Thermocouples avec surface adhésive à réponse rapide
Surface Thermocouple with Self-Adhesive Backing - Package of 5
Remises de volume disponibles
Calendrier de remise sur volume
| Quantité | Prix unitaire |
|---|---|
| 1-9 | 96,00 C$ |
| 10-24 | 91,20 C$ |
| 25-99 | 86,40 C$ |
| 100-499 | 81,60 C$ |
| 500-999 | 76,80 C$ |
| 1000+ | 72,00 C$ |
Ajouté à votre panier
Configuration terminée.
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Échec de l'enregistrement des configurations, cliquez sur le bouton Configurer Recommencer
Surface Thermocouple with Self-Adhesive Backing - Package of 5 is rated
out of
5 by
11.
- Rouleau embobinant breveté
- Renfort adhésif pour faciliter l'installation
- Temps de réponse inférieur à 0.3 seconde
- Fils isolés par du PFA, avec code de couleur, de
1 m (40") ou de 2 m (80") - Résiste jusqu'à 175 °C (350 °F) à long terme
- Calibration de thermocouple disponible pour les types J,K,T et E
Modifier les options
Voir tous les modèlesToutes les combinaisons ne sont pas valides. Les options compatibles avec les sélections précédentes seront en gras.
* Les options en surbrillance ne sont pas compatibles. Veuillez sélectionner une combinaison différente ou cliquez sur le bouton CONFIGURER pour créer la vôtre.
Category
Thermocouple Type
Process Temperature Range
Sensor Application
Cable Insulation
Termination Connection Type
Cable Length
Color Code Standard
Mounting Style
Probe Diameter
Features
Spécifications du produit
Description
Les thermocouples avec surface adhésives OMEGA ont maintenant été améliorés pour inclure le populaire connecteur miniature avec notre rouleau embobinant breveté. Ce rouleau fournit un moyen de ranger le fil thermocouple non nécessaire pour les essais. Spécifications :
Calibrations des thermocouples: J (Fer-Constantan), K (CHROMEGA™-ALOMEGA™), T (Cuivre-Constantan), E (CHROMEGA™-Constantan)
Adhésif : colle à base de silicone
Température maximale : 175°C (350°F) à long terme
Température minimale : -60°C (-75°F) à long terme
Dimensions : 25 [longueur] x 19 [largeur] x 0.3 [épaisseur] mm (1 x 0.8 x 0.01")
Laminés : Polymère de haute température, et fibre de verre renforcée de couche de polymère
Fil : fil de calibre 30 recouvert de PFA
Rated 5 out of
5
by
PillarofIN from
Inexpensive monitoring
Purchased the thermocouples with 120 inch cable to monitor bearing temperatures on inaccessible vacuum pumps. For $20 each it is an extremely cost effective way to monitor these devices.
Date published: 2016-08-08
Rated 5 out of
5
by
bobby38 from
Very Accurate
I use these all the time in wireless temperature transmitters, work great!
Date published: 2016-03-20
Rated 4 out of
5
by
SSmith from
Well Made, Inexpensive
Well made for something that can be disposable because it does not cost much.
Date published: 2021-03-26
Rated 5 out of
5
by
Anonymous from
Small J Type Thermocouple
I was looking for a very small, J type thermocouple that would fit flat against a glass surface without an air gap. This self adhesive thermocouple, model SA1-J-72 met all of my needs and I was very relieved that it has 72" leads which is a big plus.
Date published: 2021-03-04
Rated 1 out of
5
by
gewissler from
not very adhesive
poor adhesion. would not stick to cleaned stainless steel pipe
Date published: 2020-12-02
Rated 5 out of
5
by
Anonymous from
Sticky as Maple Syrup.
When the surface is cleaned and prepped properly, these will stick to just about anything. Be careful contaminating them with your finger tips -- usually can only get one good use out of them before they lose their tackiness which is to be expected.
Date published: 2020-09-30
Rated 5 out of
5
by
Dale Zink from
Review of Surface Thermocouples
Nice quality device. Each TC was individually wrapped. The connector end has a professional looking strain relief on it. The only thing that might be an issue (and it could be either a positive or a negative), is the connector itself is sealed. On the one hand, users can't get into it and mess up the connections. On the other hand, if something does go wrong with the connections inside the connector, it isn't easily repairable and may not be repairable at all requiring the replacement of the device.
Date published: 2020-09-30
Rated 5 out of
5
by
Dock from
Great product!
Great product! Too bad you’re website is garbage! Please go back to the old one! I can find anything!
Date published: 2020-07-02
Does the adhesive contain silicone?
The PSA is a Silicon based adhesive
Date published: 2021-02-15
Are these thermocouples suitable for an outdoor application? Specifically installation on the back of a solar panel for extended periods of time (> 6 months).
Yes, I have used these for that exact application with some Kapton tape on the TC and they work well.
Date published: 2020-05-20
Can I use this Thermocouple and connector with the wireless unit SS-002-0-NA?
Thank you for your question. You have to purchase the model thermocouple with stripped leads because SS-002-0-NA has screw terminals for wire connection.
Date published: 2020-09-05
Can this thermocouple be installed in a cylindrical metal surface? Cylinder diameter range 6-in to 12-in
Yes this Thermocouple can be installed on a cylinder and most curved surfaces.
Date published: 2020-09-08
Can this thermocouples work properly in a surface underwater?
Thank you for your inquiry. This product is not suitable for water submersion.
Date published: 2020-10-05
Are these suitable for a Class 1, Div. 2 environment???
Thank you for your inquiry. This product is not rated for a Class I, Division 2 environment.
Date published: 2020-11-18
looking for cost and spec sheet for a SA1-T adhesive mount
Thank you for your inquiry obewan80. Here is the link for the SA1-T: https://www.omega.com/en-us/temperature-measurement/temperature-surface-sensors/sa1/p/SA1-T. You can find the price and data sheet on this web page. If you have any other questions, please do not hesitate to contact us directly at 1-800-622-2378, ask for Temperature Engineering or temp@omega.com.
Date published: 2021-02-02
