Appelez-nous au 1-888-826-6342
Emetteurs thermocouple en-t�te
Thermistor Temperature Transmitter
Remises de volume disponibles
Calendrier de remise sur volume
Quantité | Prix unitaire |
---|---|
1-4 | C$136.04 |
5-9 | C$129.24 |
10-24 | C$126.52 |
25-49 | C$121.08 |
50-99 | C$118.35 |
100+ | C$115.63 |
Ajouté à votre panier
Configuration terminée.
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Échec de l'enregistrement des configurations, cliquez sur le bouton Configurer Recommencer
- Supports Many Thermistor Types
- 2-Wire, Loop Powered
- 4 to 20 mA Output
- PC Configurable Ranges (Requires Programmer)
TX206TH Options de modèles
Voir tous les modèlesModifiez ces spécifications pour commander un modèle différente. Toutes les combinaisons ne sont pas valides. Les options compatibles avec les sélections précédentes seront en gras.
*Les options en surbrillance ne sont pas compatibles. Veuillez sélectionner une combinaison différente.
Input Type
Input Class
Input Ranges
Output Type
Output Class
Supply Voltage Type
Programability
The TX206TH is a cost effective “smart” in head transmitter that accepts thermistor temperature sensors and converts sensor output over a configured range to a standard industrial (4 to 20) mA transmission signal.
A variety of thermistor types are available when using the configuration software: select thermistor type, temperature range, units and burnout direction, without requiring calibration equipment.
PC configuration is performed quickly using our new USB port driven configurator by simply connecting two clips to the TX206TH loop terminals and following the software instructions. Calibration set-up may be saved as a file on the PC for later use.
Alternatively, a single pushbutton and LED indicator allows the user to configure transmitter range against a manually set input condition. A red LED is included to help guide the user. The LED also operates as a sensor error indicator.
Transmitters can be factory configured for any range specified at the time of order, removing the need for user configuration. Extra lead time is required.
A variety of thermistor types are available when using the configuration software: select thermistor type, temperature range, units and burnout direction, without requiring calibration equipment.
PC configuration is performed quickly using our new USB port driven configurator by simply connecting two clips to the TX206TH loop terminals and following the software instructions. Calibration set-up may be saved as a file on the PC for later use.
Alternatively, a single pushbutton and LED indicator allows the user to configure transmitter range against a manually set input condition. A red LED is included to help guide the user. The LED also operates as a sensor error indicator.
Transmitters can be factory configured for any range specified at the time of order, removing the need for user configuration. Extra lead time is required.
Rated 5 out of
5
by
Sarg from
universal generic programmable transmitter
I purchased this with the hope I could program it to my own NTC thermistor which I succeeded in doing with a resistor decade box, power supply, and milliamp meter. It will monitor motor stators on a semi-hermetic compressor. Thermistor transmitters are hard to find. I was lucky to find this one. It can be programmed in less than a minute once you are set up.
Date published: 2019-04-02
What are the screw mechanical sizes? I need to specify connecting hardware.
Thank you for your inquiry Clint. Unfortunately we do not have any specific information about the screw sizes. If you have any further questions please email the Temperature Technical Support at temp@omega.com or call 1-888-826-6342.
Date published: 2021-10-15
Hi, I have the current thermistor model ST-W24E-XL9 to convert to 4 to 20mA. I have a TX206TH. Will it supported? or any xml file similar I can use?
Thank you for the inquiry. The TX206TH has a small library of sensors stored in memory. Check to see If you sensor is on the list or equivalent to one on the list;
TX206TH sensors list stored in software;
YSI-2-25B
YSI-10KB
44000 Series
3KB 44005 44030
5KB 44007 44034
10KB 44016 44036
10KH 44006 44031
30KH 44008
2252KB 44004 44033
Carel
NTC10K beta3435 Carel
US Sensors
P222KJ2
PS10212
PS103G2
PS103J2
PS203J2
PS302J2
PS303J2
PS502J2
PS602J2
Best regards
OMEGA
Date published: 2024-01-16
Can I join one lead from two different 10K thermistors with the other two distinct leads(one from each thermistor) terminating separately on two TX206TH units?
Thank you for the inquiry. You might have problem with ground loops between the TX206TH modules. We cannot guarantee that this would work.
Best regards
OMEGA
Date published: 2023-10-29
We have non-linear Honeywell 20K NTC thermistors model C7041C (18") in our HVAC system, we need to convert temperature ohmic value to a representative 4-20madc signal. Our system has a 24VDC power supply. Will the TX206TH work with the Honeywell model?
Hi Jim22,
Thank you for the inquiry. The speed link program allows selection of YSI series ( our 44000 series) thermistors;
https://assets.omega.com/spec/44000_THERMIS_ELEMENTS.pdf
These thermistor resistance curves are not the same as Honeywell 20K NTC.
Best regards
OMEGA
Date published: 2022-08-26
Is this compatible with Honeywell T775 series PTC thermistor sensors?
Hi NPRL,
The Honeywell T775 series are PT1000's which do not follow the thermistor resistance values of 2252K Ohm, 3K Ohm, 5K Ohm, 10K Ohm, and 30K Ohm. This series would not be compatible with the TX206TH transmitter.
Date published: 2022-12-21
Are PTC Thermistors supported by this converter? If so what sizes?
Hi Cwann,
Thank you for the inquiry.
TX206TH sensors list stored in software;
YSI-2-25B
YSI-10KB
44000 Series
3KB 44005 44030
5KB 44007 44034
10KB 44016 44036
10KH 44006 44031
30KH 44008
2252KB 44004 44033
Carel
NTC10K beta3435 Carel
US Sensors
P222KJ2
PS10212
PS103G2
PS103J2
PS203J2
PS302J2
PS303J2
PS502J2
PS602J2
Other sensors are not compatible.
Best regards
OMEGA
Date published: 2023-05-05