Appelez-nous au 1-888-826-6342
Economical Very Low DP Transducer with Bi-directional Ranges
0 to 10 inH2O, Differential Pressure
Remises de volume disponibles
Calendrier de remise sur volume
| Quantité | Prix unitaire |
|---|---|
| 1-9 | C$406.76 |
| 10-24 | C$398.62 |
| 25-49 | C$390.49 |
| 50-99 | C$374.22 |
| 100+ | C$370.15 |
Ajouté à votre panier
Configuration terminée.
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Échec de l'enregistrement des configurations, cliquez sur le bouton Configurer Recommencer
- For Dry Gases
- Ranges from 0.25 inH2 O to 100 inH2 O
- For Use in Building Management, HVAC Ducts or Clean Rooms
- Works with Unregulated Voltage Source
PX2650-10D5V Options de modèles
Voir tous les modèlesModifiez ces spécifications pour commander un modèle différente. Toutes les combinaisons ne sont pas valides. Les options compatibles avec les sélections précédentes seront en gras.
*Les options en surbrillance ne sont pas compatibles. Veuillez sélectionner une combinaison différente.
Pressure Range
Pressure Type
Accuracy Class
Accuracy Value(compensated range)
Output Signal
Electrical Output
Pressure Port Size
Pressure Port Type
Connection/Termination
Operating Temperature Range
SPECIFICATIONS
Excitation: 9 to 30 Vdc unregulated
Output Impedance: <100Ω
Output Span: Set to 5 Vdc ±50 mV
Zero Offset: Set to ±50 mV
Accuracy: ±1% BFSL at constant temperature (includes linearity, repeatability and hysteresis)
Linearity: ±0.98% FS (typical)
Hysteresis: 0.1% FS (typical)
Repeatability: ±0.05% FS Compensated Temperature Range: -18 to 65°C (0 to 149°F)
Thermal Effects: ±0.06%/°C (#177;0.033%/°F)
Proof Pressure: ±10 psi, all ranges
Position Effect: Factory calibration with diaphragm vertical
Sensor: Capacitive
Media: Air or similar non-conducting gases
Pressure Port: 3/16' OD pressure fitting for 1/4' tube
Case: Fire-retardant glass-filled polyester
Mounting: 2 tabs with #8 holes
Electrical Connection: Screw terminals
Weight: 85 g (3 oz)
Excitation: 9 to 30 Vdc unregulated
Output Impedance: <100Ω
Output Span: Set to 5 Vdc ±50 mV
Zero Offset: Set to ±50 mV
Accuracy: ±1% BFSL at constant temperature (includes linearity, repeatability and hysteresis)
Linearity: ±0.98% FS (typical)
Hysteresis: 0.1% FS (typical)
Repeatability: ±0.05% FS Compensated Temperature Range: -18 to 65°C (0 to 149°F)
Thermal Effects: ±0.06%/°C (#177;0.033%/°F)
Proof Pressure: ±10 psi, all ranges
Position Effect: Factory calibration with diaphragm vertical
| Range | Zero Offset (%FS/G) |
|---|---|
| 0 to 0.5 in H2O | 0.6 |
| 0 to 1 in H2O | 2.2 |
| 0 to 5 in H2O | 1.4 |
Sensor: Capacitive
Media: Air or similar non-conducting gases
Pressure Port: 3/16' OD pressure fitting for 1/4' tube
Case: Fire-retardant glass-filled polyester
Mounting: 2 tabs with #8 holes
Electrical Connection: Screw terminals
Weight: 85 g (3 oz)
RoHS 2015/863 - Voir le certificat
Approuvé CE
What is the calibration factor (psi/V) according to the factory calibration? This information was not provided in the User Manual.
Thank you for your inquiry, the output is 5 Vdc ±50 mV over the full range of the sensor
Date published: 2023-05-24
Could you please tell me the resolution of the A/D converter on model PX2650-10D5V?
The PX2650-10D5V simply has a linear 0 to 5VDC signal output over it's 0 to 10" wc differential pressure. Signal resolution wonder depend on the input signal resolution of the device you are reading this signal with.
Date published: 2020-02-28
These would be used in an agricultural/harvesting, dirty air environment. What can be done to keep the lines clean from debris?
The only thing we can suggest is an inline filtering system of some sort
Date published: 2024-01-19