PST rejoint DwyerOmega. En savoir plus>
High Temp Jack Panel Assemblies for Standard Thermocouple Connectors
High Temperature Jack Panels for Standard Size Ceramic Connectors
Remises de volume disponibles
Calendrier de remise sur volume
Quantité | Prix unitaire |
---|---|
1-9 | C$326.97 |
10-49 | C$310.62 |
50-99 | C$297.54 |
100-999 | C$277.92 |
1000-4999 | C$261.58 |
5000+ | C$245.23 |
Ajouté à votre panier
Configuration terminée.
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Échec de l'enregistrement des configurations, cliquez sur le bouton Configurer Recommencer
NHJP1-12-K Options de modèles
Voir tous les modèlesModifiez ces spécifications pour commander un modèle différente. Toutes les combinaisons ne sont pas valides. Les options compatibles avec les sélections précédentes seront en gras.
*Les options en surbrillance ne sont pas compatibles. Veuillez sélectionner une combinaison différente.
Panel Length
Panel Height
Thermocouple Type
Number of Connector Rows
Connector Type
Number of Junction Box Positions
Color Code Standard
Features
OMEGA high temperature jack panels feature ceramic connectors mounted in a steel plate for service temperatures up to 1000°F (537°C). These panels with UHX connectors are ideal when glazed ceramic or nylon connector panels would contaminate a vacuum system.
Other panels available upon request. Customs Panels are $1000 minimum order for custom SKU part number.
|
|
Other panels available upon request. Customs Panels are $1000 minimum order for custom SKU part number.
Rated 3 out of
5
by
MichaelMeisman from
These may work for you but not for me.
With the heat cycling that takes place in an oven I guess these are as good as Omega makes. These are not long term solutions to connection points inside any oven in my opinion. I have larger ovens 30' x 22' x 10', 2 of them. I have long cables that run from these outlets to the thermoprobes embedded in the tooling. These ovens have large fans that swirl the air inside at about 25 MPH. The air movement combined with the temperatures and the weight of the extension cables causes these connectors to loose conductivity in about 6 months. Not to mention that at times the extension cable will just unplug at times because the socket cannot keep friction hold. It has taken me a lot of time and effort but this should be the last round of these connectors that have never worked for me in these Wisconsin Ovens I have to deal with. I have found connectors that actually have positive locking cams that take all the stress off the conductor points and put it on the shell housing where the stresses should be. All conductors are made from the proper material for matching metals in all thermocouple types. I tried to deal with Omega engineers with this issue and that went no where.
If you have a oven or other use where there is no stress on the plug and socket and your runs are short these most likely will work for you. But for me, inside the oven, with the wind and temperature cycles (max temp 500F) they are woefully inadequate.
Date published: 2020-10-02
Is the NHJP2-12-N product have a CE mark? If yes where can I locate the Declaration of Conformity?
Thank you for your inquiry. This product does not carry any CE mark or listing.
Date published: 2021-12-17
Where can I get the DWG file of this connector?
You can get the dimensions from the data sheet PDF located under the bullets of the product page.
Date published: 2021-09-30