RTD probes with 1/8" NPT brass compression or bayonet fittings and armored cable. Commonly used in extruder & molding equipment. Both straight and bend options available.
Configurable thermocouple probes with lead wire. Standard size transition joint from probe to cable is molded (260°C max). Probe diameters range from .062" to .250".
This RTD probe has stainless steel-overbriaded wires which offers durability for applications where the wire is continually moving or exposed to sharp objects.
Configurable thermocouple probes with fiberglass insulated cable that is rated to 482°C. Available with Stainless Steel, Inconel, and Omegaclad XL sheaths.
Probe contains an integrated circuit (IC) transducer AD592CN that provides an output in microamps that is proportional to temperature. Requires 4 to 30 VDC input voltage.
The high temp version of our spring-loaded quick-connect bayonet style thermocouple probes with armored cable. Commonly used in extruder & molding equipment.
Configurable thermistor probes for immersion applications with 316 SS sheath, strain relief spring and PFA extension cable. Available with selection of resistances and sizes.
Type R, S or B platinum thermocouple probes with ceramic protection tubes and transition joint to flexible extension cable. For use in high temperature applications.
RTD probes that can be cut to the desired length with a standard tube cutter to fit field applications. Plastic plug in tube end protects the wires from sharp edges.
Thermocouple probe has a metal transition between the sensor & cable. Cable has BX armor or Stainless Steel Overbraid to protect from damage and a mini connector attached.
Small diameter (0.062" or less) thermocouple probes with a compact transition joint between the probe and PFA or Fiberglass extension cable. Use where space is limited.
Thermocouple probes with 1/16" OD & a .020" diameter reduced tip for enhanced response to temperature change. Metal transition joint with PFA insulated cable & mini connector.
Omega's "BX" armored probe is designed for resistance to abrasion and snagging and excessive movement. Comes with choice of PFA- or fiberglass-coated wires.
Thermocouple probes that can be cut to the desired length with a standard tube cutter to fit field applications. Plastic plug in tube end protects the wires from sharp edges.
Used when the probe is installed some distance from the logger, controller, or other data acquisition device. Available in a variety of lead wire types with stripped leads or connectors attached.