailed process gas combination. These are calibrated in an standard air environment. Best regards OMEGA

Answered by: NorwalkAE_RS

Date published: 2021-09-30

Does the HX93BDC have calibration certificate available from Omega? We are using it only for personal comfort in a lab but wanted to see if we should calibrate it prior to installation or if it is factory calibrated and meets accuracy specs as received.

Asked by: Doug88

Hi Doug88, Thank you for the inquiry. The HX93BDC units are calibrated to factory specs.They do not require extra calibration before service. Certificate of conformance is included with your order. Best regard OMEGA

Answered by: AENorwalk

Date published: 2020-07-27

Temperature/Relative Humidity Transmitters Questions - page 2

Accessoires

Accessories

TH-RP

Field replaceable remote probe with 3 m (10') cable and M12 connector

C$237.64

0 In Stock

Qté

TH-SP

Field replaceable 71.88 L mm (2.83') short probe with M12 connector

C$237.64

0 In Stock

Qté

HX92-CAL

Calibration kit, 11 and 75% relative humidity standards

C$236.47

2 In Stock

Qté

TX4-100

30.5 m (100 ft) wire, 4-conductor, shielded

C$77.05

15 In Stock

Qté

IND-KIT

Replacement Mounting Kit, for external industrial probes.

C$23.87

0 In Stock

Qté

IP-PCI-10P

Porous Polyethylene Industrial Probe Cap, for wet environments, 10 pack

C$50.98

0 In Stock

Qté

Temperature/Relative Humidity Transmitter w/ Display & Probe

HX93BC Options de modèles

I have a hx93bd the led just shows hash marks, no temp or RH

I have an HX93BDC that I bought some time ago to have as a spare for one in service. I powered it up today and the analog outputs are working properly but there is no display. The backlight works, but no readout of temperature or humidity.

Is the chassis ground terminal, #5, for safety grounding only, or does connecting this affect the performance of the device?

re HX93B: 1) assuming the sensor is immersed in an air stream, what velocity range is the calibration valid? 2) what is the minimum storage temperature? 3) what altitude range is the sensor calibration valid?

Can we calibrate the HX93BC? If so how would we do this, if not can we send it back to you for calibration? What would you recommend?

Since terminals 4 and 5 are connected internally in the HX93BC, under what conditions is it advisable to connect the #4 terminal?

This sensor can be used to measure RH and temperature in a biogas stream with % CH4: 50-60 % CO2: 30-4 % O2: 1-2 ppm H2S: 1000-3000 ppm Temperature: 30-50 &deg; C Pressure: 1-1.

Does the HX93BDC have calibration certificate available from Omega? We are using it only for personal comfort in a lab but wanted to see if we should calibrate it prior to installation or if it is factory calibrated and meets accuracy specs as received.

This sensor can be used to measure RH and temperature in a biogas stream with % CH4: 50-60 % CO2: 30-4 % O2: 1-2 ppm H2S: 1000-3000 ppm Temperature: 30-50 ° C Pressure: 1-1.