Appelez-nous au 1-888-826-6342
Polyimide Flexible Heater with Polyimide Strain Relief
1 in Width, 3 in Length, Self-Adhesive, 5 W/in2
Remises de volume disponibles
Calendrier de remise sur volume
Quantité | Prix unitaire |
---|---|
1-4 | C$78.59 |
5-9 | C$74.66 |
10-24 | C$73.09 |
25-49 | C$69.95 |
50-99 | C$68.37 |
100+ | C$66.80 |
Ajouté à votre panier
Configuration terminée.
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Échec de l'enregistrement des configurations, cliquez sur le bouton Configurer Recommencer
- All polyimide strain relief and insulation
- Optional pressure sensitive adhesive models
- Temperature ranges from -57°C (-71°F) to 232°C (450°F)
- Non-magnetic heating element
PLMLV-103/5-P Options de modèles
Voir tous les modèlesModifiez ces spécifications pour commander un modèle différente. Toutes les combinaisons ne sont pas valides. Les options compatibles avec les sélections précédentes seront en gras.
*Les options en surbrillance ne sont pas compatibles. Veuillez sélectionner une combinaison différente.
Shape
Temperature range
Power Density
Power (watts)
Supply Voltage
Diameter
Width
Length
Pressure senstivie Adhesive (PSA)
Thickness
Heater Material
The PLM-Series polyimide flexible heaters are offered in a variety of sizes and watt densities. These flexible heaters are polyimide insulated with a polyimide strain relief designed to be used in various environments and hard to reach places. They feature a non-magnetic heating element and watt densities of 2.5 W/in2, 5 W/in2 or 10 W/in2.
PLM-Series heaters have a thickness of 0.01 for a low profile wherever they are installed. Self-adhesive options available for easy and simple installation and eliminate the need for clamping. Temperature ranges from -40°C (-40°F) to 149°C (300°F) for self-adhesive models and -57°C (-71°F) to 232°C (450°F) for no adhesive models.
The PLM-Series heaters are made of polyimide for increased flexibility for curved surfaces and chemical resistivity. The thin nature of these heaters makes them ideal for tight spaces and good for applications such as hot plates, airplanes, storage tanks, beakers, trays, drying chambers and more.
- RoHS 2015/863 - Voir le certificat
- Approuvé CE
- UKCA
Can kapton heaters be submersed in deionized water? I am looking to heat a gel to 37C from the inside. The gel is poured in liquid form in di Water at 50C, with the heater in it, then the gel sets at room temperature.
Thank you for your inquiry. These heaters are not suitable for water immersion. Danger Of Electrical Shock.
Date published: 2024-01-31
What models of temperature controllers work with this device, specifically PID models? Also, what is the lead material?
Thank you for your inquiry UndergradBMEresearcher. We need the part number of the heater in order to provide a controller that can work with the heater. Please call 1-866-512-7404, ask for Temperature Engineering and speak to one of our temperature engineers over the phone or send an email to heaters@omega.com
Date published: 2022-11-06
For the Low Voltage polyimide heaters, can the supply voltage exceed the Omega stated 28V? For example, supply at 35V instead?
The supply Voltage range is +/- 10% of 28 VDC and exceeding this may cause damage to the Heater.
Date published: 2024-01-30
What Pressure-sensitive adhesive is used on these?
Thank you for your inquiry. This product use 468 MP adhesive.
Date published: 2023-05-03
Is the nominal power density given with the supply voltage as AC or DC?
Thank you for your inquiry. Power Density is based on DC Voltage.
Date published: 2024-01-30
Is this heater compatible with PID Temperature Controller Model: SYL-2362 from Auber instruments?
Thank you for your inquiry. Yes these are compatible with that controller.
Date published: 2024-01-30
Can I run this on 28VDC instead of 28VAC? I assume that it rectifies the VAC signal to VDC anyway.
Thank you for your inquiry. You may use DC Voltage.
Date published: 2024-01-30