Relais statiques

The Omega's SSRL series of solid state relays are used to control large resistance heaters in conjunction with temperature controllers. 3-phase done using 2 or 3 SSR’s.

The SCR19 Series Power Controllers are designed to proportion electric power to resistive loads only, such as ovens, furnaces, heat sealers, etc.

The OMEGA SSRLDUAL series solid-state relays are two totally independent ac output relays in a single standard panel mount with snubber & protection against false triggering

Designed for superior thermal performance in harsh industrial environments, OMEGA’s new SSRDIN/SSR3PH relay is the most advanced DIN rail solid state relay in its range.

OMEGA’s SSRDIN Series Solid State Relays fully integrated with heat sink and DIN Rail mounting plate in a space-saving design. They are touch safe with LED input indication.

The versatile RELAY-URM Series relay module can switch up to eight 15 A loads using low-level input signals from PLCs, process controllers, and indicators.

The SCR19-H and SCR39-H Series power controllers are designed to proportion electric power to resistive loads only, such as ovens, furnaces, heat sealers, etc.

The OMEGA PCM series converter modules facilitate conversion of a 4 to 20 mA output to an on/off time proportioning output 3 to 32 Vdc Input to SSR.

The OMEGA PCM5 Series converter is designed to convert a 4 to 20 mA signal from a process/ temperature controller or computer to a time proportional output.

Less than 100 microamps at 14 Vdc actuates the unit to control ac loads to 5 amps at 120 Vac and 230 Vac models, Less than 100 microamps at 14 Vdc actuates.

The SSRL series are latching 5 amp SPST Normally Open relays with a small output current to sense the closing of up to two dry mechanical relay contacts.